Panasonic Kx P8410 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx P8410 Operating Instructions Manual. The Panasonic manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 131
131 Care and Maintenance If the communication link between your computer and the printer is working but the printer ejects a blank page when printing from your application or through Windows, make sure that the appropriate driver is installed and that you have selected the printer correctly. Corrective Action Make sure that you plugged in the printer and turned it on. Printer not operating.Trouble Make sure that you connected the interface cable(s) properly. More info to come for these messages. nIf you...
Page 132
132 Make sure that the media thickness switch is set correctly for the installed media( +P. 29). Make sure that you use a high-quality laser paper: 60-105 g/m 2(16-28 lbs.) paper in the media trays and 75-165 g/m2(20-44 lbs.) paper in the multi-purpose tray. Use only recommended transparencies( +P. 167). We cannot guarantee the results of other transparencies. TroubleCorrective Action Frequent media jams. Care and Maintenance Fan the paper or transparencies before installing them in their respective...
Page 133
133 When using the multi-purpose tray, make sure that you have selected the correct media type in the driver or in the Menu mode of the printer panel. Print the Color Calibration Page from the Color Calibration menu in the printer panel. Check the density settings for each color and compare them to the examples on the Color Density Samples. Refer to Setting the Color Density on page 56for instructions on comparing and setting color density. Make sure that the imaging unit stays covered until immediately...
Page 134
134 Care and Maintenance SCSI If trouble occurs when printing using SCSI, confirm that the ASPI Manager is installed. If the ASPI Manager is not installed, you must install it. It is assumed that the Adaptec SCSI host adapter is installed. nWindows 3.1 users Confirm that the SCSI host adapter is installed in your PC correctly. In CONFIG.SYS file, check the following setting. DEVICE = ASPInDOS.SYS (n = 2, 4, 8 etc.) If this setting does not exist in CONFIG.SYS, reinstall SCSI driver using EZ-SCSI (refer...
Page 135
135 nWindows 95 users Confirm that the SCSI host adapter is installed in your PC correctly. Click Startand select Settings, then click Control Panel. Double-click the Systemicon from the Control Panel. Click Device Managertab. If the SCSI host adapter does not exist or displayed with the exclamation mark !, SCSI driver is not installed correctly. Reinstall the SCSI driver (refer to SCSI host adapter users manual). If the SCSI driver is installed correctly, confirm that the printer is recognized by the...
Page 136
136 Care and Maintenance nWindows NT 4.0 users Confirm that the SCSI host adapter is installed in your PC correctly. Click Startand select Settings, then click Control Panel. Double-click the SCSI Adapters icon from the Control Panel. If the SCSI host adapter does not exist, SCSI driver is not installed correctly. Reinstall the SCSI driver (refer to SCSI host adapter users manual). If the SCSI driver is installed correctly, confirm that the printer is recognized by PC using SCSI utility in EZ-SCSI...
Page 137
137 Refer to page 123to clear the jam. Care and Maintenance Error Messages Corrective ActionError Message Install the paper feeder. Close the optional cassette side door. Refer to page 113to clear the jam.Possible Cause Jam at A See front door labelA jam has occurred in the media feed area. Refer to page 116to clear the jam. Refer to page 120to clear the jam. Refer to page 122to clear the jam. Close the front or right side door. Close the left side door. Close the left side door. Install the imaging...
Page 138
138 Communication cannot be established between the printer and your computer.Install a media tray with media in it. Media Tray Empty All Media Tray missing or empty Fuser Unit and Oil Roll Worn outCall for service. Lower Tray Empty Corrective ActionError Message Care and Maintenance Possible Cause Paper Tray Empty Transparency Tray Empty Output Tray Full SIMM Check Error SCSI error Ethernet Card Check Error Imaging Unit Worn out Imaging Unit wearing out Transfer wearing out Fuser Unit wearing out Oil...
Page 139
139 The printer is too hot or room temperature is too high to print Labels. Cyan Toner Empty Error Message Too hot to print Label Remove Label, Cancel jobCorrective Action Yellow toner cartridge is almost empty. Yellow toner cartridge is empty. Care and Maintenance Possible Cause Low Black Toner Low Cyan Toner Low Magenta Toner Low Yellow TonerBlack toner cartridge is almost empty. Cyan toner cartridge is almost empty. Magenta toner cartridge is almost empty. Yellow Toner EmptyReplace the yellow toner...
Page 140
140 Close all applications and turn off the computer, then turn it on again. An illegal error has occurred. KX-P8410 or Printer Driver is in error. Abort printing. Error messagePossible causeRecovery Care and Maintenance Reinstall the KX-P8410 software. 1/16 compression table is not found. Check the cable connection of the printer or turn on the printer. The printer connected with the parallel cable is not recognized. Block 16 table open error: Table file not open! BReprint later when the printer is...