Panasonic Hybrid Control Panel Aw Rp501 Operating Instructions

-19-
• Changing Switch Settings on Pan/tilt Head 
qRemove the cover from the pan/tilt head.
* Be careful of the Tally Indicator wire.wShift the mounting direction switches (SW1, SW2) on
the pan/tilt head depending on whether the head is
suspended from the ceiling or mounted on the floor.
They are originally set for suspended installation.
* Do not shift SW3, which is originally set to  If SW3 is
shifted from the original position, no operations can be
controlled from the control panel.ePlace the cover...

-20-
• Shifting Cable Compensation Switch on Pan/tilt
Head
If the distance from the control panel to the pan/tilt head
is longer than 300 meters, set the cable compensation
switch to the ON position by observing the following
procedure.
qRemove the controller connection panel from the
pan/tilt head.
* Be careful of the wires.
wShift the cable compensation switch on the inner side
of the controller connection panel of the pan/tilt head to
the ON position.
ePlace the controller connection panel back on...

-21-
CONNECTIONS• Before making any connection, switch off all the com-
ponents of the system.
• Use the control panel AC Adaptor AW-PS301 (optional)
and Pan/tilt Head AC Adaptor AW-PS300 (optional).
• Use the pan/tilt AW-PH300 and the Color Video
Camera WV-E550 or AW-E560.  To connect the pan/tilt
head to the camera, the Camera Cable AW-CA20T15
(optional) is necessary.
• Locally purchase a DC cable with a nominal cross sec-
tion of 1.25 mm
2or larger that meets the UL specifica-
tions, and connect the...

-22-
ITEM(AWC) UP(ABC)PAGEDOWN
  (BAR)IRIS
G/L  INVIDEO  OUT
ZOOM/FOCUS
REMOTEVD
VIDEO/RGB VBS/HD
    75ON
OFF
CONTROL
EXT DC INSEE MANUALCAUTION
• Connect the iris control cable of the motor-driven zoom
lens to the camera and the remote (zoom/focus control)
cable to the pan/tilt head.  If the remote (zoom/focus
control) cable of the motor-driven zoom lens is con-
nected to the camera, the lens cannot be controlled.• Connect the control panel to the pan/tilt head with the
three coaxial cables (video...

-23-
AC IN
LAMP AC OUT
MIN  250W
MAX 500W
OPTION   SW
CONTROL OUTOPTION   SW
CONTROL INLAMP
CONTROL
OP SC
DC 15V
OUT- +
TALLY
HOT DC12V IN
AUX  CONTROL  IN
VIDEO  IN OUT G/L  OUTVIDEO OUT 1 VIDEO OUT 2
CONTROL CONTROL  OUTPAN/TILT CAMERA
TO CAMERA PAN/TILT HEADG / L  IN
S-VIDEO OUT
PAGEITEM(AWC) UP(ABC)DOWN  (BAR)
IRIS
G/L  IN
VIDEO  OUT
ZOOM/FOCUS
REMOTEVD
VIDEO/RGB VBS/HD
    75
ON
OFF
CONTROL
EXT DC INSEE MANUAL
CAUTION
Connecting the control panel to Color Video Camera
(WV-E550 or WV-E560), Pan/tilt...

-24-
SPEED FOUCUS PA N  /  T I LT
ZOOM
TELE
WIDEFA R
LEFT RIGHTUP
DOWN
NEAR
DEFON
OFF
POWEROPERATE
IRIS
BAR
CAMMODEGAIN AWC
SCENE
FILEABC
AT W
A
B
AUTO/AIWELC LOW MID
MANUON SC H
OFF HIGH AGC
OFF 1 / 100SHUTTER
ON
OFF
LAMPMEMORY
ON
OFF AUTO
MANUON
OFFON
OFFON
OFF ON
OFFON
OFF
WIP
EXT ND OPH / F
1 .
2 .
3 .
4 .
G/L PHASE
PRESET
T.PED
CABLE COMPHybrid Control Panel AW-RP501
2 1345
67891090¡  180¡
0¡       270¡
LEVELTALLY
YC
S-VIDEO
VIDEO
VIDEO
G/L 
G/L
DC 15V
OPTION SWITCH
CONTROL
CONTACT
POWERON
OFF
Color...

-25-
OPERATING PROCEDURES1.Power
Set the power switch on the pan/tilt head AC adapter to
the ON position, then set Power ON/OFF Switch won
the control panel to the ON position.
2. Pan/tilt Limiter Setting for Pan/tilt Head
If there are obstacles around the pan/tilt head, set the
limiters to limit the operating range (pan left and right
ends, tilt up and down ends) of the pan/tilt head.
Note:The switches on the pan/tilt head have been pre-
set before shipment from the factory on the
assumption that the...

-26-
wRight Panning Limiter
Turn the pan/tilt head to the desired right panning limit
with PAN/TILT Lever #8, keep MEMORY Switch @7
depressed, and simultaneously press buttons [4] and
[9] of PRESET Switches @8for 5 seconds or more.
When the desired limit has been set, button [5] of PRE-
SET Switches @8lights.
To reset the limit, keep the MEMORY Switch @7
depressed, and simultaneously press buttons [4] and
[9] of PRESET Switches @8again for 5 seconds or
more.  When the set limit is reset, button [10] of...

-27-
3. Cable Compensation Setting, Genlock and
Total Pedestal Adjustment• Cable Compensation
Signal degradation due to cable length between the con-
trol panel and the pan/tilt head can be compensated for.
qIf the cable length from the pan/tilt head to the control
panel is longer than 300 meters, set the cable com-
pensation switch on the pan/tilt head to the ON posi-
tion.  For details, refer to INSTALLATION OF PAN/TILT
HEAD at page 18 or the Operating Instructions for
Pan/tilt Head.
wConnect a...

-28-
• Genlock AdjustmentTo use the camera in external sync mode, phase adjust-
ment is necessary to match the phases with those of the
other units and camera.  No G/L adjustment is necessary in
case of no genlock.
• Horizontal Phase Adjustment
qSet G/L PHASE ON/OFF Switch !5to the ON position.
Note:When G/L PHASE ON/OFF Switch !5is set to the
ON position, the sync phase of the camera
changes to the settings of G/L PHASE H Control
!8, G/L PHASE Coarse Switch !6, and G/L PHASE
SC Control !7.  Unless G/L...