Panasonic Household Massage Lounger Epma70 Operating Instructions

10
English
Display
1
34    
11
2
86
5
7910
1  Massage Area
Current approximate 
massage position 
fl ashes.Currently selected air 
massage operation 
lights up. 
Current air massage 
position fl  ashes.Currently selected 
stretch operation lights 
up. 
Current stretch position 
fl ashes.
2  Voice Guidance Volume
3  Time Remaining
4  Massage Ending
5 Operation
•  Currently performing massage operation is displayed  while massaging.
•  Currently selected operation’s frame is fl ashed when  Manual Operation...

11
English Setting up the massage lounger
1 Where to use the unit
•  Ensure adequate space to recline.
•  Do not expose the massage lounger to direct sunlight or high 
temperatures, such as in front of heating sources, because this can cause 
discolouration or hardening of the synthetic leather.
•  Place the unit on a mat to prevent fl oor damage.
•  When placing a mat under the unit, the size of the mat should be suffi   cient 
[at least 47.2 in. × 27.6 in. (120 cm × 70 cm)] to cover the areas where the...

12
English
Confi  rm that the main unit and all accessories are in the box.
Main unit
Controller
Accessories
Armrests (Right/Left)
Right/Left indication
•  Small holes on the inside fabric are an intentional part of  the functional design.
Comfort cushion
Pillow
Controller Stand
Fixing screw
Clip
Controller Holder
Power Cord
Attachment Screws
(M6 × 13) — Black 4 pcs.
(M6 × 20) — Silver 2 pcs.
Allen Key
(Cross-section) 1/6 in. 
(4 mm)
Sole Shiatsu Sheet
•  This is pre-installed on the sole massage...

13
English Assembly
1 Attaching the controller stand to the right or left side panel
Controller 
Stand
How to tighten the screws
Attachment screw
Hole
•  Tighten the 4 screws lightly 
using your fi  ngers. 
(Make the screws level with 
the holes.)
Allen key •  Tighten fi rmly with the allen 
key.
•  Screw may be damaged if you  tighten the screw inserted 
into the hole crookedly using 
an allen key.

•  Align the 2 prongs of the side  panel with the holes of the 
controller stand. Fasten the controller...

14
English
3 Connecting the air plugs (On both sides)
•  Insert the air plugs into the lower part of the armrest. * Arm massage will not operate unless the air plugs are inserted securely. 
View from bottom
Push on the air plugs 
until you hear it click 
into place.
Air plug jack
Air plug
Front
1 Check for dirt and damage on appliance 
inlet of the power switch section and the 
connector of the power cord.
2 Insert the connector into the appliance inlet.
3 Be sure to push the connector in all the way.
5...

15
English
6 Placing the controller
1 Placing the controller into the controller stand. 
2 Fasten the controller cord using the clip. 
•  Fasten so the cable under the clip will not sag 
too much with the backrest raised. 
(Because there is a chance of your legs, etc., 
getting caught) 
11
22
When the controller stand is attached on the left side 
•  Run the controller cord to the left. 
1 Press the  button on the controller to turn on the 
p o we r.
2 Press  button on the controller and hold until 
the...

16
English
7 Fasten the pillow and the comfort cushion. 
1 Fasten the pillow using the fasteners. 
•  See page 19 for guidelines on positioning the pillow 
during the massage. 
2 Fasten the comfort cushion using the zip. 
Pillow Fasteners
Fasteners
Zip
Comfort cushion 

17
English Before sitting down
Check the following before using the unit
1 Check the surrounding area. 
Make sure there are no objects, people, or pets in the vicinity of the unit.
2 Flip up the comfort cushion and deploy the leg/sole massage section.  
 See Caution No. 3 on page 2, and No. 17 and 18 on page 3.
•  Do not massage with the comfort cushion  still on the backrest.
Comfort cushion
How to deploy the leg/sole massage section
1  Pull the release lever in the direction of the arrow. 
2  Rotate...

18
English
4 Switching on the power supply
1 Insert the power plug into an electrical socket.
2 Turn the lock switch key to the “open” position.
3 Slide the power switch to the “on” position.
23
1
5 Check the unit. 
1 Make sure there are no tears or rips in the fabric.
 See Caution No. 15 on page 3.
Fabric
Backrest
Comfort 
cushion
2 Make sure there is no foreign matter between  the parts of the unit.
 See Caution No. 17 on page 3.
Hand/Arm massage 
section Retracted position
Check
Legrest
3 Make sure...

19
English
6 Adjust the pillow position. 
1 Remove the pillow. 2 Adjust the height of the pillow so that the bottom edge is at ear level.
•  If positioned too low, the pillow may interfere with a massage 
of the area around the neck.
•  When the reclining angle changes, the position of the pillow  may shift. In that case, readjust the position.
Pillow
Lower edge of the pillow
Ear level
7 Slide the sole massage section to your preferred position. 
Push with your feet to slide the legrest out.
Lift your...