Panasonic Hdc Sd800 Owners Manual

							81VQT3K35
∫Functions that cannot be used during 3D recording
When recording with the 3D Conversion Lens, you cannot use certain functions.
Functions not available during 3D recording
*1 The zoom position is fixed, and the zoom operation is disabled.
*2 The Optical Image Stabilizer   and Optical Image Stabilizer Lock   can be used.
*3 Intelligent Auto Mode is canceled.
*4 The 1080/60p recording mode is canceled, and the video is recorded with AVCHD picture 
quality.
*5 Only White Balance can be used. 
Touch   to display the Manual icon.
(Button/lever operations) (Recording functions)
jZoom in/out function
*1
jHybrid Optical Image Stabilizer*2
jIntelligent auto mode*3
j1080/60p recording*4
jStill picture recording (Still Picture 
Recording Mode, and still picture 
recording in Motion Picture 
Recording Mode)
j Manual operations
*5 (focus, shutter 
speed, iris)
j [EXT DISPLAY] (remote control) j
AF/AE tracking
j iFrame ([REC MODE])
j Intelligent contrast control
j Smile shot
j Soft skin mode
j Te l e  m a c r o
j Guideline
j Color night rec
j Scene mode
j Digital cinema
j Face recognition
j Digital cinema color
j Zoom microphone
j Picture adjust
j Luminance
j Histogram
(Setup menu)
jQuick power on
j Quick start
j Initial set
HDCSD800P-VQT3K35_mst.book  81 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							82VQT3K35
Motion picture playback using operation icon
For details on the basic playback operations, refer to page 36.
Advanced (Playback)
Playback Operations
Playback operationPlayback displayOperating steps
Fast forward/
rewind playback During PlaybackTo u c h  
5 during playback to fast 
forward.
(Touch  6 to rewind.)
≥ The fast forward/rewind speed 
increases if you touch  5/6  again. 
(The display on the screen changes 
from  5 to  .)
≥ Normal playback is restored when you 
touch .
Skip playback
(to the start of a  scene) Slide the LCD screen display right to left 
(left to right) while touching it during 
playback.
Slow-motion  playback
During Pause With the playback paused, continue 
touching .
(  is for slow rewind playback)
Playback is slow while touching.
≥
Normal playback is restored when you 
touch .
≥ When slow-motion pictures are played 
back in reverse, they will be shown 
continuously at approximately 2/3
rd the 
speed of normal playback (intervals of 
0.5 seconds).
≥ Slow-motion playback for iFrame 
scenes will be in 1 second intervals.
Frame-by-frame  playback
The motion 
picture is 
advanced one 
frame at a time. With the playback paused, touch  .
(Touch   to advance the frames one 
at a time in the reverse direction.)
≥
Normal playback is restored when you 
touch .
≥ When the frames are advanced one at a 
time in the reverse direction, they will be 
shown in intervals of 0.5 seconds.
≥ Frame-by-frame playback for iFrame 
scenes will be in 1 second intervals.
HDCSD800P-VQT3K35_mst.book  82 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							83VQT3K35
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
Picture size of the still picture to be recorded is   (1920k1080).
1Pause at the scene you want to save as a still picture during 
playback.
≥ It is convenient to use slow-motion playback and frame-by-frame playback.
2Press the   button fully.
≥Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Playback operationPlayback displayOperating steps
Direct playback During Playback Touch the Direct playback bar or slide 
it while touching.
≥
The playback pauses temporarily and 
skips to the position touched or slid to 
while touching.
≥ Playback will start by releasing your 
touching or sliding finger.
≥ Direct playback bar cannot be operated 
with the remote control.
2.1M
HDCSD800P-VQT3K35_mst.book  83 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							84VQT3K35
Highlight&Time frame index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be 
played back from any midway point of the scene you wish to see.
≥Operate the zoom lever to   side and change over the 
thumbnail display to Highlight&Time frame index. ( l37)
1Touch .≥To display the next (previous) page:
jSlide the thumbnail display upward (downward) while 
touching it.
j Switch the Touch Menu, and then touch   (up)/  (down) on the 
thumbnail scroll lever.
2Touch the desired search condition.[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]*
* It is not displayed on iFrame scenes.
≥When select [FACE], it will select the portion for which face recognition was performed from the 
scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
≥A portion judged to be clearly recorded will be detected and displayed in thumbnail if you 
select [HIGHLIGHT].
3(When [MINUTES] is selected)
Touch  /  to set the time.≥It can be set up to a maximum of 60 minutes.
≥ Touch [ENTER].
4Touch the thumbnail to be played back.≥Next (Previous) thumbnail can be displayed by touching  / .
Repeat playback
Playback of the first scene starts after playback of the last scene finishes.
The   indication appears on the full screen views.
≥All the scenes are played back repeatedly. (Wh en playing back motion pictures by date, all 
the scenes on the selected date are played back repeatedly.) : [VIDEO SETUP] 
# [REPEAT PLAY]  # [ON]
MENU
HDCSD800P-VQT3K35_mst.book  84 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							85VQT3K35
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped.
If playback of a motion picture is stopped,   appears on the thumbnail view of the stopped scene.
≥The memorized resume position is cleared if you turn off the unit or change the mode.
(The setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback 
(Playback zoom)
You can zoom in by touching a still picture during playback.
1Touch and hold the part you wish to zoom in on during still picture playback.
≥The still picture is zoomed in the following order:  k1 #  k2 #  k 4. Touch and hold the 
screen to zoom in from the normal display to  k2, Touch the screen to zoom in from  k2 to 
k 4.
≥ The still picture is zoomed in on, centering on the part you touched.
2Move to the zoomed in position by touching  /
/ /  or slide while touching the screen.
≥The location of the zoom displays for about 1 second when 
zooming in (zooming out) or moving the displayed location.
≥
The more picture is enlarged, the more its quality deteriorates.
Zooming out from the zoomed still pictureTouch   to zoom out. ( k4 #  k2 #  k1)
≥ Touch   to return to normal playback ( k1).
≥ You can also perform zoom operations using the zoom lever. : [VIDEO SETUP] 
# [RESUME PLAY]  # [ON]
MENU
ADisplayed location of 
the zoom
HDCSD800P-VQT3K35_mst.book  85 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							86VQT3K35
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1Touch the date select icon. (l26)
2Touch the playback date.
The scenes or the still pictures recorded on the date 
selected are displayed as thumbnails.
3Touch the scene or the still picture to be 
played back.
≥Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode 
is changed.
≥ Even if AVCHD scenes are recorded on the same day, they are grouped separately in the 
following cases. –1, –2... is added after the recording date displayed on the screen.
jWhen the number of scenes exceeds 99
j When the Interval recording is used
≥ Even if AVCHD scenes or 1080/60p scenes are recorded on the same day, they are 
grouped separately when switching between  AVCHD and 1080/60p recordings. –1, –2... is 
added after the recording date displayed on the screen.
≥ Even if iFrame scenes are recorded on the same day, they are grouped separately in the 
following cases.
jWhen the number of scenes exceeds 99
j When [NUMBER RESET] is performed
≥ Even if still pictures are recorded on the same day, they are grouped separately in the 
following cases.
jWhen the number of still pictures exceeds 999
j When pictures are recorded in Hi-Speed Burst Shooting mode (  is indicated after the 
date in the list by date)
j When [NUMBER RESET] is performed
≥  is displayed after the date in the list by date for the still pictures created from the motion 
picture. ( l83)
Advanced (Playback)
Various playback functions
ALL
A Date select icon
HDCSD800P-VQT3K35_mst.book  86 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							87VQT3K35
Highlight Playback
Part that was recognized as clearly recorded is extracted from a long recording, and it can be 
played back in a short time with effects and music added.
≥Highlight playback cannot be used for iFrame scenes.
1Touch . ( l26)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3Touch [START].≥When the [SCENE SETUP] is not changed in step 2, it will playback with the last recorded 
date.
4Select the playback operation. ( l36, 82)≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
≥Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not possible.≥ Highlight playback cannot be performed wi th interval-recorded motion pictures. (l62)
∫ Scene setting
1 Touch [SELECT SCENES] or [SELECT DATE].
2 (When [SELECT SCENES] is selected)
Touch the scenes to be played back.
≥Up to 99 scenes can be selected in succession.
≥ When touched, the scene is selected and   is displayed. 
Touch the scene again to cancel the operation.
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded by red. 
Touch the date again to cancel the operation.
3 Touch [Enter]/[ENTER].
[SCENE SETUP]:Select the scene or date to be played back.
[PRIORITY SETUP]:Select the target to give priority to play back. ( l88)
[PLAYBACK TIME]:Select the time to play back. ( l88)
[EFFECT SETUP]:Select the effect for playback. ( l88)
[MUSIC SELECT]:Select the music to be played on playback. ( l88)
ALL
HDCSD800P-VQT3K35_mst.book  87 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							88VQT3K35
∫Priority setting
1 Touch [FACE] or [FACE RECOG.].≥If you touch [FACE], any detected face, including the face of person registered for Face 
Recognition, is given priority on playback.
2 (When [FACE RECOG.] is selected)
Touch a face to specify.
≥You can specify up to 6 faces, which are to be played back in priority.≥When touched, the registered face is selected and surrounded 
by red. Touch the registered face again to cancel the 
operation.
≥ Touch [ENTER]. When a single face is specified, the name registered for that face is 
displayed. When multiple faces are specified, the number of faces is displayed.
∫ Playback time setting
Touch the playback time.≥The playback time of [AUTO] is a maximum of approx. 5 minutes.≥Playback time may become shorter than the setting, or it may 
not even play back if the part recognized as clearly recorded is 
short.
∫ Effect settingEffects such as fade, slow-motion, still (pause), or digest playback are inserted.1 Touch the desired effect.
≥When the effect setting is changed, music setting will be set the same as the effect setting. 
(To set the effect setting and music setting to different settings, change the music setting 
after setting the effect setting.)
2 Touch [ENTER].
∫ Music setting
1 Touch your favorite music.≥When [EFFECT SETUP] is set to [NONE], you will be able to 
select [NO MUSIC]. When [NO MUSIC] is selected, the audio 
recorded at the time of shooting is played back.
≥ To adjust the volume of music during playback or audio 
testing, operate the volume lever. ( l37)
2 Touch [ENTER].
To test the music audio
Touch [START].
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
[POP]:Recommended for enjoyable 
situations such as party scene.
[CLASSICAL]:Recommended for slow moving 
scene.
[NATURAL]:Recommended for scenery.
[DYNAMIC]:Recommended for fast moving scene such as sports scene.
[NONE]:Effect is off.
11 12 2
2333
44
45 55666
123
45 6ANNA
KEN MARY
JOE
HDCSD800P-VQT3K35_mst.book  88 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							89VQT3K35
Changing the playback settings and playing back the 
slide show
1Touch . (l26)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [EFFECT SETUP] is selected)
Touch the desired effect.≥When the effect setting is changed, music setting will be set 
the same as the effect setting. (To set the effect setting and 
music setting to different settings, change the music setting 
after setting the effect setting.)
≥ When [EFFECT SETUP] is set, [SLIDE INTERVAL] cannot be set.
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
[DATE SETUP]: Select the date to be played back.
[EFFECT SETUP]: Select the effect for playback. ( l88)
[SLIDE INTERVAL]: Selects the interval between still pictures at playback.
[MUSIC SELECT]: Select the music to be played on playback.
[SHORT]: Approx. 1 second
[NORMAL]: Approx. 5 seconds
[LONG]: Approx. 15 seconds
ALL
HDCSD800P-VQT3K35_mst.book  89 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							90VQT3K35
(When [MUSIC SELECT] is selected)
Touch the desired sound.≥To adjust the volume of music during playback of the slide 
show or audio testing, operate the volume lever. ( l37)
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the playback operation. ( l36)≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
HDCSD800P-VQT3K35_mst.book  90 ページ  ２０１０年１２月２０日　月曜日　午前９時４分