Panasonic Kx P7305 Operating Instructions Manual

Settings and Printing
Network Network Maintenance and Spec.
Using the Web Administrative Tool
78
Web Administrative Tool enables the ability to manage the device connected to the network. 
For the installation, see Readme as follows.
(1) Insert the printer CD-ROM disk in your CD-ROM drive.
(2) Double click the Readme.txt.
[D (CD-ROM drive letter):\Network\WebTool\English\Readme.txt]
(3) See the system requirement and installation instruction. (To install the Web Administrative 
Tool, Web server is...

Settings and Printing
Network Network Maintenance and Spec.
Using the Web Administrative Tool
79
■On the server computer
1Open the browser (Internet Explorer or Netscape).
2Enter the URL (http://localhost/pademu/) in the Address box and press 
the Enter key.
The Web Administrative Tool screen is displayed.
Or
1Click [Start], select Programs or All Programs, Panasonic and Web 
Administrative Tool, then click Web Administrative Tool.
The Web Administrative Tool screen is displayed.
Displaying the Web...

Settings and Printing
Network Network Maintenance and Spec.
Using the Web Administrative Tool
80
■On the client computer
1Open the browser (Internet Explorer or Netscape).
2Enter the URL [http://(the address of the server)/pademu/] in the 
Address box and press the Enter key.
The Web Administrative Tool screen is displayed. 

Settings and Printing
Network Network Maintenance and Spec.
Appendix
81
Entering the password is required to change the printer's setting, when a password is set in 
the printer.
1Display the Network Setup Tool Window
• To display the Network Setup Tool window, refer to “Step 1: Setting up TCP/IP on the 
computer” on page 8 for Windows or “Step 2: Setting up TCP/IP on the printer” on 
page 43 for Macintosh.
2Click the printer to set the password.
3Click Setup menu and click Network Setup....
• If a...

Settings and Printing
Network Network Maintenance and Spec.
Appendix
82
8Click [OK] to send the setting to the printer.
9Windows: 
Click [Yes] to restart the printer.
Or
Mac: 
Click [OK], then click Setup menu, click Restart the printer and click [OK].
NOTE
• The printer’s password of the printer’s Web Server is same as that of the Network Setup Tool.
1Press PRINT/RESET button on the printer panel more than 2 seconds 
and less than 5 seconds.
Printing a Configuration Page 

Settings and Printing
Network Network Maintenance and Spec.
Appendix
83
It enables to reset the printer's network settings to the factory default settings.
1Display the Network Setup Tool.
• To display the Network Setup Tool window, refer to “[B] Using the Network Setup Tool” 
on page 9 for Windows or “[B] Using the Network Setup Tool (Mac OS 8.5 - Mac OS 
9.2)” on page 44 for Macintosh.
2Click the printer you want to set up in the list.
3Click the Setup menu, then click Network Factory Default....

Settings and Printing
Network Network Maintenance and Spec.
Appendix
84
This section explains how to resolve the common problems you may have with the KX-P7310. 
If KX-P7310 does not operate properly or you are unable to set up with Network Setup Tool, 
we recommend that you print the diagnostic/configuration pages first.
•How to Diagnose Problems(see below)
•Trouble in Windows Environment (TCP/IP)(see page 85)
•Trouble in Windows Environment (NetBEUI)(see page 85)
•Trouble in NetWare Environment(see...

Settings and Printing
Network Network Maintenance and Spec.
Appendix
85
■Trouble in Windows Environment (TCP/IP)
Unable to search KX-P7310 printer using Network Setup Tool.
• Check that the printer is connected to the network correctly.
• In Option of the menu bar in Network Setup Tool, make sure Use TCP/IP Protocol is 
selected.
• Initialize the configuration and set up KX-P7310 again.
• Check the printer is in the same segment with the computer in the network.
Unable to print.
• Check that the printer...

Settings and Printing
Network Network Maintenance and Spec.
Appendix
86
■Trouble in NetWare Environment
Unable to search KX-P7310 using Network Setup Tool.
• Check that the printer is connected to the network correctly.
• In the Option menu bar in Network Setup Tool, make sure Use NetWare Protocol is 
selected.
• Initialize the configuration and set up KX-P7310 again.
Unable to connect to NetWare Server in Remote Printer mode.
• Check the frame type is set correctly.
• KX-P7310 can switch between PSERVER...

Settings and Printing
Network Network Maintenance and Spec.
Appendix
87
■Trouble in Macintosh Environment
Unable to detect KX-P7310.
• Check that the KX-P7310 is connected to the network correctly.
• If the KX-P7310 is on the assigned zone, make sure the zone name is selected from 
"Chooser" .
• Make sure the correct printer driver is loaded.
• Ensure that AppleTalk is checked and is available from the Chooser.
• Check in the AppleTalk control panel that the correct environment being used.
NOTE
•...