Panasonic High Definition Plasma Display Th 103vx200 Operating Instructions

							
41
Picture Profi les
You can lock saved pro fi les to restrict operations when the pro fi les are loaded. You can also set passwords.
Notes:
•  When the lock is set in “EXTENDED LIFE SETTINGS”, pro fi le cannot be locked.
• If pro fi le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are \
restricted. (see page 52)

Once a pro fi le is locked, the following operations are restricted when the pro fi le is loaded.
Setting Editing the Pro fi le
(MEMORY EDIT)Editing Picture Adjustment Values via the 
Menu
(PICTURE menu, ADVANCED SETTINGS)Saving Picture Adjustment Values
(MEMORY SAVE)
Off (unlocked) Allowed Allowed Allowed
Lock1 Prohibited Prohibited (picture adjustment values are 
shown) Allowed
Lock2 Prohibited Prohibited (picture adjustment values are 
hidden) Prohibited
Note:
Make a note of the new password to remember it. 
Locking pro fi les
1
Display the menu screen.
2Select “OPTIONS” and hold  for 3 seconds or 
more. 
SET UP
POS. /SIZE
SOUND
OPTIONS
PICTURE
2  access
   
(3 seconds 
or more
)
1  select
3
Select “Memory lock”. 
On
Onscreen display
Off
All Aspect
Off
Auto Setup
Off
Studio mode
3D settings
Function button assign 1
INT
3D Emitter
Signal
Function button assign 2
On
3D Safety Precautions
Memory lock
2  select
1  select
4Enter a 4-digit password. 
The default password is “0123”. 
5Select “Ok”. 
Ok Cancel
Input password
1  select
2  set
6
Select the pro
fi le and specify the desired lock 
setting. 
Lock1
Change password
MEMORY1
Off Off
MEMORY2
MEMORY12
Off
isf Mode2  adjust
1  select
7Exit the menu.
     
1Follow steps 1–5 in the previous procedure, 
. 
2Select “Change password”. 
Lock1
Change password
MEMORY1
Off Off
MEMORY2
MEMORY12
Off
isf Mode2  access
1  select

3Enter a new 4-digit password. 
4Select “Ok”. 
Input new password
Ok
Cancel
1  select
2  set
5Exit the menu.
      
						

							
42
Picture Profi les

Switches to “PICTURE MENU” mode display. 
1Follow steps 1–5 in the previous procedure, 
. 
2Select “isf Mode”.
Lock1
Change password
MEMORY1
Off Off
MEMORY2
MEMORY12
Off
isf Mode2    adjust
1  select
3Specify “On” or “Off”. 
4Exit the menu.
      
Specifying “On” for isf Mode changes the “PICTURE MENU” mode\
 display as follows. 
“PICTURE MENU” mode display
STANDARD
PICTURE MENU
250
5
PICTURE
NORMAL IZE
BRIGHTNESS 6
COLOR
0
TINT
SHARPNESS
                          
isf Mode: Off isf Mode: On
STANDARD STANDARD
DYNAMIC isf Mode DAY
CINEMA isf Mode NIGHT
MONITOR MONITOR
Mode display when 
 is selected
  
isf Mode: Off isf Mode: On
PICTURE MENU CINEMA
DYNAMIC
STANDARD
MONITORPICTURE MENU
isf Mode NIGHTisf Mode DAYSTANDARD
MONITOR 
						

							
43
SOUND Adjustment
1Display the menu screen.
2Select “SOUND”.
SET UP
POS. /SIZE
SOUND PICTURE
2  access
1  select
3Select the item and set.
2   adjust
1   select
BALANCE
0
1
NORMALIZE
VOLUME
4Exit the menu.    
     
While the “SOUND” menu is displayed, if the OK button is pressed d\
uring “NORMALIZE”, then all adjustment values 
are returned to the factory settings.
Helpful Hint (NORMALIZE   Normalization)
Item Details
BALANCE Adjusts left and right volumes.
VOLUME Adjust the sound volume level.
Item Details
LEFT CHANNEL CHANNEL 1 to CHANNEL 16
Selects left audio channel.
RIGHT CHANNEL CHANNEL 1 to CHANNEL 16
Selects right audio channel.
SOUND OUT ON 
 OFF
ON:   Enables audio output.
OFF:   Disables audio output.
LEVEL METER OFF 
 1-8CH  9-16CH
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 
channels each on both right and left sides of the display.
OFF:   Hides the audio level meter.
1-8CH:   Displays the audio level meter (1-8ch)
9-16CH:  Displays the audio level meter (9-16ch)
SDI SOUND OUTPUT
This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board  
(TY-FB11DHD) is installed to the unit.
Note:
This menu is available only when selecting a 
slot that HD-SDI Terminal Board with audio 
(TY-FB10HD) or Dual Link HD-SDI Terminal 
Board (TY-FB11DHD) is installed.
CHANNEL 1
LEFT CHANNEL SDI SOUND OUTPUT
2
/2
CHANNEL 2
RIGHT CHANNEL
ON
SOUND OUT
OFF
LEVEL METER 
						

							
44
1Display the menu screen.
2Select “SET UP”.
SET UP
POS. /SIZE
SOUND PICTURE
2  access
1  select
3Select the item and set.
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH  (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
2  adjust
1   select
4Exit the menu.   
     
SET UP menu
COMPONENT / RGB IN SELECT
COMPONENT  RGB
Select to match the signals from the source connected to the Component /\
 RGB or PC input terminals.
Y,  P
B, PR signals  “COMPONENT”
RGB signals 
 “RGB”
Note:
Make setting of the selected input terminal (COMPONENT RGB IN or PC IN).
YUV / RGB IN SELECT
YUV  RGB
Select to match the signals from the source connected to the DVI input t\
erminals.
YUV signals 
  “YUV”
RGB signals 
  “RGB”
Notes:
•  Selection may not be possible, depending on which optional board is inst\
alled.
•  Make setting of the selected input terminal (SLOT). 
						

							
45
EXTERNAL SCALER MODE
OFF  ON
This menu can be used to specify whether the built-in scaler or an exter\
nal scaler is used for scaler functions such as 
resizing and picture quality adjustment. 
The setting is valid with the following input signals. 
1125 (1080) / 24p·25p·30p·50p·60p
OFF:  Use the built-in scaler.
ON:  Use an external scaler.
Note:
If “ON” is set when other than corresponding signal is input, “\
Input signal must be 1125p(1080p)”message is displayed.
SET UP menu
Using Remote Control
Each time you press 
, an external scaler is activated or deactivated. 
 
 
 
 
 
  
ONEXTERNAL SCALER MODE
Note:
Selecting “ON” in this setting deactivates the following settings \
and disables these operations. 
POS. /SIZE menu:           H-SIZE, V-SIZE, 1:1 PIXEL MODE, DISPLAY SIZE (see page 29, 30)
PICTURE menu:             BRIGHTNESS, COLOR, TINT, SHARPNESS, MEMORY SAVE, MEMORY LOAD 
(see page 32, 38, 39)
ADVANCED SETTINGS:       3:2 PULLDOWN, NOIZE REDUCTION (see page 34)
SIGNAL menu:            XGA MODE (see page 48)
OPTIONS menu: All Aspect (see page 56)
ASPECT Controls 
(see page 22)
“EXT. SCALER” is displayed in the menu screen to indicate that an externa\
l scaler is in use. 
STANDARD EXT.SCALER
PICTURE MENU 25
PICTURE NORMAL IZE
BRIGHTNESS
COLOR
TINT 
						

							
46
SET UP menu
POWER SAVE
PC POWER MANAGEMENT
AUTO POWER OFF
OSD DESIGN
OSD POSITION
OSD LANGUAGE
OFF  ON
When this function is turned ON, luminous level of the Plasma Display is\
 suppressed, so power consumption is 
reduced.
OFF 
 ON
Equipment power supply is turned OFF when there is no signal.
When this is set to ON, the power supply of the unit goes Off 10 minutes after the input signals stop. 
Select your preferred language. Choose the display position.
Note:
Each time you press 
 or , the on-screen menu display position changes.
Display example
UPPER LEFT
Choose the background color (transparency).
TYPE1
TYPE2 TYPE3
OFF  ON
When this function is set to ON, it operates under the following conditi\
ons to turn the power on or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so second\
s during PC signal input:
     → Power is turned off (standby); the power indicator lights up orange.
When pictures (HD/VD sync signals) are subsequently detected:
     → Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during PC signal input.
•   This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT” is set to “RGB”.
CENTER
  Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
 (Chinese)
 (Japanese)
Русский  (Russian) 
						

							
47
SET UP menu
3D SETTINGS
If the 3D images are not displayed correctly or seem unusual, please adj\
ust and setup the 3D settings.
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH  (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
ON
3D EYEWEAR
OFF
AUTO
3D INPUT FORMAT
3D SETTINGS
LEFT/RIGHT SWAP
SAFETY PRECAUTIONS
• 3D EYEWEAR
ON  OFF
ON:  Use of 3D Eyewear. You can see 3D images for 3D image signal and 2D images for 2D image sign\
al.
OFF:  No use of 3D Eyewear. You can see 2D images instead of 3D images.
When set to “ON”, “3D” is displayed during 3D images.
PC
FULLNANODRIFT3D
• 3D INPUT FORMAT
3D images method is set. 
AUTO:  3D images are automatically displayed according to the signal.
SIDE BY SIDE/TOP AND BOTTOM:  One of the formats of the 3D standard. Select these formats as necessar\
y.
NATIVE:  Displays the input signal as it is. Use to identify the format type of \
the input signal.
• LEFT/RIGHT SWAP
OFF  ON
This function calibrates the timing to switch the right and left images \
as well as the timing to switch the shutter of right 
and left 3D Eyewear.
Selects “ON” if you feel that the sense of depth is unusual.
• SAFETY PRECAUTIONS
Displays the precautions for viewing 3D images.  
2  access
1  select
Select the item and set.
2  change
1   
select 
						

							
AUTO
SYNC
1024 ×768
33.7    kHz
60.0    Hz
1125(1080)/60i
XGA MODE
H-FREQ.V-FREQ.
SIGNAL FORMAT
SIGNAL
[
 RGB  ]
ON
FRAME CREATION
AUTO
33.7    kHz
60.0    Hz
1125(1080)/60i
XGA MODE
H-FREQ.V-FREQ.
SIGNAL FORMAT
SIGNAL
[
 COMPONENT  ]
ON
3D Y/C FILTER
AUTO
COLOR SYSTEM
SIGNAL
[
 VIDEO  ]
SIGNAL [
 Digital  ]
ON
24p SMOOTH FILM
33.7    kHz
60.0    Hz
1125(1080)/60i
H-FREQ.
V-FREQ. 108.0  MHz
DOT CLOCK-FREQ.
SIGNAL FORMAT
60Hz
3D 24p FILM DISPLAY
AUTO
HDMI RANGE
48
Note: 
“SIGNAL” setup menu displays a different setting condition for each input signal.
SIGNAL menu
For VIDEO (S VIDEO) For RGB
For COMPONENT For Digital
(Example: HDMI input)
SET UP menu
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFF OFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH  (
US )
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
SIGNAL
Input signal display
Displays the frequency and the type of the 
current input signal.
This display is valid only for 
COMPONENT/RGB/PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.  
2  access
1  select
Select the item and set.2  change
1   
select
• 3D Y/C FILTER
This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.
ON 
 OFF
Note:
When ON, this setting only affects NTSC input signals.
• COLOR SYSTEM
This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.
  AUTO SECAM M.NTSC
NTSC
PA L
Set the color system to match the input signal. When “AUTO” is set, COLOR SYSTEM will be automatically selected 
from NTSC/PAL/SECAM/M.NTSC.
To display PAL60 signal, select “AUTO” or “PAL”.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may\
 in rare cases become 
unstable. Should this occur, set the system to match the format of the input signal.
• XGA MODE
This menu is displayed when the input signal is analog (Component/PC).\
This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling 
rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 \
@ 60Hz).
AUTO 
 1024×768  1280×768  1366×768
AUTO:  Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends o\
n the angle of view or display resolution 
condition.
Note:
After making this setting, be sure to make each adjustment (such as “\
AUTO SETUP”) on the “POS. /SIZE” menu as 
necessary. (see page 28) 
						

							
49
SET UP menu
• SYNC
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for R\
GB input signal).
AUTO: 
The H and V sync or synchronized signal is automatically selected. If bo\
th input, it is selected the H and V sync.
ON G:  Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS:  Uses a synchronized signal of Composite Sync input, which is input from \
the HD connector.
Setting Component sync signal
Con fi rm that the input is set to Component input (this setting is valid only\
 for Component input signal).
AUTO: 
The H and V sync or synchronized signal is automatically selected. If bo\
th input, it is selected the H and V sync.
ON Y:  Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with “SYNC ON\
 G”.
• SDI THROUGH
Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
OFF 
 ON
ON:  Enables active through.
OFF:  Disables active through.
Note:
Settings can only be performed for this menu when a slot mounted with a \
Dual Link HD-SDI Terminal Board (TY-FB11DHD) 
is selected.
• FRAME CREATION
Displays reducing screen  fl icker image for 50Hz/25Hz signal input. 
OFF  ON
Note:
This function activates only for 50Hz/25Hz signal input with 2D images.
• 24p SMOOTH FILM
During 2D or 3D viewing, images captured at 24 frames per second are pro\
vided in a smooth manner. OFF   
ON
Note: This function can be set only for 24p signal input with 2D or 3D images.\
• 3D 24p FILM DISPLAY
For 3D images, images captured at 24 frames per second are set.
60Hz 
 48Hz
60Hz:
 Increases the number of frames to reproduce more natural movement images\
.
48Hz:  Reproduces images close to  fi lm-speci fi c texture.
Note:
This function can be set only for 24p signal input with 3D images.
• HDMI RANGE
Switches the dynamic range according to the input signal from HDMI 1 to \
4 terminals.
VIDEO(16-235) 
 FULL(0-255)  AUTO
VIDEO(16-235):  If the input signal is the video range,  Example: HDMI terminal output \
for DVD player
FULL(0-255):  If the input signal is full range,  Example: HDMI terminal output for p\
ersonal computer
AUTO:  
Switches the dynamic range automatically between “VIDEO(16-235)”\
 and “FULL(0-255)” according to the input signal.
Note:
This function can be set only for HDMI 1 to 4 terminal input. 
						

							
50
SCREENSAVER
SET UP menu
Do not display a still picture, especially in 4:3 mode, for any length o\
f time.
If the display must remain on, a SCREENSAVER should be used.
SCREENSAVER
NEGATIVE IMAGE
START
FUNCTIONEXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFF OFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH  (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
 
1FUNCTION selection
SCREENSAVER
NEGATIVE IMAGE
START
FUNCTION2    change
1   select
SCROLLING BAR ONLY
OVERLAY SCROLLING BAR
NEGATIVE IMAGE
WHITE SCREEN
NEGATIVE IMAGE :  A negative image will be displayed on the screen.
SCROLLING BAR ONLY :  A white bar will scroll from left to right. The 
image wont be displayed.
OVERLAY SCROLLING BAR :  The brightness of the image will be 
decreased and a white bar will scroll on it.
WHITE SCREEN :  The whole screen will be white.
2START setting
2  set
1  select
The menu screen will disappear and the SCREENSAVER will be activated.
To stop the SCREENSAVER under ON, press any button.
Note:  When the display is turned off, the SCREENSAVER will be 
deactivated.
Select “START”.
SCREENSAVER
NEGATIVE IMAGE
START
FUNCTION
2  access
1  select