Panasonic Hdtv Monitor Ct 32hl43 Operating Instructions

							HDTV Monitor
Operating Instructions
Monitor HDTV
Instrucciones de Operación
Écran à haute définition
Manuel d’utilisation
TQB2AA0467 30422
PRINTED IN USA
IMPRESO EN EE.UU
IMPRIMÉ AUX ÉTATS-UNIS
CT-32HL43
CT-36HL43CT-32HC43
CT-32HXC43
CT-36HC43 
						

							ENGLISHANY CHANGES OR MODIFICATIONS TO THIS TV 
RECEIVER NOT EXPRESSLY APPROVED BY
MATSUSHITA ELECTRIC CORPORATION OF AMERICA
COULD CAUSE HARMFUL INTERFERENCE, WHICH 
WOULD VOID THE USER’S AUTHORITY TO OPERATE
THIS EQUIPMENT.  FCC CAUTION:
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:WARNING: To reduce the risk of electric shock do not remove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance. The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.RISK OF ELECTRIC SHOCK
DO NOT OPEN WARNING
WARNING:   To reduce the risk of fire or electric shock, do not expose this 
apparatus to rain or moisture and objects filled with liquids, such as vases, 
should not be placed on this apparatus.The Energy Star label, a symbol for energy efficiency, was created by the U.S. 
Environmental Protection Agency (EPA) and the U.S. Department of Energy 
(DOE) to help customers identify products that can save them money and protect 
the environment by saving energy. Energy Star compliant products generally 
consume less energy than similar standard products.The Class II insulation symbol (square within a square) indicates 
that this product has been evaluated and tested to comply with 
Class II insulation requirements.
FCC INFORMATION
This equipment has been tested and found to comply with the limit for a Class B Digital Device in
accordance with the specifications in Part 15 of the FCC Rules. The limits are designed to provide
reasonable protection against radio and television interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications, However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception (which you can determine by
turning the equipment off and on), try to correct the interference by one or more of the following measures.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866,
5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
High Definition Sound 
						

							TABLE OF CONTENTS1 lENGLISHTable of Contents
Congratulations...............................................2
Customer Record........................................................   2
Care and Cleaning......................................................   2
Specifications..............................................................   2
Feature Chart..............................................................   2
Installation........................................................3
Television Location.....................................................   3
Optional Cable Connections.......................................   3
AC Power Supply Cord...............................................   3
Cable / Antenna Connection.......................................   3
Important Information..................................................   3
Initial Set Up Menu...........................................4
Optional Equipment Connections..................5
VCR............................................................................   5
Cable Box...................................................................   5
VCR and Cable Box....................................................   5
Amplifier (TO AUDIO AMP)........................................   6
Digital TV - Set-Top Box (DTV-STB) or DVD Players   6
Front Control Panel.....................................................   6
DVI (Digital Visual Interface) input connection...........   7
Program Out connection.............................................   7
Special Remote Butttons............................................   7
PIP And Split Operation..................................8
PIP Operation ............................................................   8
Split Operation ...........................................................   8
PIP and Split Operation With a Cable Box ................   8
PIP And Split Operational Buttons.................8
TV/Video Button..........................................................   8
Search Button..............................................................  8
Move Button.................................................................  9
PIP MIN and PIP MAX Buttons....................................  9Freeze Button..............................................................  9
Main Picture Freeze Feature.......................................  9
PIP, Split and Freeze Mode Butons 
Operational Chart.....................................................  9
Remote Control Operation (models 
CT-32HXC43, CT-32HC43 and CT-36HC43).......... 10
Battery Installation...................................................... 10
Operating Components with Remote Control............. 11
Programming the Remote.......................................... 12
Programming Without a Code.................................... 12
Component Codes..................................................... 12
Remote Control Operation 
(models CT-32HL43 and CT-36HL43)....... 14
Battery Installation...................................................... 14
Operating Components with Remote Control............. 15
Programming the Remote.......................................... 17
Programming Without a Code.................................... 17
Component Codes..................................................... 17
Basic Menu Navigation................................. 20
Icon Menus Operation.................................. 21
Picture........................................................................ 21
Audio.......................................................................... 21
Channels.................................................................... 22
Timer.......................................................................... 22
Lock............................................................................ 23
Set Up........................................................................ 26
Troubleshooting Chart................................. 27
Index............................................................... 28Note:The warranty and service center information is located in the back of this manual.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2003 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.  
						

							2 lCONGRATULATIONSENGLISHCongratulations
Your new Panasonic Tau television features state-of-the-
art technology for high quality picture and sound with
complete audio/video connections for your home theater
system. Your TV is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.
Customer Record
The model and serial number of this product are located on
the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at: www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
•Use a mild soap solution or window cleaner with a soft
clean cloth. DO NOT USE ABRASIVE CLEANERS.
•Avoid excessive moisture and wipe dry.
Note:Do not spray any type of cleaning fluid directly on the
screen.
Cabinet and Remote Control
•For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.
•Do not use benzene, thinner or other petroleum based
products. 
Specifications
Specifications are subject to change without notice or
obligation.   Feature Chart Power Source
CT-32HC43(3.6A)
CT-32HC43U(3.6A)
CT-32HL43(3.6A)
CT-32HL43U(3.6A)
CT-32HXC43(3.6A)
CT-36HC43(3.6A)
CT-36HC43U(3.6A)
CT-36HL43(3.6A)
CT-36HL43U(3.6A)120V AC, 60HzChannel Capability - 181VHF-12; UHF-56; Cable-113Video Input Jacks1Vp-p, 75 Ohm, Phono Jack TypeAudio Input Jacks500mV RMS 47K Ohm Video out jack1Vp-p, 75 Ohm, Phono Jack Type Audio Output Jacks0-2.0V RMS 4.7K OhmDVI Input jack (some models)1.0 compatibleComponent Input (Y / P
B / P
R)75 Ohm, Phono Jack Type S-Video Input JacksS-Video (Y-C) ConnectorMODELS
CT-32HL43
CT-36HL43
CT-32HC43
CT-36HC43
CT-32HXC43FEATURESMENU LANGUAGE ENG/
SPAN/FR•  •  •  2 TUNER SPLIT•  •  •  2RF•  •  •  CLOSED CAPTIONING•  •  •  V-CHIP CAPABILITY •  •  •  DIGITAL SCAN RATE 1080i, 
480p1080i, 
480p1080i, 
480pNTSC LINE-DOUBLER  480p 480p 480pVIDEO NORM•  •  •  AUDIO NORM•  •  •  STEREO•  •  •  AI SOUND•  •  •  BASS/BALANCE/TREBLE•  •  •  SURROUND•  •  •  SUBWOOFER•      BBE VIVA 3D •      BBE•  •  •  A/V IN (REAR/FRONT)4
 (3/1)  4
 (3/1)4
 (3/1)AUDIO OUT•  •  •  DVI INPUT•      S-VHS INPUT •  •  •  COMPONENT INPUTS•  •  •  HEADPHONE JACK•  •  •   
						

							INSTALLATION3 lENGLISHInstallation
Television Location
This unit is intended to be used with an optional stand or
entertainment center. Consult your dealer for available
options.
•Avoid excessive sunlight or bright lights, including
reflections.
•Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
•Fluorescent lighting may reduce remote control
transmitting range.
•Keep away from magnetic equipment, including motors,
fans and external speakers.
WARNING: Use this television receiver only with the
cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
In order to avoid injury to children, never place your television
receiver on a piece of furniture that is capable of being tilted by a
child leaning on it, pulling on it, standing on it, or climbing on it. A
falling television can cause serious injury or even death.  
CT-32HL43, CT-32HL43U:
CAUTION: These television receivers for use only with
PANASONIC TY-32HL43T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
CT-36HL43, CT-36HL43U:
CAUTION: These television receivers for use only with
PANASONIC TY-36HL43T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
Optional Cable Connections
Shielded audio and video cables should be used between
components. For best results:
•Use 75-ohm coaxial shielded cables.
•Use appropriate input and output connectors, that match
your component connectors.
•Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection
is required.Cable Connection
Connect the cable supplied by your local
cablecompany to ANT1 connection on
back of television. Select cable mode and
ANT1 in the SET UP menu (refer to page
26). 
Note:A cable converter box may be
required for proper reception.
Check with your local cable company for compatibility
requirements.
Antenna Connection
•For proper reception of VHF/UHF channels, an
external antenna is required. For best reception an
outdoor antenna is recommended.
•Connect home antenna to
ANT1 connection on back of
television. Select TV mode
and ANT1 in the SET UP
menu. (refer to page 26)   
Note:Cable Mode is preset at the
factory. Antenna users must
change to TV Mode and ANT 1 in the Set Upmenu.
Important Information Regarding The Use Of 
Video Games, Computers, Or Other Fixed 
Image Displays.Polarized plug75 Ohm VHF/UHF
on back of TVIncoming Cable from
Cable CompanyIncoming Cable fromHome AntennaWARNING: The marking or retained image on the
picture tube resulting from viewing fixed image is
not an operating defect and as such is not covered
by Warranty. 
The television is designed to display constantly moving
images on the screen. Continuous viewing of
stationary images such as letterbox pictures on
standard screen TVs (with top/bottom bars), non-
expanded standard (4:3) pictures on wide screen TVs
(with side bars shown on each side of an image), stock
market report bars (ticker running at the bottom of the
screen), video game patterns, fixed scoreboards,
bright station logos, on-line (Internet) or repetitive
computer style patterns should be limited.
The extended use of fixed image program material can
cause a permanent picture tube damage, shown as a
“shadow image” viewable on normal programs. This
type of irreversible picture tube deterioration can be
limited by performing the following steps:
•Limit the display of fixed image program material to
no more than 15% of total viewing time per week.
•Turn the power off when not in use. 
						

							4 lINITIAL SET UP MENUENGLISHInitial Set Up Menu
For your convenience, Auto Set up menu will be displayed
on screen when the set is turned on for the first time. If
needed, follow the menus and procedures for setting up the
features.
IDIOMA/LANGUE
To change menu language to ENGLISH, SPANISH or
FRENCH.
Procedure
•Press VOL u to select English, Spanish or French. 
MODE
To select TV (antenna) or CABLE mode depending on the
signal source. 
Procedure
•Press VOL u to select TV or CABLE. 
AUTO PROGRAM
To automatically program all channels with a signal.
Procedure
•Press VOL u to start Auto Programming. 
GEOMAGNETIC CORRECTION
This feature is used to adjust discoloration of the picture
due to the earth’s magnetic field in the area.
Procedure
•Press VOL u to display adjustment menu.
•Press tVOL or VOL u to adjust discoloration in
picture.  TILT CORRECTION
This feature is used to adjust the tilt of the picture due to
earth’s magnetic field in the area. 
Procedure
•Press VOL u to display adjustment menu.
•Press tVOL or VOL u to adjust picture tilt. 
						

							OPTIONAL EQUIPMENT CONNECTIONS5 lENGLISHOptional Equipment Connections
Notes:
•The remote control must be programmed with supplied
codes to operate the optional equipment.
•Models CT-32HC43, CT-36HC43 and CT-32HXC43 do
not have DIGITAL INPUT.
VCR Connection 
Follow this diagram when connecting your television to a
VCR only.  
Viewing a television program
Procedure
•Select ANT1 in the SET UP menu under Prog Chan
(Program Channels).
•Tune the television to the program you want to view.
Viewing a video
Procedure
rOption A
•Select ANT1 in the SET UP menu.
•Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
•Begin the video.
rOption B
•Select ANT2 in the SET UP.
•Tune the television to Channel 3 or 4, depending on your
VCR.
•Begin the video.
Recording a television program
Procedure
rOption A (Recording and viewing the same program)
•Select ANT2 in the SET UP menu.
•Tune the television to Channel 3 or 4, depending on your
VCR.
•Using the VCR, tune to the television program you want
to record.
•Begin recording.
rOption B (Recording one program while viewing another
program)
•Select ANT1 in the SET UP menu under Prog Chan.
•Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
•Using the VCR, tune to the television program you want
to record.
•Begin recording.
•Press the TV/VIDEO button on the remote control to
switch back to TV mode.•Tune the television to the program you want to view. 
Cable Box Connection
Follow this diagram when connecting your television to a
cable box only.  
Viewing a premium (scrambled) cable channel
Procedure
•Select ANT2 in the SET UP menu.
•Tune the television to Channel 3.
•Using the cable box, tune to the premium cable channel
you want to view.
Note:To use special features such as Favorite Channels and
Channel Captions ANT1 must be selected in the SET UP
menu. 
VCR and Cable Box Connection
Follow this diagram when connecting your television to
both a VCR and a cable box. 
Viewing a premium (scrambled) cable channel
Procedure
•Select ANT2 in the SET UP menu.
•Tune the television to Channel 3.
•Using the cable box, tune to the premium cable channel
you want to view.
Note:To use special features such as Favorite Channels and
Channel Captions ANT1 must be selected in the SET UP
menu.  
						

							6 lOPTIONAL EQUIPMENT CONNECTIONSENGLISHOptional Equipment Connections (cont.)
VCR and Cable Box Connection (Cont.)
Note:Models CT-32HC43, CT-36HC43 and CT-32HXC43 do
not have DIGITAL INPUT.
Recording a premium (scrambled) cable channel
Procedure
•Select ANT2 in the SET UP menu.
•Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
•Turn the VCR ON.
•Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.
•Using your cable box, tune to the premium cable channel
you want to record.
•Begin recording.
rTo view a different channel while recording:
•Select ANT1 in the SET UP menu.
•Press the TV/VIDEO button on the remote control to TV
mode.
•Tune the television to a program (except another
premium cable channel).
Amplifier Connection (TO AUDIO AMP)         
To listen the audio through a separate stereo system,
connect an external audio amplifier TO AUDIO AMP
outputs on back of television.
Note:TO AUDIO AMP terminals cannot be connected directly
to externalspeakers. 
Audio Adjustments
•Select SPEAKERS ON located in the onscreen AUDIO
menu. 
•Set amplifier volume to minimum.
•Adjust television volume to desired level.
•Adjust amplifier volume to match the television.
•Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu. 
•Volume, mute, bass, treble and balance are now
controlled through the television. 
Note:Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.Digital TV - Set-Top Box (DTV-STB) or DVD 
Connection
This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STV must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.  
Use this diagram to connect the DTV-STB (Digital TV Set-Top-
Box) or DVD player to the back of   
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the video inputs. See the optional equipmentmanual for
details.
Procedure
•Connect equipment to front Audio/Video input jacks.
•Press TV/VIDEO button to select VIDEO 4 input mode.
•Operate optional equipment as instructed in equipment
manual.Note:The ON/OFF indicator LED (red) will be lit when set
is on.  
						

							OPTIONAL EQUIPMENT CONNECTIONS7 lENGLISHOptional Equipment Connections (cont.)
DVI (Digital Visual Interface) input connection
(for models CT-32HL43 and CT-36HL43 only)
The DVI/HDCP1
 input on your TV can accommodate copy
protected digital programming. The DVI/HDCP input
terminal complies with the EIA-861Profiles2
 standard and is
not intended for use with personal computers. The DVI/
HDCP input can be connected to an EIA/CEA 861
compliant consumer electronic device, such as a set top
box or DVD player equipped with a DVI output connection3
.
The DVI/HDCP input is designed for best performance with
HDTV signals, such as 1080i. The DVI/HDCP input will
also accept and display 480i and 480p picture signals.
Notes:
1.DVI/HDCP = Digital Visual Interface / High-Bandwidth
Digital Copy Protection.
2.EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
3.Consult your consumer electronics dealer for availability
details.
Follow the diagram below to connect the TV to a set top
box or a DVD player. 
Procedure
•Press TV/VIDEO button on the remote control to select
DIGITAL-IN input.
•Connect the DVI output from the set top box or a DVD
player to the DVI input on the back of the TV.
•Connect the Audio Out signal from the set top box or
DVD player to the Audio In input associated with the
DIGITAL INPUT.
Note:This HDTV Monitor is not intended to be used with a PC.Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.
Note:If the Main Picture signal is Component Video Input, no
Program out signal will be available..
Procedure
•Connect optional equipment to PROG OUT a ndTO
AUDIO AMP terminals.
•PROG OUT terminal display is the same as on-screen
display.
•See optional equipment manual for further instructions
for recording and monitoring.
Special Remote Buttons
ASPECT Button
The ASPECT button on the remote control lets you select
the picture size ratio to match programming format when
using DTV STB or DBS. 
BBE Button
Press this button to turn the BBE VIVA 3D feature
(available in CT-36HL43 and CT-32HL43 only) or BBE
®
sound feature On or Off. 
SAP Button
Press this button to let you cycle through different audio
modes. If you are receiving a stereo program and you
press the SAP button, you can cycle between STEREO
and MONO.VCROR MONITOR TERMINALS ON BACK OF TV
CABLES NOT SUPPLIED 
						

							8 lPICTURE IN PICTURE AND SPLIT OPERATIONENGLISHPicture In Picture and Split Operation
Note:The shapes of PIP and SPLIT function buttons may vary
depending on the remote control.
PIP Operation
This television includes a two-tuner Picture In Picture (PIP)
feature. This allows you to watch two (2) live broadcasts at
the same time with or without an external video source
such as a VCR, cable box, etc.
Procedure
•Connect incoming cable to ANT 1 input on back of TV.
•Press  to display PIP frame.
•Select channels for the PIP frame by pressing
.
•Select channels for the Main picture by pressing
or use the remote control numeric keypad.
•Press  to switch the PIP and MAIN PICTURE
source.
•Press  to view picture source status. 
•Press  to cancel PIP frame.
Split Operation
This feature lets you watch two different channels side by
side with or without an external video source.
Procedure
•Press  to display Split screen.
•Select channels for the Split by pressing .
•Select channels for the Main picture by pressing
or use the remote control numeric keypad.
•Press  to switch the SPLIT SCREEN and MAIN
PICTURE source.
•Press  to view picture source status.
•Press  to cancel Split screen.PIP and Split Operation With a Cable Box
To view premium (scrambled) cable channels through your
cable box in the Main Picture:
Note:Use this procedure if you want to watch premium cable
channels in the Main Picture while viewing a television
program or video in the PIP or Split frame.
Procedure
•Select ANT 2 in the SET UP menu.
•Tune TV to Channel 3.
•Press  or on the remote control to display
the PIP or Split frame.
Note:Audio is from the Main Picture only.
•Verify the Cable box is ON.
•Choose channels for the Main Picture by tuning the
cable box.
•Choose channels for the PIP frame by pressing
.
Note:Swap is not available when using the cable box to tune
channels. If your cable box has video output, it can be
connected to the TV to allow you to use all PIP functions.
See the equipment manual for more information.
PIP and Split Operational Buttons
TV/VIDEO Button 
Press when PIP or Split frame is displayed to select
desired input mode.   
Search Button (PIP and Split)
This feature lets you scan through all available channels.
Procedure
•Press  or  to display PIP or Split frame.PIP     PIP CHor
CHCHSWARECALLPIPNote:Audio is from Main Picture only.Main PicturePIP FrameSPLIT     PIP CHor
CHCHSWARECALLSPLITPIPSPLIT       PIP CHPIP FrameMain PictureCH #
COMPONENT1COMPONENT2DIGITAL-IN
VIDEO 1/2/3/4Main PictureSPLIT FrameCOMPONENT1COMPONENT2DIGITAL-IN
VIDEO 1/2/3/4(some models)
(some models)PIPSPLIT