Home
>
Panasonic
>
Television
>
Panasonic High Definition Plasma Display Th 103vx200 Operating Instructions
Panasonic High Definition Plasma Display Th 103vx200 Operating Instructions
Here you can view all the pages of manual Panasonic High Definition Plasma Display Th 103vx200 Operating Instructions . The Panasonic manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41
Picture Profi les
You can lock saved pro fi les to restrict operations when the pro fi les are loaded. You can also set passwords.
Notes:
• When the lock is set in “EXTENDED LIFE SETTINGS”, pro fi le cannot be locked.
• If pro fi le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are \
restricted. (see page 52)
Once a pro fi le is locked, the following operations are restricted when the pro fi le is loaded.
Setting Editing the Pro fi le
(MEMORY EDIT)Editing Picture Adjustment Values via the...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-40.png "Page 41
41
Picture Profi les
You can lock saved pro fi les to restrict operations when the pro fi les are loaded. You can also set passwords.
Notes:
• When the lock is set in “EXTENDED LIFE SETTINGS”, pro fi le cannot be locked.
• If pro fi le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are \
restricted. (see page 52)
Once a pro fi le is locked, the following operations are restricted when the pro fi le is loaded.
Setting Editing the Pro fi le
(MEMORY EDIT)Editing Picture Adjustment Values via the...")
41 Picture Profi les You can lock saved pro fi les to restrict operations when the pro fi les are loaded. You can also set passwords. Notes: • When the lock is set in “EXTENDED LIFE SETTINGS”, pro fi le cannot be locked. • If pro fi le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are \ restricted. (see page 52) Once a pro fi le is locked, the following operations are restricted when the pro fi le is loaded. Setting Editing the Pro fi le (MEMORY EDIT)Editing Picture Adjustment Values via the...
Page 42
![Page 42
42
Picture Profi les
Switches to “PICTURE MENU” mode display.
1Follow steps 1–5 in the previous procedure,
.
2Select “isf Mode”.
Lock1
Change password
MEMORY1
Off Off
MEMORY2
MEMORY12
Off
isf Mode2 adjust
1 select
3Specify “On” or “Off”.
4Exit the menu.
Specifying “On” for isf Mode changes the “PICTURE MENU” mode\
display as follows.
“PICTURE MENU” mode display
STANDARD
PICTURE MENU
250
5
PICTURE
NORMAL IZE
BRIGHTNESS 6
COLOR
0
TINT
SHARPNESS
isf Mode: Off isf...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-41.png "Page 42
42
Picture Profi les
Switches to “PICTURE MENU” mode display.
1Follow steps 1–5 in the previous procedure,
.
2Select “isf Mode”.
Lock1
Change password
MEMORY1
Off Off
MEMORY2
MEMORY12
Off
isf Mode2 adjust
1 select
3Specify “On” or “Off”.
4Exit the menu.
Specifying “On” for isf Mode changes the “PICTURE MENU” mode\
display as follows.
“PICTURE MENU” mode display
STANDARD
PICTURE MENU
250
5
PICTURE
NORMAL IZE
BRIGHTNESS 6
COLOR
0
TINT
SHARPNESS
isf Mode: Off isf...")
42
Picture Profi les
Switches to “PICTURE MENU” mode display.
1Follow steps 1–5 in the previous procedure,
.
2Select “isf Mode”.
Lock1
Change password
MEMORY1
Off Off
MEMORY2
MEMORY12
Off
isf Mode2 adjust
1 select
3Specify “On” or “Off”.
4Exit the menu.
Specifying “On” for isf Mode changes the “PICTURE MENU” mode\
display as follows.
“PICTURE MENU” mode display
STANDARD
PICTURE MENU
250
5
PICTURE
NORMAL IZE
BRIGHTNESS 6
COLOR
0
TINT
SHARPNESS
isf Mode: Off isf...
Page 43
![Page 43
43
SOUND Adjustment
1Display the menu screen.
2Select “SOUND”.
SET UP
POS. /SIZE
SOUND PICTURE
2 access
1 select
3Select the item and set.
2 adjust
1 select
BALANCE
0
1
NORMALIZE
VOLUME
4Exit the menu.
While the “SOUND” menu is displayed, if the OK button is pressed d\
uring “NORMALIZE”, then all adjustment values
are returned to the factory settings.
Helpful Hint (NORMALIZE Normalization)
Item Details
BALANCE Adjusts left and right volumes.
VOLUME Adjust the sound volume level.
Item...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-42.png "Page 43
43
SOUND Adjustment
1Display the menu screen.
2Select “SOUND”.
SET UP
POS. /SIZE
SOUND PICTURE
2 access
1 select
3Select the item and set.
2 adjust
1 select
BALANCE
0
1
NORMALIZE
VOLUME
4Exit the menu.
While the “SOUND” menu is displayed, if the OK button is pressed d\
uring “NORMALIZE”, then all adjustment values
are returned to the factory settings.
Helpful Hint (NORMALIZE Normalization)
Item Details
BALANCE Adjusts left and right volumes.
VOLUME Adjust the sound volume level.
Item...")
43
SOUND Adjustment
1Display the menu screen.
2Select “SOUND”.
SET UP
POS. /SIZE
SOUND PICTURE
2 access
1 select
3Select the item and set.
2 adjust
1 select
BALANCE
0
1
NORMALIZE
VOLUME
4Exit the menu.
While the “SOUND” menu is displayed, if the OK button is pressed d\
uring “NORMALIZE”, then all adjustment values
are returned to the factory settings.
Helpful Hint (NORMALIZE Normalization)
Item Details
BALANCE Adjusts left and right volumes.
VOLUME Adjust the sound volume level.
Item...
Page 44
44
1Display the menu screen.
2Select “SET UP”.
SET UP
POS. /SIZE
SOUND PICTURE
2 access
1 select
3Select the item and set.
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
2 adjust
1 select
4Exit the menu.
SET UP menu
COMPONENT / RGB IN SELECT
COMPONENT RGB
Select to match the...
Page 45
![Page 45
45
EXTERNAL SCALER MODE
OFF ON
This menu can be used to specify whether the built-in scaler or an exter\
nal scaler is used for scaler functions such as
resizing and picture quality adjustment.
The setting is valid with the following input signals.
1125 (1080) / 24p·25p·30p·50p·60p
OFF: Use the built-in scaler.
ON: Use an external scaler.
Note:
If “ON” is set when other than corresponding signal is input, “\
Input signal must be 1125p(1080p)”message is displayed.
SET UP menu
Using Remote Control...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-44.png "Page 45
45
EXTERNAL SCALER MODE
OFF ON
This menu can be used to specify whether the built-in scaler or an exter\
nal scaler is used for scaler functions such as
resizing and picture quality adjustment.
The setting is valid with the following input signals.
1125 (1080) / 24p·25p·30p·50p·60p
OFF: Use the built-in scaler.
ON: Use an external scaler.
Note:
If “ON” is set when other than corresponding signal is input, “\
Input signal must be 1125p(1080p)”message is displayed.
SET UP menu
Using Remote Control...")
45 EXTERNAL SCALER MODE OFF ON This menu can be used to specify whether the built-in scaler or an exter\ nal scaler is used for scaler functions such as resizing and picture quality adjustment. The setting is valid with the following input signals. 1125 (1080) / 24p·25p·30p·50p·60p OFF: Use the built-in scaler. ON: Use an external scaler. Note: If “ON” is set when other than corresponding signal is input, “\ Input signal must be 1125p(1080p)”message is displayed. SET UP menu Using Remote Control...
Page 46
![Page 46
46
SET UP menu
POWER SAVE
PC POWER MANAGEMENT
AUTO POWER OFF
OSD DESIGN
OSD POSITION
OSD LANGUAGE
OFF ON
When this function is turned ON, luminous level of the Plasma Display is\
suppressed, so power consumption is
reduced.
OFF
ON
Equipment power supply is turned OFF when there is no signal.
When this is set to ON, the power supply of the unit goes Off 10 minutes after the input signals stop.
Select your preferred language. Choose the display position.
Note:
Each time you press
or , the...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-45.png "Page 46
46
SET UP menu
POWER SAVE
PC POWER MANAGEMENT
AUTO POWER OFF
OSD DESIGN
OSD POSITION
OSD LANGUAGE
OFF ON
When this function is turned ON, luminous level of the Plasma Display is\
suppressed, so power consumption is
reduced.
OFF
ON
Equipment power supply is turned OFF when there is no signal.
When this is set to ON, the power supply of the unit goes Off 10 minutes after the input signals stop.
Select your preferred language. Choose the display position.
Note:
Each time you press
or , the...")
46 SET UP menu POWER SAVE PC POWER MANAGEMENT AUTO POWER OFF OSD DESIGN OSD POSITION OSD LANGUAGE OFF ON When this function is turned ON, luminous level of the Plasma Display is\ suppressed, so power consumption is reduced. OFF ON Equipment power supply is turned OFF when there is no signal. When this is set to ON, the power supply of the unit goes Off 10 minutes after the input signals stop. Select your preferred language. Choose the display position. Note: Each time you press or , the...
Page 47
![Page 47
47
SET UP menu
3D SETTINGS
If the 3D images are not displayed correctly or seem unusual, please adj\
ust and setup the 3D settings.
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
ON
3D EYEWEAR
OFF
AUTO
3D INPUT FORMAT
3D SETTINGS
LEFT/RIGHT SWAP
SAFETY PRECAUTIONS
• 3D EYEWEAR
ON OFF
ON: Use of...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-46.png "Page 47
47
SET UP menu
3D SETTINGS
If the 3D images are not displayed correctly or seem unusual, please adj\
ust and setup the 3D settings.
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
ON
3D EYEWEAR
OFF
AUTO
3D INPUT FORMAT
3D SETTINGS
LEFT/RIGHT SWAP
SAFETY PRECAUTIONS
• 3D EYEWEAR
ON OFF
ON: Use of...")
47 SET UP menu 3D SETTINGS If the 3D images are not displayed correctly or seem unusual, please adj\ ust and setup the 3D settings. EXTERNAL SCALER MODE POWER SAVE PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF OSD DESIGN TYPE1 OSD POSITION UPPER LEFT OSD LANGUAGE ENGLISH ( US ) SIGNAL EXTENDED LIFE SETTINGSSCREENSAVER NETWORK SETUP INPUT LABEL COMPONENT/RGB-IN SELECT RGB 3D SETTINGS ON 3D EYEWEAR OFF AUTO 3D INPUT FORMAT 3D SETTINGS LEFT/RIGHT SWAP SAFETY PRECAUTIONS • 3D EYEWEAR ON OFF ON: Use of...
Page 48
![Page 48
AUTO
SYNC
1024 ×768
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA MODE
H-FREQ.V-FREQ.
SIGNAL FORMAT
SIGNAL
[
RGB ]
ON
FRAME CREATION
AUTO
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA MODE
H-FREQ.V-FREQ.
SIGNAL FORMAT
SIGNAL
[
COMPONENT ]
ON
3D Y/C FILTER
AUTO
COLOR SYSTEM
SIGNAL
[
VIDEO ]
SIGNAL [
Digital ]
ON
24p SMOOTH FILM
33.7 kHz
60.0 Hz
1125(1080)/60i
H-FREQ.
V-FREQ. 108.0 MHz
DOT CLOCK-FREQ.
SIGNAL FORMAT
60Hz
3D 24p FILM DISPLAY
AUTO
HDMI RANGE
48
Note:
“SIGNAL” setup menu displays a...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-47.png "Page 48
AUTO
SYNC
1024 ×768
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA MODE
H-FREQ.V-FREQ.
SIGNAL FORMAT
SIGNAL
[
RGB ]
ON
FRAME CREATION
AUTO
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA MODE
H-FREQ.V-FREQ.
SIGNAL FORMAT
SIGNAL
[
COMPONENT ]
ON
3D Y/C FILTER
AUTO
COLOR SYSTEM
SIGNAL
[
VIDEO ]
SIGNAL [
Digital ]
ON
24p SMOOTH FILM
33.7 kHz
60.0 Hz
1125(1080)/60i
H-FREQ.
V-FREQ. 108.0 MHz
DOT CLOCK-FREQ.
SIGNAL FORMAT
60Hz
3D 24p FILM DISPLAY
AUTO
HDMI RANGE
48
Note:
“SIGNAL” setup menu displays a...")
AUTO SYNC 1024 ×768 33.7 kHz 60.0 Hz 1125(1080)/60i XGA MODE H-FREQ.V-FREQ. SIGNAL FORMAT SIGNAL [ RGB ] ON FRAME CREATION AUTO 33.7 kHz 60.0 Hz 1125(1080)/60i XGA MODE H-FREQ.V-FREQ. SIGNAL FORMAT SIGNAL [ COMPONENT ] ON 3D Y/C FILTER AUTO COLOR SYSTEM SIGNAL [ VIDEO ] SIGNAL [ Digital ] ON 24p SMOOTH FILM 33.7 kHz 60.0 Hz 1125(1080)/60i H-FREQ. V-FREQ. 108.0 MHz DOT CLOCK-FREQ. SIGNAL FORMAT 60Hz 3D 24p FILM DISPLAY AUTO HDMI RANGE 48 Note: “SIGNAL” setup menu displays a...
Page 49
![Page 49
49
SET UP menu
• SYNC
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for R\
GB input signal).
AUTO:
The H and V sync or synchronized signal is automatically selected. If bo\
th input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from \
the HD...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-48.png "Page 49
49
SET UP menu
• SYNC
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for R\
GB input signal).
AUTO:
The H and V sync or synchronized signal is automatically selected. If bo\
th input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from \
the HD...")
49 SET UP menu • SYNC This function operates only during input from PC IN terminal. Setting RGB sync signal Confi rm that the input is set to RGB input (this setting is valid only for R\ GB input signal). AUTO: The H and V sync or synchronized signal is automatically selected. If bo\ th input, it is selected the H and V sync. ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector. VBS: Uses a synchronized signal of Composite Sync input, which is input from \ the HD...
Page 50
![Page 50
50
SCREENSAVER
SET UP menu
Do not display a still picture, especially in 4:3 mode, for any length o\
f time.
If the display must remain on, a SCREENSAVER should be used.
SCREENSAVER
NEGATIVE IMAGE
START
FUNCTIONEXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFF OFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
1FUNCTION selection
SCREENSAVER...](http://img.usermanuals.tech/thumb/58/71456/w300_th-103vx200_en_om_d-49.png "Page 50
50
SCREENSAVER
SET UP menu
Do not display a still picture, especially in 4:3 mode, for any length o\
f time.
If the display must remain on, a SCREENSAVER should be used.
SCREENSAVER
NEGATIVE IMAGE
START
FUNCTIONEXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFF OFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
1FUNCTION selection
SCREENSAVER...")
50 SCREENSAVER SET UP menu Do not display a still picture, especially in 4:3 mode, for any length o\ f time. If the display must remain on, a SCREENSAVER should be used. SCREENSAVER NEGATIVE IMAGE START FUNCTIONEXTERNAL SCALER MODE POWER SAVE PC POWER MANAGEMENTAUTO POWER OFF OFF OFF OFF OFF OSD DESIGN TYPE1 OSD POSITION UPPER LEFT OSD LANGUAGE ENGLISH ( US ) SIGNAL EXTENDED LIFE SETTINGSSCREENSAVER NETWORK SETUP INPUT LABEL COMPONENT/RGB-IN SELECT RGB 3D SETTINGS 1FUNCTION selection SCREENSAVER...