Panasonic Integrated Telephone System Kx Ts600 Operating Instructions

11
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp
Display Language
You can select “English” or “Español” as the display language.
Your phone comes from the factory set to “English”.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Scroll to “Change language?” by 
pressing [] or [].
3Press [OK] (Yes key).
4Select “English” or “Español” by 
pressing [] or [].
5Press [OK] (Save key).
 A long beep sounds.
...

Settings
12For assistance, please visit http://www.panasonic.com/phonehelp
Dialing Mode
You can select the dialing mode by programming. If you have touch tone 
service, set to Tone. If rotary or pulse service is used, set to Pulse. Your 
phone comes from the factory set to Tone.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Scroll to “Program ?” by pressing [4] or 
[
3]. Press [OK] (Yes key).
3Scroll to “Set dial mode ?” by...

13
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp
LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. Your 
phone comes from the factory set to 2.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Scroll to “Program ?” by pressing [4] or 
[
3]. Press [OK] (Yes key).
 
3Scroll to “LCD contrast ?” by pressing 
[
4] or [3] and press [OK] (Yes key).
 The current setting is displayed....

Settings
14For assistance, please visit http://www.panasonic.com/phonehelp
Caller ID Number Auto Edit
Once you call back an edited number (p. 23), this unit can automatically edit 
incoming phone numbers from the same area code in the Caller List and 
each time you receive a call. For example, it can ignore the area code of 
calls originating from your area code, so that you can call these numbers 
from the Caller List without dialing the area code. This function only 
applicable for 10 digits of...

15
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp
Time Adjustment (Caller ID subscribers only)
Using this feature, the unit’s date and time setting will be automatically 
adjusted when caller information is received.
You can set the auto time adjustment by programming.
Your phone comes from factory is set to ON.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Scroll to “Program ?” by pressing [4]
or [
3]....

Settings
16For assistance, please visit http://www.panasonic.com/phonehelp
Voice Mail (VM) Tone
If your voice mail service sends a voice mail tone after a new message has 
finished recording, set to “ON”. “ ” icon will flash on the display if a 
message was recorded in your mailbox. You will hear a series of voice mail 
tones then a dial tone after lifting the handset.
(Contact your service provider about your service.)
Set to “OFF” when:
 
— you subscribe the FSK voice mail service.
 — you do not...

17
Basic Operation
For assistance, please visit http://www.panasonic.com/ phonehelp
You can make a call by simply lifting the handset. To hang up, place the 
handset on the cradle.
Using the speakerphone
1Press [SP-PHONE/HEADSET] ,
then dial a phone number.
OR
Dial a phone number, then press
[SP-PHONE/HEADSET] .
 The indicator lights.
 The dialed number is displayed.
 After a few seconds, the display will show 
the length of the call.
 If you misdial, hang up and start again  from step 1. 
2When the...

Making Calls
18For assistance, please visit http://www.panasonic.com/phonehelp
To redial the last number dialed
Using the handset:  Lift the handset  press  [REDIAL].
OR
Press  [REDIAL]   Lift the handset.
Using the speakerphone: Press [SP-PHONE/HEADSET]   
press  [REDIAL] .
OR
Press  [REDIAL]   press [SP-PHONE/
HEADSET] .
To redial using the redial  list (Memory Redial)
The last 20 phone numbers dialed are stored in the redial list.
1. Press [REDIAL] .
 The last number dialed and “ ” are displayed.
...

19
Basic Operation
For assistance, please visit http://www.panasonic.com/phonehelp
To put a call on hold
Press [HOLD].
 The SP-PHONE/HEADSET indicator flashes.
 If using the handset, you can place it on the cradle.
 During the hold, both party will hear music. For canceling music, see page 37.
To release the hold
If the handset is on the cradle, lift the handset.
If the handset is off the cradle, press [HOLD].
If using the speakerphone, press [SP-PHONE/HEADSET].
 If another phone is connected on the...

20For assistance, please visit http://www.panasonic.com/phonehelp
This unit is compatible with a Caller ID service offered by your telephone 
company. If you subscribe to a Caller ID service, the calling party’s 
information will be displayed when the unit is ringing.
The unit can record information of up to 50 incoming calls, including the 
time and date received, in the Caller List. The Caller List information is 
sorted from the most recent to the oldest call. When the 51st call is 
received, the...