Panasonic KX MB773 User Manual

9. Programmable Features
61
Changing the fax activation 
code
{#}{4}{3}{4}If you wish to use an extension telephone to receive faxes, activate this feature 
and program the activation code.
Important:
LThe fax activation code must be different from the code that you 
programmed on the answering machine.
{0} “OFF”
{1} “ON” (default)
1.{MENU} i {#}{4}{3}{4}
2.Press {1} to select “ON”. i {SET}
3.Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
LThe default code is “;#9”.
LDo not enter “0000”....

9. Programmable Features
62
Resetting fax features to their 
default settings
{#}{4}{5}{9}{0} “NO” (default)
{1} “YES”
To reset the fax features:
1.{MENU} i {#}{4}{5}{9}
2.Press {1} to select “YES”. i {SET} i {SET} i {MENU}
Note:
LThe PC fax reception (feature #443 on page 27) will not be reset.
Feature/CodeSelection
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 62  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 

9. Programmable Features
63
9.4 Copy features
9.5 PC print features
Feature/CodeSelection
Changing the default copy 
resolution
{#}{4}{6}{1}To change the default resolution setting for copying.
{1} “TEXT/PHOTO”: For documents containing both text and photographs.
{2} “TEXT” (default): For documents containing only text.
{3} “PHOTO”: For documents containing photographs, shaded drawings, etc.
Holding the previous page 
layout setting
{#}{4}{6}{7}{0} “DISABLED” (default): Deactivates this feature.
{1}...

9. Programmable Features
64
9.6 Scan features
Feature/CodeSelection
Setting the scan mode for 
Push Scan
{#}{4}{9}{3}{1} “VIEWER” (default): The scanned image will be displayed in the [Multi-
Function Viewer] window.
{2} “FILE”: The scanned image will be saved as a file.
{3} “E-MAIL”: The scanned image will be saved for e-mail attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
Holding the previous 
scanning parameter for Push 
Scan
{#}{4}{9}{4}{0} “DISABLED” (default):...

9. Programmable Features
65
9.7 LAN features (KX-MB783 only)
Feature/CodeSelection
LAN setting with a DHCP 
server
{#}{5}{0}{0}{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED” (default): The following will be allocated automatically using a 
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the 
LAN connection
{#}{5}{0}{1}This feature is available when feature #500 is deactivated.
1.{MENU} i {#}{5}{0}{1} i {SET}
2.Enter the...

9. Programmable Features
66
Setting HTTPD for the LAN 
connection
{#}{5}{3}{4}{0} “DISABLED”: Denies access to the web browser.
{1} “ENABLED” (default): Allows access to the web browser.
Feature/CodeSelection
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 66  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 

9. Programmable Features
67
9.8 Network features (KX-MB783, LAN connection only)
These features can be programmed only by using the web browser.
Note:
LSee the following sections for details on these related features:
– Change password (feature #155 on page 57)
– DHCP mode (feature #500 on page 65)
– IP address (feature #501 on page 65)
– Subnet mask (feature #502 on page 65)
– Default gateway (feature #503 on page 65)
– DNS server #1 (feature #504 on page 65)
– DNS server #2 (feature # 505 on page 65)
–...

10. Useful Information
68
10 Useful Information U se ful  In for m at i on
10.1 Character entry (KX-
MB773/KX-MB783 only)
The dial keypad is used to enter characters and 
numbers.
–Press {} to move the cursor.
– Press dial keys to enter characters and numbers.
–Press {STOP} to erase the character or number 
highlighted by the cursor. Press and hold {STOP} to 
erase all characters or numbers.
– To enter another character located on the same dial 
key, press {>} to move the cursor to the next space, 
then...

10. Useful Information
69
10.2 Status of the unit
10.2.1 Using Remote Control
You can easily operate the following functions from your 
computer.
– Programming the features (page 56)
KX-MB773/KX-MB783 only
– Storing, editing or erasing items in directories (page 
41)
– Storing or erasing items for broadcast transmission 
(page 45)
– Viewing items in the journal report (page 44)
– Storing the journal report as the computer file
– Viewing items in the Caller ID list (page 53)
– Storing caller information...

10. Useful Information
70
LWhen “USER STOPPED” is not displayed, go to 
step 2.
2To cancel printing:
Press {STOP} repeatedly to display “STOP 
PRINTING?”.
To cancel scanning (KX-MB773/KX-MB783 only):
Press {STOP} repeatedly to display “STOP 
SCANNING?”.
To cancel copying:
Press {STOP} repeatedly to display “STOP 
COPYING?”.
To cancel sending or receiving faxes (KX-
MB773/KX-MB783 only):
Press {STOP} repeatedly to display “STOP FAX?”.
To cancel broadcast transmission (KX-
MB773/KX-MB783 only):
Press...