Panasonic Kx-a271 Eia/Remote Programming And Diagnosis Manual

							(; I &ondi tion> 
(1) An assignable number of One Touch key is fixed beforehand. You cannot exceed it. 
(2) When you copy the data, those of Jack xx-l and Jack xx-2 are regarded as one and they are copied 
together. 
(3) When a single system is operating, you cannot assign the features of Flexible keys of the system 
which is not operating and they are not displayed in the sqeen. 
(4) It is invalid to copy in or from the data which are not displayed. 
T 
0 through 9 * # -, P or p (PAUSE), F or f (FLASH), 
Name 
SPD Direct 
Direct 0 through 9 A through 2 a through z Maximum 
* # ! ? Space . , ’ : ;/+-=$%&@() 10 characters 
0 through 9 * # -, P or p (PAUSE), For f (FLASH), 
S or s (SECRET) Not Stored 
Not Stored 
P-DL Direct 0 through 9 * # -, P or p (PAUSE), F or f (FLASH), Not Stored 
S or s (SECRET) 
For assignable features, refer to page 4-20. 
, 
4-26  
						

							6. DSS 
DSS Off-line KX-TD1232 Both 
, 
Enter DSS no.=[- ] 
m @ f$j 
pg 
gj @ 
@J @j EXE 
cExplanauon> 
DSS (DSS Console Assignment) 
Assigns the feature of DSS buttons of DSS consoles. 
. 
 
(1) Enter DSS number and press ENTER key. The data screen appears. 
(2) Press F8 (EXIT) to return to Station Menu screw. 
TABLE of ITEMS 
Assigning 
Items 
DSS No. Type of Field 
I Selection of parameter 
I Default 
Direct 1 through 8 (for KX-TD1232) 
1 through 4 (for KX-TD816) 1 digit 
Not Stored 
4-27  
						

							Off-line KX-TD1232 Both 
DSS No. 1 
DSS Jack No.- Jack IQ21 
Pair Jack No.3 Jack [Ol] 
DSSOl DSS: 
EXlIlOOJ DSSI7 [092-234X34 ] PFOl [092-321-9876 J 
DSS02 [092-431-2111 
] DSSl8 [092-234-2345 .] PFO2 [092-321-8765 ] 
DSSQ3 MSGWAIT 
DSS19 [092-234-3456 ] PFIl3 1092-321-7654 ] 
Dsw FwDmD Dss20 [092-234-4567 ] PF04 [092-3216543 ] 
DSSOS SAVE DSS21 [092-234-5678 ] PF05 [092-321-5432 ] 
DSS06 ACCOUNT 
DSS22 [092-2344789 ] PFO6 [092-321-4321 ] 
DSSo7 [ 
I ~ss23 I ] PFO7 [092-321-3210 ] 
~~08 i I ~ss24 t ] PFO8 [O92-321-2109 ] 
IbIExJ9 [ ] DSS25 [ ] PF09 [092-321-1098 ] 
DSSlO ( 
I DSS~ I ] PFlO [092-321-0987 ] 
DSSll [ 
] DSS27 [ ] PFll [092-321-0876 ] 
DSS12 [ ] DSS28 [ ] PF12 [092-321-0765 ] 
DSS13 [ 
] DSS29 [ ] PF13 [ 
1 
DSS14 [ 
] DSS30 [ ] PF14 ( 
DSSl5 [ ] DSS31 [ ] PF14 [ 
1 
DSS16 [ 
] DSS32 [’ ’ ] PF16 [ 
1 
Enter numeric code 
H DSS m COPY B 
f# KELP @P-PAG@@-PAG@ 
sAw2 H EXIT 
 
[l] DSS Jack No. 
w71 
Assigns the Jack numbers connected with a DSS console. 
[2] Pair Jack No. 
’  Assigns the paired extension’s Jack number. 
P.371 
 
(1) This program is displayed at every DSS number. 
(2) Move the cursor to the field in which you want to set a parameter. You must select the feature first 
and enter numbers. 
(3) After editing the data, press F7 (SAVE) to save them on the screen into DB file. 
(4) Press F5 (P-PAGE) to return to the previous page. 
(5) ‘Press F6 (N-PAGE) to advance lo the next page. 
(6) Use F2 (COPY) if you want to copy the data of one DSS button in another. 
4-28  
						

							(7) Press FI (DSS) to rctum to the screen to enter DSS number. 
(8) Press F8 (EXIT) to rctum to Station Menu screen. 
 
(1) 
(2) 
(3) 
(4) 
(5) 
(6) 
(7) 
(8) If the number assigned for DSS key is redundant, the previous assignment is cancelled and the new 
entry becomes effective. 
An assignable number of One Touch key is fixed beforehand. You cannot exceed it. 
For KX-TD1232, when you assign extensions cormected*to DSS consoles and paired telephones, 
DSS No.1 through 4 must be connected to one of Jack No. 02 through 32 and DSS No.5 through 8 
must be connected to one of Jack No.33 through 64. (When System Connection is executed, you 
must connect DSS consoles and paired telephones to the same system.) 
uhiple DSS consoles cannot be connected to the same extension. 
The multiple paired telephones can be connected to the same extension. 
When a single system is operating, you cannot assign the features of DSS consoles connected to the 
system unoperating. If you try to assign the features, an error massage appears. 
You cannot assign the jack 01 or the jack number of Manager to a DSS jack. 
The XDP feature must be assigned “Disable” for DSS ports. 
 
The numbers beside the items are program addresses which are used when you program the system by 
proprietary telephones. 
4-29  
						

							Assigning 
Items 
DSS Jack 
NO. 
Pair Jack No 
Flexible 
w 
----- 
----- 
1 1 
(One Touch) ‘ype of Fiel 
Selecting 
and 
Direct 
Selecting 
and 
Direct 
Direct 
---- 
Selecting 
---- 
Direct TABLE of ITEMS 
Selection of parameter 
Disable or [ ] 
(After selecting [ I) 
02 through 64 (for KX-TD1232) 
02 through 16 (for KX-TD816) 2 digits 
Disable or [ ] 
(After selecting [ 1) 
01 through 64 (for KX-TD1232) 
01 through 16 (for KX-TD816) . 
2 digits 
DSS, [ ](means One Touch Key), 
MSG WAIT, FWD/DND, SAVE, ACCOUNT, CONF, ‘AR 
--,,.,----------------- 
EXT=O through 9 2,3 or 4 digits 
____-____L------------- 
0 through 9 * # -. P or p (PAUSE), F or f (FLASH), 
S or s (SECRET) 
The table illustrated below shows all features assignable to Flexible 
Keys. 
DSS Key 
One Touch 
Key 
MESSAGE WAIT Key 
FWD / DND Key 
SAVE Key 
ACCOUNT Key 
CONF Key 
VTR Key 
Default 
Disable 
Disable 
DSSOl :DSS: 
EXT [loll 
Dsso2:Dss: 
MTttCQ1 
. 
DSS32 : &S : 
ml321 
PFol:[ I 
PFO2:[ ] 
. 
. PFl6:[ I 
8 Features marked 
be assigned to each 
Flexible key. 
4-30  
						

							4-4 System 
z;;* -*- - ‘,‘^T .-.. -a-c-+ ..w . . --.-v-e.. -e,... 
The screen illustrated below appears when you select “3. System”. 
System Menu Off-line KX-TD 1232 Both 
-..a.._ OI.Da#ight~“- -’ - 
02. Class of Service 
03. Speed Dial 
04. Absent Message 
05. FIexibIe Numbering 
06. Account Code /Special Carrier 
07. Timer 
08. Voice Mail 
09. Misccllancous 
IO. System Time 
11. Version 
Sclcct the number 
Enter the number, and hit ENTER key 
i-1 
 
. 
(1) Enter the number of the program, and press ENTER key. 
(2) Press F8 (EXIT) to rctum IO Main Menu screen. 
 
An error message appears when you sclcct “10. System Time” or “11. Version” in Batch Editing Mode. 
4-3 1  
						

							01. Day/Night 
Day /Night Off-line KX-TD1232 Both 
Mode 
Day 
Sun 09:OOAM 
Mon 09:OOAM 
Tue 09:OOAM 
Wed 09:OOAM 
Thu 09:OOAM 
Sat 09:OOAM Night 
05:OOPM 
05:OOPM 
05:OOPM 
05:OOPM 
05:OOPM 
05:OOPM 
Kit spacebar to sclcct paramctcr 
 
[l] Mode (Day / Night Scrv& Switching Mode) 
Assigns the method to alternate with the day and night modes. 
’ [2] Time (Day / Night Service Starting Time) 
[loll 
[lo21 
Sets the starting time when you select the automatic switching mode for day/night service. 
 
(1) Move the cursor to the field in which you want to set a paramelcr. 
(2) After editing the data, press F7 (SAVE) to save them on the screen into DB file. 
(3) Press F8 (EXIT) to return to System Menu screen. 
 
The numbers beside the items arc program addrcsscs which arc used when you program the system by 
proprietary telephones. 
4-32  
						

							TABLE of ITEMS 
Disable or [ -]AM /PM 
--------------------- 
4-33  
						

							02. Class of Service 
Class of Service Off-line KX-TD1232 Both 
C TRS-Level Durat TRNSF Call Busy Busy DND Account 
0 
S Day 
1 ul 
2 111 
3 VI 
4 VI 
5 PI 
6 PI 
7 [31 
8 [31 Limit to CO FWD OVRIDOVRID OVRID Code 
Night 
to co 
tiny 
Cl1 
PI 
PI 
PI 
c31 
131 
I41 
[41 Disable Disable Disable Disable Disable Disable Option 
Enable Enable Enable Enable Enable Enable Verify-All 
Disable Disable Disable Disable Disable Disable Verify-Toll 
Disable Disable Disable Disable Disable Disable Option 
Disable Disable Disable Disable Disable Disable Option 
Disable Disable Disable Disable Disable Disable Option 
Disable Disable Disable Disable Disable Disable Option 
Disable Disable Disable Disable Disable Disable Option 
, 
3nter numeric code 
g 
 
[I] TRS-Level Day/Night (Toll Restriction Level - Day /Night) 
[Soo, 5011 
Assigns the level of Toll Restriction during day or night mode. 
[2] Durat Limit (Extension-to-CO Line Call Duration Limit) 
[5021 
Assigns the duration time of an originated outside call to bc limited or not. 
I 
[3] TRNSF to CO (Call Transfer to CO Line) 
[5031 
Assigns transferring to CO to bc made or not. 
[4] Call EWD to CO (Call Forwarding to CO Line) 
15041 
Assigns the Call Forwarding to outside to bc made or not. 
[S] Busy OVRID (Executive Busy Override) 
l50-9 
Assigns Busy Override Service to be valid or not. 
[6] Busy OVRID Deny (Executive Busy Override Deny) 
[5061 
Assigns the Busy Override to be. dcnicd or not. 
4-34  
						

							[7] DND OVRID (Do Not Disturb Override) I5071 I 
Assigns the Do Not Disrurb Service lo be valid or not. 
[8 ] Account Code (Account Code En&y Mode) 
[5081 
Assigns the mode of enlcring the account codes. 
 
(1) Move the cursor to the field in which you warn to set a parameter. 
(2) After editing the data, press P7 (SAVE) to save them on the screen into DB file. 
(3) Use F2 (COPY’) if you want to copy the data of one COS No. in another. 
(4) Press F8 (EXIT’) to return to System Menu screen. 
 
The numbers beside the items are program addresses which are used when you program the system by 
proprietary telephones. 
4-35