Panasonic Home Network_system_ Users Guide

							Hub (KX-HNB600)
RJoins all system devices together
R Connects to your landline for making and receiving calls
R Supports SD card connection for recording camera video and audio
11
Welcome to the Panasonic Home Network System!   
						

							Indoor Camera (KX-HNC200, KX-HNC210)
RFull-color camera with night vision and built-in microphone for live monitoring and recording
R Built-in motion sensor (visual detection), sound sensor, and temperature sensor can be used to trigger
other actions (camera recording, turning on a light, etc.)
R Built-in microphone and speaker for two-way communication
12
Welcome to the Panasonic Home Network System!   
						

							Outdoor Camera (KX-HNC600)
RFull-color camera with night vision and built-in microphone for live monitoring and recording
R Built-in motion detection features (image sensor and infrared sensor) can be used to trigger other
actions (camera recording, turning on a light, etc.)
R Built-in microphone and speaker for two-way communication
R Splash-proof design for outdoor installation
13
Welcome to the Panasonic Home Network System!   
						

							Window/Door Sensor (KX-HNS101)
RDetects when the corresponding window or door is opened
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
14
Welcome to the Panasonic Home Network System!   
						

							Motion Sensor (KX-HNS102)
RUses an infrared sensor (i.e., heat sensor) to detect motion in the surrounding area
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
15
Welcome to the Panasonic Home Network System!   
						

							Water Leak Sensor (KX-HNS103)
RUses a small probe that can detect water
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
16
Welcome to the Panasonic Home Network System!   
						

							Indoor Siren (KX-HNS105)
RUses a loudspeaker and strobe light to alert you when the alarm system is triggered
R You can enable and disable the loudspeaker and strobe light for each siren
17
Welcome to the Panasonic Home Network System!   
						

							Smart Plug (KX-HNA101)
RCan be turned on and off using the app, when a sensor is triggered, or according to a schedule
R Built-in overcurrent and overwattage detection for added peace of mind
R Power consumption is logged for your reference
18
Welcome to the Panasonic Home Network System!   
						

							Digital Cordless Handset (KX-HNH100)
RMakes and receives calls using your landline
R Can be used to change the system’s arm mode
R Displays system status
19
Welcome to the Panasonic Home Network System!   
						

							There are 4 basic steps you need to perform in order to access the system from your mobile device.Connections¯Connect your hub to a power outlet and to your telephone line. *1Download
¯Download the  [Home Network]  app to your mobile device.Initial setup
¯Use the  [Home Network]  app to configure the hub to connect to your
wireless router, and then register your mobile device to the hub.Register devicesAdd more mobile devices (smartphones and tablets), cameras,
sensors, and other devices to the system.
*1 Refer to the System Setup Guide included with your hub for more information.
Download information is available at the web page listed below.
{{"www.panasonic.net/pcc/support/tel/homenetwork/"|tolink("http://www.panasonic.net/pcc/
support/tel/homenetwork/")}}
Requirements
– Hub (KX-HNB600)
– A wireless router
– A compatible mobile device
Compatible mobile devices
– iPhone 4 and later, iPad (iOS 6.0 and later)
– Android smartphones and tablets (Android 4.0 and later)
– Minimum recommended screen size: 1280 ´720 (screen content may not be displayed properly on
devices with smaller screens)
Note:
R The  [Home Network]  app may not function properly depending on the system environment, such as
the model of your mobile device, the peripherals connected to your mobile device, and the apps
installed on your mobile device.
R The following Android devices are not compatible with the  [Home Network] app.
– Android devices that are not supported by Google Play
– Android devices with limited hardware features (Bluetooth, Wi-Fi, and microphone support are required.)
In order to use your mobile device to access the system, you must first configure the hub to access your
wireless router.
Note:
R If your hub is already configured to access your wireless router, you do not need to perform this
procedure again.
R If you have completed this procedure and want to register another mobile device to the hub, see
“Registering other mobile devices to the hub”, Page 23.
R If you experience trouble while performing this procedure, refer to the information in  “Sometimes I
cannot access the system while at home”, Page 99.
20
System setup