Panasonic Kx P8410 Operating Instructions Manual

101
Using the Printer
Color CMYK Adjustment
To adjust the cyan, magenta, yellow or black color, select Color CMYK Adjustment
in the
Hyper-Tetra Adjustment window.
#Cyan
Adjusts the Cyan density of the image.
$Magenta
Adjusts the Magenta density of the image.
%Yellow
Adjusts the Yellow density of the image.
&Black
Adjusts the Black density of the image.
The setting range of each option is from 0 to 255
Adjust the color by performing the following steps.
Drag each slider left or right or click 
Ior 
H, or...

102
Using the Printer
You can adjust the grayscale density of your output using the Density adjustment
window.
Displaying the Density Adjustment Window
Using the Density Adjustment
n For Windows 95/3.1
Click on theUse density adjustmentcheck box in the Option
tab ( 
+P. 74).
The Density... button is enabled.
ClickDensity...  .
The Density Adjustment window is displayed.
n For Windows NT 4.0
Click onGray Scale Density Adjustment... in the Advancedtab
( 
+P. 82).
The Gray Scale Density Adjustment... button...

103
Using the Printer
#OK button
Makes the adjustment effective and closes the window.
$Cancel button
Cancels the adjustment and closes the window.
%Restore Default  button
Restores the default image.
Adjust the gray scale by performing the following steps.
Drag the slider left/right, or click 
I/
H.
BYou can see the result of the adjustment in the Preview box.
ClickOK  to make the adjustment effective.
1
2
LighterDarker
#$% Preview box 

104
Single sided documents can be printed on both sides of the paper using an
application software, such as Microsoft® Word word processor for Windows 95. The
instructions described here are only for Microsoft Word for Windows 95.
Open document in Word for Windows 95.
From the Filemenu, click Print....
The Printwindow is displayed.
Make sure that Panasonic KX-P8410is selected in the Printer
box, then click  Properties.
The Panasonic KX-P8410window is displayed.
Select Face upin the Output orderbox, then...

105 Place the printed pages in the multi-purpose tray with the pages
face down and top first.
From the Filemenu, clickPrint....
The Print window is displayed.
Click  Properties .
The Panasonic KX-P8410 window is displayed.
Select MPT Paper 2nd Sidefrom the Paper sourcepop-up
menu, then click  OK.
The Panasonic KX-P8410 window is closed.
Select Even Pagesfrom the Printmenu box, then click  OK .
The Printwindow is closed and even pages will be printed on the back side of
the paper.
Using the Printer
6
7...

106
Periodic cleaning of the printer is recommended. The frequency of cleaning is
dependent upon the environment in which the printer is used. You should clean the
printer:
BAt least once a month.
BWhen the printer experiences frequent media jams.
BWhen print quality has deteriorated.
nExternal
Turn the power OFF.
Clean all the covers with a soft cloth. Use any mild commercial
cleaner.
Caution:
BDo not use benzine, thinner, aerosol cleaners, or any abrasive powder.
nInternal
When using isopropyl alcohol...

107
Care and Maintenance
Gently rotate the paper-pick rollers 180° (the paper-pick rollers
are D-shaped) and wipe them with a lint-free cloth that has been
moistened with isopropyl alcohol.
Reinsert the paper feeder (#) and close the left side door ($).
Slide the media tray back into place.
Note:
BIf you have a 2nd Cassette Feeder, 
you may also need to clean the rollers 
for the middle and lower media trays, 
which are accessed through the lower
left side door.
Cleaning the home sensor
If your printer...

108
Care and Maintenance
Remove the imaging unit:
#Loosen the two thumbscrews by turning them
counterclockwise.
$Turn the lower green lever 180° counterclockwise.
%Grasping the front green handle, slide the imaging unit out until
it catches.
&Lift up the left green handle. Pull the imaging unit out of the
printer and cover it to protect it from light exposure.
Important:
BDo not touch the green surface (the right side) or the black belt (the underside).
Finger prints may affect the print quality.
Safety...

109 Use a dry, lint-free cloth to wipe the slot of the sensor.
Reinsert the imaging unit into the printer, holding it by its green
handles. 
Match the arrow on the right side of the imaging unit with the arrow on the
printer, and slightly push the imaging unit into the printer. Then release the left
handle and push the unit in until it stops.
#Turn the lower green lever clockwise 180° to insert the unit
completely and to lock it.
$Tighten the two green thumbscrews by turning them clockwise.
%Close the...

110
Care and Maintenance
When the printer panel indicates that a supply needs to be replaced, make sure that
you have replacement supplies on hand. The printer may continue to print until the
supply is completely used up; then it stops until you replace the indicated supply.
User Replaceable Components
Average lifePrinter component
Monochrome 
60,000 pages
or
Color 
15,000 pages Monochrome 
57,000 pages
or
Color 
14,250 pages Change the Imaging unit soon.Printer panel message
Imaging Unit wearing out...