Panasonic Home Network System Hd Camera Kx Hnc800 Installation Guide

							Installation Guide
Home Network System
HD Camera
Model No.    KX-HNC800 Thank you for purchasing a Panasonic product.
This document explains how to configure the camera and access it
using a mobile device. These steps must be followed before you can
use  the 
camera. 
For details about how to use the camera, refer to the
User’s Guide (page 31). Please read this document before using the unit and save it for future
reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web
site: http://shop.panasonic.com/support
 for customers in the U.S.A.Please register your product: http://shop.panasonic.com/support
In order to use this device, download the latest version of the  [Home
Network] app.
Printed in China
HNC800_(en_en)_0902_ver.220.pdf   12016/09/05   17:54:30     
						

							Introduction
Accessory information 
...............3
Important Information
Graphical symbols for use on
equipment and their
descriptions  ...............................6
About this system ......................7
For your safety ........................... 7
Important safety instructions ...... 9
Security cautions  .......................
9
For best performance .............. 11
Other information ..................... 12
Setup
Part names and functions  ........14
LED indicator  ........................... 15
Connections .............................16
Setup overview  ........................17
Downloading the [Home Network]
app ...........................................18
Setting up the camera (initial
setup) .......................................19
Registering additional mobile
devices to the camera ............. 23
Registering the camera to your
hub ...........................................24
Resetting the camera  ..............25
Appendix
Information about wireless
communication  ........................26
Information about sensor
features ....................................27
Information about night vision
mode ........................................29
Wall mounting  .......................... 29 Adjusting the angle 
..................29
Removing the stand .................30 Accessing the User’s Guide 
....31
Specifications  .......................... 32
Open source software notice  ...33
Software information ................33
FCC and other information  ......34
Customer services  ...................36
Limited Warranty (ONLY FOR
U.S.A.)  ..................................... 37
2 Table of Contents
HNC800_(en_en)_0902_ver.220.pdf   22016/09/05   17:54:30 
						

							Accessory information
Supplied accessories
AC adaptor
Pa
r
t number: PNWYAHNC800 Other information
R
De s

ign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual
product. Trademarks
R
mi
c

roSDXC Logo is a trademark of SD-3C, LLC.
R iPhone and iPad are trademarks of Apple Inc., registered in the U.S.
and other countries.
R iPad mini is a trademark of Apple Inc.
R Android and Google Play are registered trademarks or trademarks of
Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered
trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
R Wi-Fi ®
, WPA™, and WPA2™ are registered trademarks or
trademarks of Wi-Fi Alliance ®
.
R All other trademarks identified herein are the property of their
respective owners.
For a ssistance, please visit http://shop.panasonic.com/support
3Introduction
HNC800_(en_en)_0902_ver.220.pdf   32016/09/05   17:54:30  
						

							Notice
R
Th e
 camera supports microSD, microSDHC, and microSDXC memory
cards. In this document, the term “microSD card” is used as a generic
term for any of the supported cards. Integration with the Panasonic Home Network System
Al
t

hough you can use the camera by itself, it can also be integrated into
the Panasonic Home Network System.
What is the Panasonic Home Network System?
The Panasonic Home Network System is a wireless system that uses
DECT technology to create a powerful network of devices, including
motion sensors, window/door sensors, smart plugs, etc., and allows you
to control them all with an easy-to-use app.
What are some example uses?
– Use the system’s sensors to trigger camera recording Camera images can be recorded automatically when a door is
opened, when motion is detected, etc.
– Use the camera’s motion sensor to trigger the alarm system You can receive a phone call and notification when the camera’s
motion sensor detects motion.
What do I need to get started?
Your HD camera (up to 16) and a KX-HNB600 hub. The hub joins all
system devices together using DECT technology, connects to your
home network via your wireless router, and can also connect to your
landline.
4 For assistance, please visit http://shop.panasonic.com/support Introduction
HNC800_(en_en)_0902_ver.220.pdf   42016/09/05   17:54:30 
						

							What other devices are available?
– Ac
tivity detection sensors, such as motion sensors and window/door
sensors
– Smart plugs, which can turn electric devices on when triggered by a sensor or according to a schedule
– and more! For information about the latest devices and bundles, visit the website
bel

ow.
http://shop.panasonic.com/
Note:
R Device availability and appearance may vary by region.
For assistance, please visit http://shop.panasonic.com/support 5Introduction
HNC800_(en_en)_0902_ver.220.pdf   52016/09/05   17:54:30KX-HNB600KX-HNB600  
						

							Graphical symbols for use on equipment
an
d
 their descriptions Symbol Explanation Symbol Explanation
Alternating current
(A .

C.) Class 
P equipment
( e
quipment in which
protection against
electric shock relies on
Double Insulation or
Reinforced Insulation) Direct current (D.C.) “ON” (power)
Protective earth “OFF” (power)
Protective bonding
ea
r

th Stand-by (power)
Functional earth “ON”/“OFF” (power;
pu
s

h-push) For indoor use only Caution, risk of electric
sh
o

ck 6
For assistance, please visit http://shop.panasonic.com/support Important Information
HNC800_(en_en)_0902_ver.220.pdf   62016/09/05   17:54:30             
						

							About this system
R
Th i
s system is an auxiliary
system; it is not designed to
provide complete protection
from property loss. Panasonic
will not be held responsible in
the event that property loss
occurs while this system is in
operation.
R This product should not be used
as substitute for a medical or
caregiver’s supervision. It is the
caregiver’s responsibility to stay
close enough to handle any
eventuality.
R The system’s wireless features
are subject to interference,
therefore functionality in all
situations cannot be
guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs
in the event of wireless
communication error or failure. For your safety
To
 

prevent severe injury and loss
of life/property, read this section
carefully before using the product
to ensure proper and safe
operation of your product.  WARNING
Power connection
R
Us e

 only the power source
marked on the product.
R Do not overload power outlets
and extension cords. This can
result in the risk of fire or
electric shock.
R Completely insert the AC
adaptor/power plug into the
power outlet. Failure to do so
may cause electric shock and/
or excessive heat resulting in a
fire.
R Regularly remove any dust, etc.
from the AC adaptor/power plug
by pulling it from the power
outlet, then wiping with a dry
cloth. Accumulated dust may
cause an insulation defect from
moisture, etc. resulting in a fire.
R Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These
conditions can cause fire or
electric shock. Wait for the
product to stop emitting smoke,
then visit the following web
page and contact Panasonic for
support.
http://shop.panasonic.com/
support
For a ssistance, please visit http://shop.panasonic.com/support
7Important Information
HNC800_(en_en)_0902_ver.220.pdf   72016/09/05   17:54:30  
						

							R
Unplug from power outlets and
ne
ver touch the inside of the
product if its casing has been
broken open. Danger of electric
shock exists.
R Never touch the plug with wet
hands. Danger of electric shock
exists.
R Do not connect non-specified
devices. Installation
R
T
o 

prevent the risk of fire or
electrical shock, do not expose
the product to rain or any type
of moisture.
R Do not place or use this product
near automatically controlled
devices such as automatic
doors and fire alarms. Radio
waves emitted from this product
may cause such devices to
malfunction resulting in an
accident.
R Do not allow the AC adaptor
cord to be excessively pulled,
bent or placed under heavy
objects.
R Keep small parts, such as
microSD cards, out of the reach
of children. There is a risk of
swallowing. In the event they
are swallowed, seek medical
advice immediately. Operating safeguards
R
Un p

lug the product from power
outlets before cleaning. Do not
use liquid or aerosol cleaners.
R Do not disassemble the product.
R Never put metal objects inside
the product. If metal objects
enter the product, turn off the
circuit breaker and contact an
authorized service center. Medical
R
Co n

sult the manufacturer of any
personal medical devices, such
as pacemakers or hearing aids,
to determine if they are
adequately shielded from
external RF (radio frequency)
energy. Wireless
communication features
operate between the
frequencies listed below, with a
peak transmission power of
100 mW.
2.412 GHz – 2.462 GHz
5.180 GHz – 5.320 GHz
5.500 GHz – 5.700 GHz
5.745 GHz – 5.825 GHz
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you
not to do so. Hospitals or health
care facilities may be using
equipment that could be
sensitive to external RF energy.
8 For assistance, please visit http://shop.panasonic.com/support Important Information
HNC800_(en_en)_0902_ver.220.pdf   82016/09/05   17:54:30 
						

							 CAUTION
Installation and location
R
Ne v
er install wiring during a
lightning storm.
R The AC adaptor is used as the
main disconnect device. Ensure
that the AC outlet is installed
near the product and is easily
accessible.
R To avoid the risk of
strangulation, keep the product
and the AC adaptor cord at
least 1 m (3 feet) from a child’s
crib and out of the reach of
small children.
R Mount the product on the stable
location where the camera can
be adequately supported when
installing.
R Do not mount the product on
soft material. It may fall down,
break or cause injury.
R Do not mount the product on
the following materials: gypsum
board, ALC (autoclaved
lightweight cellular concrete),
concrete block, plywood less
than 25 mm (1 inch) thick, etc. Preventing accidents and
in
j

uries
R Do not put your ear(s) near the
speaker, as loud sounds emitted from the speaker may
cau

se hearing impairment. Important safety
ins

tructions
When using your product, basic
safety precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
1. Do not use this product near water for example, near a
bathtub, washbowl, kitchen
sink, or laundry tub, in a wet
basement or near a swimming
pool.
2. Use only the power cord indicated in this document.
SAVE THESE INSTRUCTIONS Security cautions
Ta
k

e appropriate measures to
avoid the following security
breaches when using this product.
– Leaks of private information
– Unauthorized use of this product
– Unauthorized interference or suspension of the use of this
product
For assistance, please visit http://shop.panasonic.com/support 9Important Information
HNC800_(en_en)_0902_ver.220.pdf   92016/09/05   17:54:30  
						

							Take the following measures to
avo
id security breaches:
R Configure the wireless router
that connects your mobile
device to this product to use
encryption for all wireless
communication.
R You may be vulnerable to
security breaches if the unit is
used with the login password,
disarm code, or PIN code, or
other settings at their default
values. Configure your own
values for these settings.
R Do not use passwords that
could be easily guessed by a
third party. If you keep a record
of your passwords, protect that
record. Change passwords
regularly.
R If you lose your mobile device,
change the password used to
access this product.
R If you enable the product’s auto
login feature, enable the screen
lock or similar security feature
on your mobile device.
R Take care when performing
important security related
operations, such as deleting
unit IDs.
R To prevent disclosure of
personal information, enable
the screen lock or similar
security feature on your mobile
device. R
When submitting the product for
re pair, make a note of any
important information stored in
the product, as this information
may be erased or changed as
part of the repair process.
R Before handing the product
over to a third party for repair or
other purposes, perform a
factory data reset to erase any
data stored in the product and
remove the microSD card. Use
only trusted repair services
authorized by Panasonic.
R Before disposing of the product,
perform a factory data reset to
erase any data stored in the
product. Remove and erase the
microSD card.
R If your mobile device will no
longer be used with the product,
delete your mobile device’s
registration from the product
and delete the corresponding
app from your mobile device.
R If this product experiences a
power outage, its date and time
setting may become incorrect.
Confirm the date and time
setting and correct it if
necessary.
Additionally, note the following.
R Communications may be
interrupted depending on
10 For assistance, please visit http://shop.panasonic.com/support Important Information
HNC800_(en_en)_0902_ver.220.pdf   102016/09/05   17:54:30