Panasonic Kx P7305 Operating Instructions Manual

Settings and Printing
Network Network Maintenance and Spec.
Setup in UNIX
68
2Print
• Print using "lp" command. For details, refer to the Solaris manual.
# lp -d kxp7310lp  

Settings and Printing
Network Network Maintenance and Spec.
Setup in UNIX
69
[For Solaris 2.3x - 2.5x]
1Create Print Queue.
(1) Log in as root.
# login root
(2) Stop print scheduler.
# /usr/sbin/lpshut
(3) Add print server.
Example: Add host name "kxp7310"
# /usr/sbin/lpsystem -RO -t bsd kxp7310
(4) Set up print queue.
Example: Add print queue name "kxp7310lp"
# /usr/sbin/lpadmin -p kxp7310lp -s kxp7310!lp
If you use csh, use "\!". "lp" after "!" is the printer...

Settings and Printing
Network Network Maintenance and Spec.
Setup in UNIX
70
[For HP-UX 9.x and 10.x]
1Set up remote spooler.
(1) Log in as root.
# login root
(2) Disable printer spooler.
# /usr/lib/lpshut
(3) Add the following line to the /etc/inetd.conf.
printer stream tcp nowait root /usr/lib/rlpdaemon -i
(4) Restart inetd.
/etc/inetd -c
2Create print queue.
(1) Log in as root.
# login root
(2) Create print queue "kxp7310lp".
Example: Create print queue "kxp7310lp".
    #...

Settings and Printing
Network Network Maintenance and Spec.
Setup in UNIX
71
[For AIX 4.x.x]
1Create print queue.
(1) Log in as root.
# login root
(2) Add print server.
Example: Add hostname "kxp7310".
# ruser -a -p kxp7310
(3) Start remote printer daemon.
# startsrc -s lpd
# mkitab 'lpd:2:once:startsrc -s lpd'
2Add print queue with smit command.
(1) Perform smit. Move to "Add Print Queues".
# smit mkrque
(2) From the list, select "remote" (printer connected to remote...

Settings and Printing
Network Network Maintenance and Spec.
Setup in UNIX
72
[For BSD UNIX]
The following is an example for Sun OS4.1.3. The command and paths may differ depending
on the OS version. Please refer to the workstation manual.
1Create printer queue.
(1) Log in as root.
# login root
(2) Add an entry for the printer in /etc/printcap file.
Registering printer queue port as “kxp7310lp”.
kxp7310lp:\
:lp=:\
:rm= kxp7310:\
:rp=lp:\
:sd=/usr/spool/kxp7310lp:\
:lf=/usr/spool/kxp7310lp/kxp7310lp_errs:...

Settings and Printing
Network Network Maintenance and Spec.
Setup in UNIX
73
FTP (File Transfer Protocol) is a protocol for transferring files installed on TCP/IP systems.
Perform the following steps.
1Log on the printer.
# ftp PANA (or ftp 172.16.xxx.xxx)
Connected to PANA.
220 KX-P7310 Network Ver xxxx FTP server.
User(PANA:root): root
331 Password required.
Password:
230 User Logged in.
ftp>
2Change the directory to remote print directory using “cd” command.
ftp>cd /lp
250 Command ok.
ftp>
3Change...

Settings and Printing
Network Network Maintenance and Spec.
Using the Printer’s Web Server
74
If an IP Address has been assigned to a printer, you can access the printer's Web Server 
(Embedded Web Server). It allows monitoring or setting the printer.
To display the printer’s Web Server, there are one or two methods.
•From the Network Setup Tool (Windows only)(see below)
•From the Browser (see page 75)
NOTE
• For Windows, use the Internet Explorer 4.x or later / Netscape Navigator 4.04 or later.
For...

Settings and Printing
Network Network Maintenance and Spec.
Using the Printer’s Web Server
75
1Open the browser (Internet Explorer or Netscape).
2Enter the printer’s IP Address in the Address box and press the Enter 
key.
The printer’s Web Server screen is displayed.
(Example)
http://172.16.xxx.xxx/
(screen in Windows)
Displaying the Printer’s Web Server Screen from a Browser 

Settings and Printing
Network Network Maintenance and Spec.
Using the Printer’s Web Server
76
To change the printer's setting,
1Display the Web Server screen (see page 74, 75).
2Click Network Setup in the left pane.
The Enter Network Password window is displayed.
3Ty p e  root in the User name box and click [OK].
•If the password is already set, the password must be entered in the Password box.
4Click the menu item (TCP/IP, NetWare...) and change the setting.
5Click [Submit Query].
6Click [OK]....

Settings and Printing
Network Network Maintenance and Spec.
Using the Printer’s Web Server
77
It is recommended that the password is set so only the network administrator can change the 
configuration. To set the password, proceed to the following steps.
1Perform step 1 - 3 of “Changing the Printer's Settings” on page 76.
2Click General in the right pane.
3Enter the password in the Value box (Max. 7 characters) and click 
[
Submit Query].
4Click [OK].
5Click Restart the Printer in the left pane....