Panasonic Household Massage Lounger Epma70 Operating Instructions

20
English
 If you want a complete massage
Automatic programs
1
2 1 Press the  button to turn on the 
p o we r.
•  The power is turned off   automatically if 3 minutes or more pass 
without operation. 
2 Press one of the buttons 
(
) to select the program. 
Characteristics of Automatic programs 
(Upper Body)
REFRESH
This is a program to relax your body pleasantly with light 
stimulation mainly by tapping massage.
DEEP
This is a standard program to deeply relax your muscles mainly 
by kneading massage....

21
English1  Body scanning will commence when the program is selected. ( will fl ash.)
•  The body scanning will properly detect height ranges between approximately 55 and 72.8 in. (140 and 185 cm).
1
2
3
4
Sit as far back in the seat as possible with 
your head on the pillow.
Adjust the pillow height so that 
the bottom edge of the pillow is 
at ear level.
See page 19.
1 NECK2  SHOU LDER
3 MIDDLE BACK4  LOWER BACK
Correct Massage Position
The unit will automatically recline to the correct 
massage...

22
English1
4 3
5
6
7 2
1.  Adjusting the reclining angle and legrest 
to massage in a relaxing position
To adjust the reclining angle and the legrest angle:
Adjust by pressing 
 button. 
To adjust the length of the footrest:
Push with  your feet to 
slide the legrest out.
Lift your feet slightly and the legrest returns.
•  See page 35 for a description on how to adjust the  reclining angle and the legrest. 
2.  Turning the air or stretch massage on or 
off
Operation can be turned on/off    by 
pressing...

23
English
Caution
You may not feel the diff  erence in intensity for massage or stretch even if the Back (Intensity) adjustment or Air (Intensity) adjustment 
button is pressed.
•  When the intensity was increased right when the operation has changed.
•  The feeling is diff  erent depending on the person or the position.
4. To repeat the current massage
Contents of current massage action will be repeated by pressing  .
•  The “REPEAT” command may not be accepted when the massage action is changing in...

24
English
1 After the Automatic program has fi nished, 
or when the massage is completed by 
pressing 
 during the program. 
:  Your preferred settings (pages 22–23, 42 (volume)) are  displayed and the User buttons will fl  ash.
2 Select and press one button from 
 to store your settings 
while the buttons are fl  ashing (approx. 
15 seconds). 
•  Selected button will light. (Example: )
  To save your preferences
Automatic programs
You can save your preferred settings set during the Automatic programs,...

25
English
To start a saved program
1 Press the  button to turn on the power.
•  The power is turned off   automatically if 3 minutes or more pass without operation. 
2 Select the User button with your saved settings. 
•  The selected User button will light. (Example: )
Press.
3 Select and press the Automatic program that was saved using the User button. 
(Example: “REFRESH”)
The massage with your stored settings will 
start after body scanning.
•  If you select a diff  erent automatic program than that...

26
English
  To turn the “Heat” massage heads on or off 
 See Caution No. 21 on page 3.
2
1
1 Press the  button to turn on the power.
•  The power is turned off   automatically if 3 minutes or more pass 
without operation. 
2 Press the Automatic program button and start the massage. 
: The “Heat” function is automatically turned on.  
Flashing (Warming up)
Lit (On)
Flashing:  Warming up “Heat” massage heads. 
Lit:  “Heat” massage heads are on.
•  The temperature cannot be adjusted. 
•  The sense of...

27
English
2
34
1
1 Press the  button to turn on the power.
•  The power is turned off   automatically if 3 minutes or more pass without operation. 
2 Select the part you want to massage
( 
 ).
•  The list of body parts that can be selected is  displayed on the left.
(Example) When “NECK” is selected
3 Select the massage action you prefer.
•  The fl ashing frame is the currently selected operation. 
•  The massage technique can also be selected  by repeatedly pressing the area selected in 
Step 2.
• When...

28
English
To change the technique in the middle of a massage
Select your favourite technique in Steps 2 to 4.
•  Press the 
 button within approximately 40 seconds after reselecting the technique in Step 2, otherwise the reselection will be 
cancelled automatically. 
If you want to massage with tap technique only
1  Press the  button to turn on the power. 
2 Select  .
3  Start the tap technique by pressing  .
•  Body scanning will not be performed. 
•  To change the technique, select with Steps 2–4 on...

29
English
4. To turn the “Heat” massage heads on or off
You can turn the “Heat” massage heads on or off   by pressing  .
Flashing:  Warming up “Heat” massage heads. 
Lit:  “Heat” massage heads are on. 
Off  :  “Heat” massage heads off  .
•  The temperature cannot be adjusted. 
•  The sense of warmth from the massage heads will diff  er depending on your body shape,  massage area, massage action, clothing, and ambient temperature. 
•  See page 26 for details about “Heat” massage heads.
3. Adding tapping...