Panasonic Home Network System Hd Camera Kx Hnc800 Installation Guide

							network conditions and wireless
sig
nal quality.
R This product may be used in
ways that violate the privacy or
publicity rights of others. You
are responsible for the ways in
which this product is used. For best
per

formance Product location/avoiding noise
Th
i

s product uses radio waves to
communicate with a wireless
router.
R For maximum coverage and
noise-free communications,
place this product:
– at a convenient, central
location with no obstructions
between this product and the
wireless router.
– away from electronic appliances such as TVs,
radios, personal computers,
wireless devices, or other
phones.
– facing away from radio frequency transmitters, such
as external antennas of
mobile phone cell stations.
(Avoid putting this product on
a bay window or near a
window.) R
Coverage and transmission
qu
 ality depends on the local
environmental conditions.
R If the transmission quality is not
satisfactory, move this product
to another location. Environment
R
K
ee

p the product away from
electrical noise generating
devices, such as fluorescent
lamps and motors.
R The product should be kept free
from excessive smoke, dust,
high temperature, and vibration.
R Do not expose this product to
direct sunlight or other forms of
powerful light such as halogen
lights for long periods of time.
(This may damage the image
sensor.)
R Do not place heavy objects on
top of the product.
R When you leave the product
unused for a long period of
time, unplug the product from
the power outlet.
R The product should be kept
away from heat sources such
as heaters, kitchen stoves, etc.
It should not be placed in rooms
where the temperature is less
than 0 °C (32 °F) or greater
than 40 °C (104 °F). Damp
basements should also be
avoided.
For assistance, please visit http://shop.panasonic.com/support 11Important Information
HNC800_(en_en)_0902_ver.220.pdf   112016/09/05   17:54:30 
						

							R
The maximum communication
ra
nge may be shortened when
the product is used in the
following places: Near
obstacles such as hills, tunnels,
underground, near metal
objects such as wire fences, etc.
R Operating the product near
electrical appliances may cause
interference. Move away from
the electrical appliances. Other information
Routine care
R
Wi p

e the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or
any abrasive powder. Camera image quality
R
Ca m

era images may have the
following characteristics.
– Colors in images may differ from the actual colors.
– Faces or objects may appear dark when there is light
behind the subject (i.e.,
backlighting).
– Image quality may be reduced in dark locations.
– Images may appear hazy when there are outdoor lights
in use. Protecting your recordings
R
Do  

not remove the microSD
card or disconnect the product’s
AC adaptor while reading or
writing data to the microSD
card. Data on the card could
become corrupted.
R If a microSD card malfunctions
or is exposed to
electromagnetic waves or static
electricity, data on the card
could become corrupted or
erased. Therefore, we
recommend backing up
important data to a computer or
other device.
12 For a
ssistance, please visit http://shop.panasonic.com/support Important Information
HNC800_(en_en)_0902_ver.220.pdf   122016/09/05   17:54:30 
						

							Notice
For assistance, please visit http://shop.panasonic.com/support
13Important InformationHNC800_(en_en)_0902_ver.220.pdf   132016/09/05   17:54:30  
						

							Part names and functions
A
Brightness sensor
All
ows the camera to switch automatically
to night vision mode in low-light conditions.
B Lens
C Privacy shutter
Pr
e

vents others from monitoring live
camera images or sound when the shutter
is closed.
D Microphone
E LED indicator
F microSD card slot
G Stand
H MS ETUP
N
U s

ed when performing initial setup.
I Speaker
J micro-USB connector
Us
e

d to connect the AC adaptor to the
camera.
K Reset button
Use

d to reset the camera’s settings.
L Temperature sensor
14 For a
ssistance, please visit http://shop.panasonic.com/support Setup
HNC800_(en_en)_0902_ver.220.pdf   142016/09/05   17:54:30A B C D L
F H I
G
E
K
J  
						

							LED indicator
Yo
u
 can use the LED indicator to confirm the camera’s status. Indicator Status
Off No power, or LED indicator is turned off *
1
B l

ue, lit Normal operation, connected to wireless
rou

ter*1
, privacy shutter is open
White, lit Normal operation, connected to wireless
rou

ter*1
, privacy shutter is closed
White, blinking quickly Camera is searching for wireless router
Green, lit Initial setup required
Green, blinking slowly Initial setup is in progress with mobile device con

nected
Green, blinking Initial setup is starting
Red, lit Motion detected*1
, 
 or camera is starting up
Red, blinking slowly Live images are being viewed or recorded, or cam

era is starting up
Red, blinking Device malfunction *1 You can configure the camera so that its LED indicator does not light
dur
 ing normal operation or when motion is detected. For more
information, refer to the User’s Guide (page 31).
For assistance, please visit http://shop.panasonic.com/support 15 Setup
HNC800_(en_en)_0902_ver.220.pdf   152016/09/05   17:54:30 
						

							Connections
1 Insert the AC adaptor plug
( A ) 
firmly into the camera’s
micro-USB connector.
2 Connect the AC adaptor ( B)
to the power outlet.
3 Insert a microSD card
(user-supplied;  C) into the
camera’s microSD card slot.
(This is not necessary if you do not want to record camera
images.) Note:
R
Use

 only the supplied AC adaptor S006AKU0500100.
R To remove the microSD card, push in the microSD card and then
remove it. Note about power connections
AC adaptor connection
R
Th e

 AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
R The AC adaptor should be connected to a vertically oriented or
floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected. Power failure
R
Th e

 camera will not work during a power failure.
16 For assistance, please visit http://shop.panasonic.com/support Setup
HNC800_(en_en)_0902_ver.220.pdf   162016/09/05   17:54:30BCA  
						

							Setup overview
Af
t
er you have connected your camera, here is what you will need to do
in order to access it from your mobile device. Each procedure is
explained in this chapter. Using the camera by itself
( n o

 integration with a Home
Network System) Integrating the camera with a
H
om
e Network System
(registering to a KX-HNB600 hub)
1 Download (page 18)
Do

wnload the  [Home
Network]  app to your mobile
device.
2 Set up the camera
(page 19) Use the  [Home Network]  app
to configure the camera to
connect to your wireless
router, and then register your
mobile device to the camera.
3 (Optional)
Register additional mobile
devices (page 23)
You can register additional
mobile devices to the camera,
for a total of 8. 1
D
ownload (page 18)
Do wnload the  [Home
Network]  app to your mobile
device.
2 Set up the hub
Refer to the System Setup
Guide included with your hub.
3 Register camera to hub
(page 24) Use the  [Home Network]  app
to register the camera and
configure it to connect to your
wireless router. For assistance, please visit http://shop.panasonic.com/support
17 Setup
HNC800_(en_en)_0902_ver.220.pdf   172016/09/05   17:54:30 
						

							Downloading the
[H
o
me Network]
app
Download information is available
at the web page listed below.
www.panasonic.net/pcc/support/
tel/homenetwork/ Using your device’s app store
iP
h

one, iPad users
Search for “Panasonic Home
Network System”. iPad users
should search in the “iPhone only”
category.
Android™ device users
Search for “Panasonic Home
Network System”. Compatible mobile devices
iP
h

one 4 or later, iPad, or iPad
mini (iOS 6.0 or later) or an
Android device (Android 4.0 or
later)
Note:
R The  [Home Network]  app may
not function properly depending
on the operating environment, such as the model of your
mob

ile device, peripherals
connected to your mobile
device, and the apps installed
on your mobile device.
R The following Android devices
are not compatible with the
[Home Network]  app.
– Android devices that are not supported by Google Play™
– Android devices with limited hardware features (Bluetooth,
Wi-Fi, and microphone
support are required.)
18 For assistance, please visit http://shop.panasonic.com/support Setup
HNC800_(en_en)_0902_ver.220.pdf   182016/09/05   17:54:30  
						

							Setting up the
ca
m
era (initial
setup)
Confirm the following before you
begin.
– Make sure you have installed the  [Home Network]  app on
your mobile device
– Make sure the camera is located within range of your
wireless router
– Make sure your mobile device is connected to your wireless
router
– Make sure your mobile device can connect to the Internet
– Make sure you know the network name (SSID) and
password assigned to your
wireless router Initial setup (for iPhone, iPad
us
e

rs)
R Do not perform this procedure
i f

 you want to integrate the
camera with your Home
Network System. Use the
procedure on page 24.
R If your mobile device is
already registered to a hub
and you want to use your
camera by itself, see
“Information for current hub
users”, page 22. 1
P
lug in the camera and wait
a b

out 1 minute for the
camera’s LED to light in green.
R If the LED does not light in
green, or if you experience
trouble during this
procedure, reset the
camera (page 25) and
then repeat this procedure.
2 Start the  [Home Network]
app.
R If prompted, follow the
on-screen instructions and
select the appropriate
region/country.
3 Tap  [HD Camera] .
4 Tap  [Set up the HD Camera] .
5 When prompted, press the
MSETUP N button on the back
For a ssistance, please visit http://shop.panasonic.com/support
19 Setup
HNC800_(en_en)_0902_ver.220.pdf   192016/09/05   17:54:31 
						

							of the camera, and then tap
[Ne
xt].
R The LED indicator blinks in
green.
6 Change your mobile device’s
Wi-Fi setting temporarily so
that it connects to the camera
directly.
ROpen your mobile device’s
[Settings]  app, tap [Wi-Fi],
select
“KX-HNC800_Panasonic”,
enter “00000000” as the
password, and then tap
[Join] .
R If more than 1 item named
“KX-HNC800_Panasonic” is
displayed, wait approx. 10
minutes and perform this
procedure from the
beginning.
7 Start the  [Home Network]
app again.
8 If necessary, enter the
password required to connect
to your wireless router and
then tap  [Next].
R The camera and your
mobile device connect to
your wireless router.
R If prompted, follow the
on-screen instructions and
connect your mobile device
to your wireless router, start the app again, and then tap
[A
d
d This Mobile Device] .
R If you enter the wrong
password, an error is
displayed. Repeat the initial
setup procedure from the
beginning.
9 When prompted, press the
MSETUP N button on the back
of the camera.
R The camera registers your
mobile device.
10 When prompted, set the
password that will be used to
access the camera.
11 When prompted, enter a
name for your mobile device
and then tap  [OK].
R This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R A list of all cameras
registered to the app is
displayed when initial setup
is complete.
20 For a
ssistance, please visit http://shop.panasonic.com/support Setup
HNC800_(en_en)_0902_ver.220.pdf   202016/09/05   17:54:31