Panasonic High Definition Plasma Display Th 103vx200 Operating Instructions

51
SET UP menu
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH  (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
EXPRESS SETTINGSCUSTOM SETTINGSRESET
EXTENDED LIFE SETTINGS
30
OFF
UNLOCK BRIGHT
DYNAMIC
MID
PICTURE PICTURE MENU
EXTENDED LIFE SETTINGS
RECOMMENDED SETTINGS
SIDE BAR ADJUST
NANODRIFT SAVER
PEAK LIMIT
LOCK SETTINGS
APPLY TO CURRENT...

52
EXPRESS SETTINGS
Set the “Image Retention Reduction” menu to the recommended settin\
gs.
All menus will be locked.
   PICTURE MENU: STANDARD
      PICTURE: Recommended setting for each model
   SIDE BAR ADJUST: BRIGHT
   NANODRIFT SAVER: MID
   PEAK LIMIT: ON
1Select “EXPRESS SETTINGS”.
EXPRESS SETTINGSCUSTOM SETTINGSRESET
EXTENDED LIFE SETTINGS1 select
2 access
2Select the input to apply the settings.
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS
EXTENDED LIFE SETTINGS
1 select
2 set
3Select “YES”.
YES...

53
SET UP menu
CUSTOM SETTINGS
Set the individual “Image Retention Reduction” menu.
1Select “CUSTOM SETTINGS”.
CUSTOM SETTINGSRESET
EXTENDED LIFE SETTINGSEXPRESS SETTINGS2  access
1  select
2To set each menu to the recommended setting:
Select “RECOMMENDED SETTINGS”.
30OFF
UNLOCK BRIGHT
DYNAMIC
MID
PICTURE PICTURE MENU
EXTENDED LIFE SETTINGS
RECOMMENDED SETTINGS
SIDE BAR ADJUST
NANODRIFT SAVER
PEAK LIMIT
LOCK SETTINGS
APPLY TO CURRENT INPUTAPPLY TO ALL INPUTS
2  set
1  select
Each menu will be set as...

54
SET UP menu
This function can change the label of the Input signal to be displayed. \
(see page 19)
Customizing the Input labels
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH  (
US )
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUP INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
HDMI1
HDMI1
INPUT LABELHDMI2
HDMI2HDMI3
HDMI3HDMI4
HDMI4SLOT INPUT
SLOT INPUTCOMPONENT
COMPONENTPC
PC
 
Note:
The...

SIGNAL
EXTENDED LIFE SETTINGS
SCREENSAVERINPUT LABEL
COMPONENT/RGB-IN SELECT RGB
3D SETTINGS
NETWORK SETUP
192.168.  0.  8
1024
255.255.255.
  0
192.168.
  0.  1
IP ADDRESS DHCP
NETWORK SETUP
SAVE
SUBNET MASK
GATEWAY
PORT AUTO
LAN SPEED
0
NETWORK ID
RS-232C
CONTROL I/F SELECT
--:--:--:--:--:--
MAC ADDRESS OFF
Network Setup
Make the various settings to use the network function.
  
DHCP, IP ADDRESS, SUBNET MASK, and GATEWAY settings
1 Set DHCP.
     
When “OFF” is selected, IP ADDRESS and other settings...

Item Adjustments
Onscreen displayOn:
  Displays all the following on screen.
•  Power on display
•  Input signal switch display
•  No signal display
•  Remainig time of off-timer after 
 was pressed.
Off:   Hides all the items above from view.
All Aspect Sets All Aspect mode (advanced aspect setting) or default aspect mode.
With each press of 
 button, the aspect changes in the selected mode.
Off:   Default aspect mode
On:  All Aspect mode
Aspect mode of each setting is as follows:
(Example: HD signal)...

OPTIONS Adjustments
Item Adjustments
3D EmitterSet the infrared transmitter for the 3D Eyewear.
INT:
 Use the infrared transmitter of the unit.
EXT:  Use the external 3D IR TRANSMITTER (available separately.) 
Function button assign 1
Function button assign 2 Set the function to operate when the FUNCTION button 1 to 2 on the remot\
e control is pressed.
3D settings:
 The “3D SETTINGS” menu is displayed.
Scrolling bar:  
The screen saver activates, and after 15 minutes, the display power shut\
s down...

Using Network Function
This unit has a network function to control the network connected displa\
y with your computer.
Note:
To use the network function, set each “NETWORK SETUP” setting and m\
ake sure to set the “CONTROL I/F SELECT” 
to “LAN”. (see page 55)
When “LAN” is set, power is supplied to LAN circuit, and power ind\
icator is lit orange under the condition of power off 
with remote control (stand-by state).
Example of Network Connection
Command Control
Network function of the unit can control...

Using Network Function
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and yo\
u can operate the following actions from your 
computer using PJLink™ protocol. 
• Display setup
•  Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the t\
able below.
PJLink™ security authentication
Set “Panasonic” for the PJLink™ password.
•  PJLink™ is a pending trademark in Japan, the United States, and other\
 countries or areas....

Unit Setup
Set each “NETWORK SETUP” setting and make sure to set the “CONT\
ROL I/F SELECT” to “LAN”. (see page 55)
Computer Setup
Disable the proxy server settings and enable JavaScript. 
You can use a Web browser to control the unit and set up a network and password.
Access to the TOP screen of the Web browser control using a Web browser. To use the Web browser control, the unit and computer setups are required.
(Windows) (Macintosh)
Disable proxy server settings
1  Display [Internet Properties]...