Home > Panasonic > Camera Accessories > Panasonic Hybrid Control Panel Aw Rp501 Operating Instructions

Panasonic Hybrid Control Panel Aw Rp501 Operating Instructions

Here you can view all the pages of manual Panasonic Hybrid Control Panel Aw Rp501 Operating Instructions . The Panasonic manuals for Camera Accessories are available online for free. You can easily download all the documents as PDF.

Page 31

-29-
·Subcarrier Phase Adjustment
qSet G/L PHASE ON/OFF Switch !5to the ON position.
Note:When G/L PHASE ON/OFF Switch !5is set to the
ON position, the sync phase of the camera
changes to the settings of G/L PHASE H Control
!8, G/L PHASE Coarse Switch !6, and G/L PHASE
SC Control !7.  Unless G/L phase adjustment is
necessary, do not set G/L PHASE ON/OFF Switch
!5to the ON position.
wAdjust G/L PHASE Coarse Switch !6and G/L PHASE
SC Control !7to match the subcarrier color phase of
the video signal output...

Page 32

-30-
•Total Pedestal AdjustmentTotal pedestal adjustment is made to adjust the
pedestals of two or more cameras.  Using an oscillo-
scope or a waveform monitor, adjust the pedestals to 5
IRE (0.035 V) or 7.5 IRE (0.050 V) with T.PED Control
!9.
T.PED
CABLE COMP
YC
T. PED Control
5 IRE (0.035 V) or
7.5 IRE (0.050 V)
4. White Balance Setting• White balance adjustment is necessary when using the
camera for the first time, or if the camera has not been
used for a long period of time.
• Once the white balance...

Page 33

-31-
• Automatic Tracing White Balance Control (ATW)
When AUTO/ATW ATW Switch iis pressed, the white
balance is automatically adjusted even if the light
source or color temperature changes, thus reproducing
a natural image.
Note:The white balance may deviate if there is nothing
white in the image.  The white balance may not be
fully adjusted depending on the light source or
color temperature.
5. Black Balance Setting• Black balance adjustment is necessary when using the
camera for the first time, or if...

Page 34

-32-
6. Camera and Pan/tilt Head PresettingqPick up a desired object with the camera using
PAN/TILT Lever #8ZOOM Lever #6and FOCUS Lever
#7Select a white balance control mode using
AUTO/ATW ATW Switch iAUTO/ATW A Switch oor
AUTO/ATW B Switch !0.  To store iris data in the mem-
ory, set IRIS AUTO/MANU Switch @5to the MANU posi-
tion and turn the iris control.  When IRIS AUTO/MANU
Switch @5is in the AUTO position, iris data will not be
stored in the memory.
wKeep MEMORY Switch @7depressed (MEMORY Switch...

Page 35

-33-
RACK MOUNTING
èid³
nRack Mounting
Holes for connecting plate
Connecting plateRack angle
Mounting screwMounting screw 

Page 36

-34-
nHow to Change Rear Panel DirectionqRemove the four screws from both sides of the top
cover, and take the top cover off.
wRemove the two screws and take the blank panel off.
eLoosen the rear panel screw, turn the rear panel down,
and fasten it to the bottom.
rFasten the blank panel back to the rear.
Rear panel Remove the top cover.
4 screws (on both sides)
2 screws (on both sides)
Blank panelBlank panel
Rear panel 

Page 37

-35- Source Voltage 12 V DC (DC jack)
Power Consumption 12V, 0.7A
Video Input 1.0 V[p-p] composite/75½(BNC connector)
Genlock Input 1.0 V[p-p] black burst 
75½loop through with auto terminator (BNC connector)
Video Output 1.0 V[p-p] composite/75½x 2 (BNC connector)
S-video Output Y: 0.714 V[p-p] (75 ½)
C: 0.286 V[p-p] burst level chrominance/75 ½(S-VIDEO connector)
Genlock Output 75½(BNC connector)
Camera Control Output Control signal (BNC connector)
Pan/tilt Control Output Control signal (RJ-45 8P...

Page 38

-36- Dimensions 210 (W) x 88 (H) x 177 (D) mm [8-1/4 (W) x 3-1/2 (H) x 7 (D)]
Weight 2.2 kg (4.9 lbs.)
Finish AV Ivory painting
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
ACCESSORIESSeal ........................................................ 1
Rack angle  ............................................. 2Mounting screws .................................. 12
M4 x 8mm  ........................................ 8
M5 x 8mm...

Page 39

Broadcast & Television Systems Company
Division of Matsushita Electric Corporation of AmericaExecutive Office:One Panasonic Way 2E-6, Secaucus, NJ 07094
Regional Offices:
EASTERN ZONE:43 Hartz Way, Secaucus, NJ 07094 (201) 348-7620
CENTRAL ZONE:1707 North Randall Road, Elgin, IL 60123 (847) 468-5200
SOUTHERN ZONE:
Atlanta Region:1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30174
Panazip 11 (770) 338-6841, fax (770) 338-6741
Law Enforcement Video Products:1225 Northbrook Parkway, Suite 1-160,...
Start reading Panasonic Hybrid Control Panel Aw Rp501 Operating Instructions

Related Manuals for Panasonic Hybrid Control Panel Aw Rp501 Operating Instructions

All Panasonic manuals