Panasonic Kx Flb751 Operating Instruction Manual

Printing (PC)
51
Transparencies
Use transparencies designed for laser printing. We recommend the following:
3M®CG3300/CG5000
lLoad transparency sheets one page at a time for printing.
lRemove each transparency after printing and place it on a flat surface to cool and to prevent it
from curling.
lClose the paper stacker extender (p. 14) while printing to prevent transparencies from curling.
lDo not re-use transparencies that have already been fed through the fax machine. This includes
transparencies that...

Printing (PC)
52
Side seam
constructionPeel-off stripMultiple flaps
TwistCurlBent-edge
WaveDog-earSelf adhesive
ClaspTransparent window
Insert envelopes
as shown.
Adjust the 
recording 
paper 
guides.
— High quality envelopes of 90 g/m2(24 lb.) paper,
— Envelopes that have thin sharply creased leading
edges, and
— Envelopes that have diagonal seams as shown right.
lYou can load up to 10 envelopes of 90 g/m2 (24 lb.)
paper 
at a time for printing.
lRemove each envelope after printing.
lWrinkles may occur...

Scanning (PC)
53
Using the fax machine as a scanner!
1
Using the auto document feeder
Insert the document (up to 15 pages)
FACE DOWN in the fax machine.
Using the scanner glass
Place the document FACE DOWN on
the scanner glass of the fax machine.
2
Press .
lThe[Panasonic FLM551/FLB751
Series]dialog box will appear.
lIf the dialog box will not appear, check
the connection of the PC and the fax
machine.
3
If necessary, change the setting of
[Scan Configuration], [Custom Scan
Settings],[Contrast]and...

Remote Control (PC)
54
1
Start Multi-Function Station.
2
Select [Remote Control].
lThe[Multi-Function Remote
Control]window will appear.
3
Select the desired tab.
lThe latest data in the fax machine
will be displayed.
4
Perform the desired operation.
lFor details about each function, click
[Help].
lTo stop operation, click [Cancel].
5
Click [OK].
lThe new data will be transferred to
the fax machine and the window will
close.
lYou can also click [Apply]to
continue the next operation without
closing the...

Features Summary
55
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 56–60).
1
Press p.
Display:
2
Select the feature you wish to program.
For basic features(p. 56, 57):
Press (or )until the desired
feature is displayed.
For advanced features(p. 58–60):
Press (or )until the following is
displayed:
then press wand press (or )until
the desired feature is displayed.
l The current setting of the feature will be
displayed.
3
Press +or...

Features Summary
56
Code
#01Setting the date and time
SET DATE & TIME
PRESS SET
See page 17 for details.
See page 18 for details.
See page 20 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails. 
“ON”: The sending report will be
printed out after every transmission.
This setting is also available after
activating FAX ONLYmode (p. 41).
If you are using the unit with an
answering machine, set to 
“5EXT.TAM” (p. 42). #02Setting your logo
YOUR LOGO
PRESS SET
(Up to 30...

Features Summary
57
To select “ON” and enter ID:
1.Press p.
2.Press 
(or )and select this
feature.
3.Press 
+or -to select “ON”.
4.Press 
w.
5.Enter your ID from 1 to 5 digits,
using 0–9, :and #.
6.Press 
w.
7.Press 
p.
CodeFeature & DisplaySettingsHow the unit operates
#13Setting the dialing mode
If you cannot dial, change the
setting depending on your
telephone line service.DIALING MODE
MODE=TONE[±]
TONE
PULSE
(The default setting is in bold type.)
“TONE”: For tone dial service.
“PULSE”: For rotary...

To send a document:
1.Insert the document into the auto
document feeder.
2.Follow steps 1 and 2 above.
3.Press 
+or -to select “ON”.
4.Press 
w.
5.Enter the fax number.
6.Press 
w.
7.Enter the transmission start time.
Press 
*to select “AM” or “PM”.
8.Press 
w.
9.Press 
p.
l To cancel after programming,
press 
{then w.
Features Summary
58
How to set menu options
Programming table
Code
#22Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON[±]
ON
OFF
“NEXTFAX”: This setting is
effective...

1.Follow steps 1 and 2 on page 58.
2.Press +or -to select “ON”.
3.Press 
w.
4.Enter your code from 2 to 4 digits,
using 0–9 and :.
5.Press 
w.
6.Press 
p.
l Do not enter “0000”.
Features Summary
59
A, B, C, D
OFF
#31
Setting the Distinctive Ring pattern
RING DETECTION
MODE=B[±]
See page 44 for details.
CodeFeature & DisplaySettingsHow the unit operates
(The default setting is in bold type.) #39Changing the display contrast
LCD CONTRAST
MODE=NORMAL[±]
NORMAL
DARKER“NORMAL”: For normal contrast
“DARKER”:...

Features Summary
60
CodeFeature & DisplaySettingsHow the unit operates
You can confirm the status of the
other party’s machine.
lIf the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
lThe connecting tone volume
cannot be adjusted. #76Setting the connecting tone
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.CONNECTING TONE...