Panasonic Hdtv Monitor Ct 36hl44 Operating Instructions

							HDTV Monitor
Operating Instructions
Monitor de Alta Definición
Instrucciones de Operación
Écran à haute définition
Manuel d’utilisation
TQB2AA0500 40405
PRINTED IN USA
IMPRESO EN EE.UU
IMPRIMÉ AUX ÉTATS-UNIS
CT-32HL44
CT-36HL44 
						

							ENGLISH
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.The exclamation point within a triangle
is intended to tell the user that
important operating and servicing
instructions are in the papers with the
appliance.The lightning flash with arrow head
within a triangle is intended to tell the
user that parts inside the product
constitute a risk of electric shock to
persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WA R N I N G: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE.  DO NOT PLACE ANY OBJECTS FILLED 
WITH LIQUIDS, SUCH AS, VASES ON THIS APPARATUS.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet. 
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
The Class II insulation symbol (square within a square) indicates that this product has been evaluated 
and tested to comply with Class II insulation requirements. 
						

							IMPORTANT INFORMATION
1 z
ENGLISH
Important Information
Important Information Regarding The Use of Video Games, Computers, Or Other Fixed Image Displays
FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS TV RECEIVER NOT EXPRESSLY APPROVED BY
MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE HARMFUL
INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.
FCC INFORMATION
This equipment has been tested and found to comply with the limit for a Class B Digital Device in
accordance with the specifications in Part 15 of the FCC Rules. The limits are designed to provide
reasonable protection against radio and television interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception, which you can determine by
turning the equipment off and on, try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS MAY
BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION PLEASE
CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS INDUSTRIES
ALLIANCE:  ENVIRONMENTAL NOTICE:
The Energy Star label, a symbol for energy efficiency, was created by the U.S. 
Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) to 
help customers identify products that can save them money and protect the 
environment by saving energy. Energy Star compliant products generally consume less 
energy than similar standard products.
HDMI, the HDMI logo and High Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
BBE High Definition Sound restores clarity and presence for better speech intelligibility 
and music realism.
High Definition Sound
WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is not an
operating defect and as such is not covered by Warranty. 
The television is designed to display constantly moving images on the screen. Continuous viewing of stationary
images such as letterbox pictures on standard screen TVs (with top/bottom bars), non-expanded standard (4:3)
pictures on wide screen TVs (with side bars shown on each side of an image), stock market report bars (ticker
running at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (Internet)
or repetitive computer style patterns should be limited.
The extended use of fixed image program material can cause permanent picture tube damage, shown as a
“shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be limited by
performing the following steps:
• Limit the display of fixed image program material to no more than 15% of total viewing time per week.
• Turn the power off when not in use. 
						

							2 z
TABLE OF CONTENTS
ENGLISH
Table of Contents
Important Information ..................................... 1
Congratulations ............................................... 3
Customer Record........................................................    3
Care and Cleaning ......................................................    3
Specifications..............................................................    3
Feature Chart..............................................................    3
Installation ........................................................ 4
Television Location .....................................................    4
Optional Cable Connections .......................................    4
AC Power Supply Cord ...............................................    4
Cable / Antenna Connection .......................................    4
Remote Control Battery Installation ............................    4
Initial Set Up Menu........................................... 5
Optional Equipment Connections .................. 6
VCR ............................................................................    6
Cable Box ...................................................................    6
VCR and Cable Box....................................................    6
Amplifier (TO AUDIO AMP) ........................................    7
Program Out connection .............................................    7
Digital TV - Set-Top Box (DTV-STB) or DVD Players    7
Front Control Panel.....................................................    7
HDMI (High Definition Multimedia Interface) input 
connection ...............................................................    8
Special Features .............................................. 9
Special Remote Butttons ............................................    9
Split Operation  ...........................................................    9
Split Operation With a Cable Box  ..............................    9
Split Operational Buttons ............................. 10
SPLIT CTRL Button ....................................................  10
TV/Video Button..........................................................  10
Search Button .............................................................  10
Freeze Button .............................................................  10
Main Picture Freeze Feature ......................................  10
Remote Control Operation ...........................  11
Operating Components with Remote Control.............  12
Programming the Remote ..........................................  14
Programming without a Code .....................................  14
Component Codes .....................................................  14
Basic Menu Navigation.................................  17
Icon Menus Operation ..................................  18
Picture ........................................................................  18
Audio ..........................................................................  18
Channels ....................................................................  19
Timer ..........................................................................  20
Lock ............................................................................  20
V-CHIP Set ..............................................................  21
Set Up ........................................................................  23
Troubleshooting Chart .................................  25
Index...............................................................  26
Note:The warranty and service center information is located in the back of this manual.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2004 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.  
						

							CONGRATULATIONS
3 z
ENGLISH
Congratulations
Your new Panasonic Tau television features state-of-the-art
technology for high quality picture and sound with complete
audio/video connections for your home theater system.
Your TV is designed to give you many years of enjoyment.
It was thoroughly tested and tuned at the factory for best
performance.
Customer Record
The model and serial number of this product are located on
the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at: www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
• Use a mild soap solution or window cleaner with a soft
clean cloth. DO NOT USE ABRASIVE CLEANERS.
• Avoid excessive moisture and wipe dry.
Warning: Do not spray any type of cleaning fluid directly on the
screen.
Cabinet and Remote Control
• For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.
• Do not use benzene, thinner or other petroleum based
products. 
Specifications
Specifications are subject to change without notice or
obligation.   
Feature Chart 
Power Source
CT-32HL44 (3.6A)
CT-32HL44U (3.6A)
CT-36HL44 (3.6A)
CT-36HL44U (3.6A)
120V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks500mV RMS 47K Ohm
 Video out jack1Vp-p, 75 Ohm, Phono Jack Type
 Audio Output Jacks0-2.0V RMS 4.7K Ohm
HDMI/HDCP Input jackTy p e  A
Component Input (Y / PB / PR)75 Ohm, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector
MODELS
CT-32HL44
CT-36HL44
FEATURES
MENU LANGUAGE 
ENG/SPAN/FR•  •  
2 TUNER SPLIT•  •  
75 OHM INPUT•  •  
CLOSED CAPTIONING•  •  
V-CHIP CAPABILITY •  •  
DIGITAL SCAN RATE 1080i, 
480p1080i, 
480p
NTSC LINE-DOUBLER  480p 480p
VIDEO NORM•  •  
AUDIO NORM•  •  
STEREO•  •  
AI SOUND•  •  
BASS/BALANCE/TREBLE•  •  
SURROUND•  •  
BBE•  •  
A/V IN (REAR/FRONT)4
 (3/1)  4
 (3/1)
AUDIO OUT•  •  
HDMI/HDCP INPUT•  •  
S-VHS INPUT •  •  
COMPONENT INPUTS•  •   
						

							4 z
INSTALLATION
ENGLISH
Installation
Television Location
This unit is intended to be used with an optional stand or
entertainment center. Consult your dealer for available
options.
• Avoid excessive sunlight or bright lights, including
reflections.
• Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
• Fluorescent lighting may reduce remote control
transmitting range.
• Keep away from magnetic equipment, including motors,
fans and external speakers.
WARNING: Use this television receiver only with the
cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. In order to
avoid injury to children, never place your television receiver on a
piece of furniture that is capable of being tilted by a child leaning
on it, pulling on it, standing on it, or climbing on it. A falling
television can cause serious injury or even death.  
Optional Cable Connections
Shielded audio and video cables should be used between
components. For best results:
• Use 75-ohm coaxial shielded cables.
• Use appropriate input and output connectors that match
your component connectors.
• Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection
is required.
Cable Connection
Connect the cable supplied by your local
cable company to ANT connection on back
of television. Tighten with fingers only. Use
of any tool (e.g. pliers) for tightening may
result in tuner damage. Select cable mode
in the SET UP menu (refer to page 24).Note:A cable converter box may be required for proper
reception. Check with your local cable company for
compatibility requirements.
Antenna Connection
• For proper reception of VHF/UHF channels, an
external antenna is required. For best reception an
outdoor antenna is recommended.
• Connect home antenna to
ANT connection on back of
television. Select TV mode
in the SET UP menu. (refer
to page 24) 
  
Note:Cable Mode is preset at the
factory. Antenna users must
change to TV Mode in the Set Up menu.
Remote Control Battery Installation
Requires two AA batteries (supplied).    
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the cover
and sliding it off in the direction indicated.
2. Install batteries matching (+) and (-) polarity signs.
3. Replace the battery cover by sliding in reverse until the
lock snaps.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control.
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon with alkaline).
• Do not recharge, heat, short-circuit, disassemble, or
burn batteries.
Polarized plug
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
AA / 1.5A
AA / 1.5A
Battery Polarity
12
AA / 1.5A
AA / 1.5A
3 
						

							INITIAL SET UP MENU
5 z
ENGLISH
Initial Set Up Menu
For your convenience, the Initial Set up menu will be
displayed on screen when the set is turned on for the first
time. If needed, follow the menus and procedures for
setting up the features.
IDIOMA/LANGUE
To change menu language to ENGLISH, SPANISH or
FRENCH.
Procedure
• Press VOL X to select English, Spanish or French.  
MODE
To select TV (antenna) or CABLE mode depending on the
signal source. 
Procedure
• Press VOL X to select TV or CABLE.   
AUTO PROGRAM
To automatically program all channels with a signal.
Procedure
• Press VOL X to start Auto Programming. 
GEOMAGNETIC CORRECTION
This feature is used to adjust discoloration of the picture
due to the earth’s magnetic field in the area.
Procedure
• Press VOL X to display adjustment menu.
• Press WVOL or VOL X to adjust discoloration in
picture.  
TILT CORRECTION
This feature is used to adjust the tilt of the picture due to
earth’s magnetic field in the area. 
Procedure
• Press VOL X to display adjustment menu.
• Press WVOL or VOL X to adjust picture tilt.
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
GEOMAGNETIC CORRECTION
TILT CORRECTIONENGLISH X
CABLE X
   X
X
X
PRESS ACTION TO  EXIT
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
GEOMAGNETIC CORRECTION
TILT CORRECTIONENGLISH X
CABLE X
   X
X
X
PRESS ACTION TO  EXIT
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
GEOMAGNETIC CORRECTION
TILT CORRECTIONENGLISH X
CABLE X
   X
X
X
PRESS ACTION TO  EXIT
GEOMAGNETIC CORRECTION
- - - - - - - - -  - - - - - - - - -
0
TO ADJUST
PRESS ACTION TO EXITl
FIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
GEOMAGNETIC CORRECTION
TILT CORRECTIONENGLISH X
CABLE X
   X
X
X
PRESS ACTION TO  EXIT
            TILT CORRECTION
0
TO ADJUST
   PRESS      ACTION 
           TO      EXITFIRST PLEASE
CONNECT THE ANTENNA
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
GEOMAGNETIC CORRECTION
TILT CORRECTIONENGLISH X
CABLE X
   X
X
X
PRESS ACTION TO  EXIT 
						

							6 z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
Optional Equipment Connections
Note:The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection 
Follow this diagram when connecting your television to a
VCR only.  
Viewing a television program
Procedure
• Tune the television to the program you want to view.
Viewing a video
Procedure
ˆOption A
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Begin the video.
ˆOption B
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Begin the video.
Recording a television program
Procedure
ˆOption A (Recording and viewing the same program)
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
ˆOption B (Recording one program while viewing another
program)
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
• Press the TV/VIDEO button on the remote control to
switch back to TV mode.
• Tune the television to the program you want to view. 
Cable Box Connection
Follow this diagram when connecting your television to a
cable box only.  
Viewing a premium (scrambled) cable channel
Procedure
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
VCR and Cable Box Connection
Follow this diagram when connecting your television to
both a VCR and a cable box. 
Viewing a premium (scrambled) cable channel
Procedure
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
CABLES NOT INCLUDED TERMINALS ON BACK OF TELEVISION
ANT  INANT  OUT
AV IN
AV OUT
VIDEO
AUDIO L
RL
R
PLAY
STOP R
E
WFFVCR 
Incoming 
Cable
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO PROG
OUT VIDEO
INPUT Y
P
B
PR



L
R
123
12
L
RTO AUDIO 
AMP
AUDIO
IN ANT 
HDMIAV INANT IN ANT  OUT
15CABLE BOX
Incoming
Cable
TERMINALS ON BACK OF TELEVISION
CABLES NOT INCLUDED
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO PROG
OUT VIDEO
INPUT Y
P
B
PR



L
R
123
12
L
RTO AUDIO 
AMP
AUDIO
IN ANT 
HDMIAV IN
ANT OUT ANT  IN
15
CABLES NOT INCLUDED
ANT  IN ANT  OUT
VIDEO OUT
AUDIO OUT L
R
PLAY
STOP R
E
WFFVCR
TERMINALS ON BACK OF TELEVISION
Incoming
CableCABLE BOX
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO PROG
OUT VIDEO
INPUT Y
P
B
PR



L
R
123
12
L
RTO AUDIO 
AMP
AUDIO
IN ANT 
HDMIAV IN 
						

							OPTIONAL EQUIPMENT CONNECTIONS
7 z
ENGLISH
VCR and Cable Box Connection (Cont.)
Recording a premium (scrambled) cable channel
Procedure
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Turn the VCR ON.
• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.
• Using your cable box, tune to the premium cable channel
you want to record.
• Begin recording.
ˆTo view a different channel while recording:
• Press the TV/VIDEO button on the remote control to
select TV mode.
• Tune the television to a program (except another
premium cable channel).
Amplifier Connection (TO AUDIO AMP)         
To listen the audio through a separate stereo system,
connect an external audio amplifier to TO AUDIO AMP
outputs on back of television.
Note:TO AUDIO AMP terminals cannot be connected directly
to external speakers. 
Audio Adjustments
• Select SPEAKERS ON located in the onscreen AUDIO
menu. 
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu. 
• Volume, mute, bass, treble and balance are now
controlled through the television. 
Note:Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.
Note:If the Main Picture signal is Component Video Input or
HDMI, no Program out signal will be available.  
Procedure
• Connect optional equipment to PROG OUT and TO
AUDIO AMP L/R terminals.
• PROG OUT terminal display is the same as on-screen
display.
• See optional equipment manual for further instructions
for recording and monitoring.
Digital TV - Set-Top Box (DTV-STB) or DVD 
Connection
This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STV must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.  
Use this diagram to connect the DTV-STB (Digital TV Set-Top-
Box) or DVD player to the television.    
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.   
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the video inputs. See the optional equipment manual for
details.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select VIDEO 4 input mode.
• Operate optional equipment as instructed in equipment
manual.
CONNECTIONS ON BACK OF TELEVISION
CABLES NOT SUPPLIED
90.7 MHZ
EXTERNAL AMPLIFIER
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO PROG
OUT VIDEO
INPUT Y
P
B
PR



L
R
123
12
L
RTO AUDIO 
AMP
AUDIO
IN ANT 
HDMIAV IN
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO PROG
OUT VIDEO
INPUT Y
P
B
PR



L
R
123
12
L
RTO AUDIO 
AMP
AUDIO
IN ANT 
HDMIAV IN
CABLES NOT INCLUDED TERMINALS ON BACK OF TELEVISION
PLAY
STOP R
E
WFFor Monitor
VCR
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO PROG
OUT VIDEO
INPUT Y
P
B
PR



L
R
123
12
L
RTO AUDIO 
AMP
AUDIO
IN ANT 
HDMIAV IN
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
R-AUDIO-L - VIDEO  S-VIDEONTSC OUTPUT
Y
PBPRMAIN
VIDEODIGITAL TV OUTPUT
L-AUDIO-R
TERMINALS ON BACK OF TELEVISION
CABLES NOT INCLUDED
VIDEO 4 L - AUDIO - RS-VIDEO

ACTIONCH 
CH 
  VOLVOL TV/VIDEO POWERBBE
ON /OFF INDICATOR
POWER ON/OFFINFRARED SENSOR
Front Panel
Note:The ON/OFF indicator LED (red) will be lit when set
is on.  
						

							8 z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
Optional Equipment Connections (cont.)
HDMI (High Definition Multimedia Interface) 
input connection
About HDMI
HDMI is the first all digital consumer electronics A/V
interface that supports several uncompressed standards,
enhanced and high definition video formats as well as
existing multi-channel audio format. One jack supports both
video and audio information. The HDMI/HDCP
1 input can
be connected to an EIA/CEA 861
2compliant consumer
electronic device, such as a set top box or DVD player
equipped with an HDMI or DVI output connection. By
inputting a High-bandwidth Digital Content Protection
(HDCP) high definition picture source to the HDMI terminal
of this television, high definition pictures can be displayed
on the screen in their digital form. The HDMI input terminal
is not intended to be used with personal computers. This
television is compatible with 1080i, 480p and 480i formats.
Select the output of the connecting device to match that of
the television.
Notes:
1. HDMI/HDCP = High Definition Multimedia Interface /
High-Bandwidth Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
Compatible formatsConnection diagram
Follow the diagram below to connect the television to a set top
box or a DVD player. 
Procedure
• Connect the HDMI output from the set top box or a DVD
player to the HDMI input on the back of the television.
• Press TV/VIDEO button on the remote control to select
HDMI input. The interface on the television is an HDMI
Type A connector.
• If the external device has a DVI output only, use a DVI to
HDMI adaptor cable*
3 to connect to the HDMI jack on
the television. Also, connect the Audio Out signal from
the external device (set top box or DVD player) to the
Audio In*
4 jacks below the HDMI input.
• If you cannot display the picture because your Digital Set
Top Box does not have a Digital Out terminal setting, use
the Component Video Input (or the S-Video Input or
Video Input). In this case, the picture will be displayed as
an analog signal.
Note:
*3. HDMI-DVI conversion cable (TY-SCH03DH) available
on Panasonic Website: www.panasonic.com.
*4. Please refer to page 19 for Audio setting detail. This television is compatible with the following formats. 
Please set the connecting device to the following format.
Video signal   
Audio signal
When digital audio is included in the HDMI connection, 
the compatible sampling frequencies are 48 KHz / 
44.1KHz / 32 KHz.
FormatNo. of dotsVertical scanning 
frequency (Hz)
1080i 1920 x 1080i 59.94 / 60
540p (480p)720 x 480p
640 x 480p59.94 / 60
59.94 / 60
540p (480i) 720 x 480i 59.94 / 60
TERMINALS ON BACK OF TELEVISION
Incoming
Cable
EXTERNAL DIGITAL
    COMPONENT
HDMI 
OUTCABLES NOT INCLUDED
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO PROG
OUT VIDEO
INPUT Y
P
B
PR


L
R
123
12
L
RTO AUDIO 
AMP
AUDIO
IN ANT 
HDMIAV IN
AUDIO 
OUTL
RNote:  Use analog audio when
digital audio is not available
* The connector on the television is HDMI Type A connector.