Panasonic Hdc Sd800 Owners Manual

							121VQT3K35
≥Even if the system  requirements mentioned in this owner’s manual are fulfilled, some PCs 
cannot be used.
≥ A CD-ROM drive is necessary to install the su pplied software applications. (A compatible 
Blu-ray disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/DVD.)
≥ Operation is not guaranteed in the following cases.
jWhen 2 or more USB devices are connected to a PC, or when devices are connected 
through USB hubs or by using extension cables.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
≥ This software is not compatible with Micr osoft Windows 3.1, Windows 95, Windows 98, 
Windows 98SE, Windows Me, Windows NT and Windows 2000.
∫ Operating environment for HD Writer AE 3.0
With a PC
Operating environment
PC IBM PC/AT compatible PC
OSWindows 7 (32 bit/64 bit) Starter/Home Basic/Home Premium/
Ultimate/ProfessionalWindows Vista (32 bit) Home Basic/Home Premium/Business/
Ultimate (SP1/SP2)
Windows XP (32 bit) (SP3)
CPU Intel Pentium 4 2.8 GHz or higher (including compatible CPU)
≥Intel Core 2 Duo 2.16 GHz or higher or 
AMD Athlon 64 X2 Dual-Core 5200+  or higher is recommended 
when using playback function or MPEG2 output function.
≥ Intel Core 2 Quad 2.6 GHz or higher is recommended when 
using editing or Continuous Photo Playback function.
≥ Intel Core i7 2.8 GHz or higher is recommended when playing 
back or using the editing function for 1080/60p
RAM Windows 7: 1 GB or more (32 bit)/2 GB or more (64 bit)
Windows Vista: 1 GB or more
Windows XP: 512 MB or more (1 GB or more recommended)
HDCSD800P-VQT3K35_mst.book  121 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							122VQT3K35
≥Supplied CD-ROM is available for Windows only.
≥ Input is not supported in languages other than English, German, French and Simplified 
Chinese.
≥ Operation cannot be guaranteed on all Blu-ray disc/DVD drives.
≥ Operation is not guaranteed on Microsof t Windows Vista Enterprise, Windows XP 
Media Center Edition, Tablet PC Edition and Windows 7 Enterprise.
≥ This software is not compatible with a multi-boot environment.
≥ This software is not compatible with a multi-monitor environment.
≥ If using Windows XP, an administrative account user only can use this software. If using 
Windows Vista/Windows 7, ad ministrative account and standard account users only can 
use this software. (An administrative account user should install and uninstall this 
software.)
∫ To use the HD Writer AE 3.0
You will need a high performance PC depending on the functions to be used. It may not 
properly play back or properly operate depending on the environment of the PC used. Refer 
to the operating environment and notes.
≥Operation during the playback may become slow if the CPU or memory is not fulfilling the 
requirements of the operating environment.
≥ Always use the most current driver for the video card.
≥ Always make sure there is enough capacity on the HDD in the PC. It may become 
inoperable or the operation may stop suddenly if the capacity gets low.
Display High Color (16 bit) or more (32 bit or more recommended)
Desktop resolution of 1024 k768 pixels or more (1920 k1080 
pixels or more recommended)
Windows 7/Windows Vista: DirectX 9.0c compatible video card 
(DirectX 10 recommended)
Windows XP: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Express
™k 16 compatible recommended
Video memory of 256 MB or more recommended
Free hard disk 
drive space Ultra DMA — 100 or more
450 MB or more (for installing the software)
≥
When writing to a DVD/Blu-ray disc/SD, more than double the 
amount of free space as the disc being created is necessary.
Sound DirectSound Support
InterfaceUSB port [Hi-Speed USB (USB 2.0)]
Other 
requirementsMouse or equivalent pointing device
Internet connection
HDCSD800P-VQT3K35_mst.book  122 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							123VQT3K35
∫Operating environment for the card reader function (mass storage)
≥The USB equipment operates with the driver installed as standard in the OS.
PC IBM PC/AT compatible PC
OSWindows 7 (32 bit/64 bit)
Windows Vista (32 bit) (SP1/SP2)
Windows XP (32 bit) (SP3)
CPUWindows 7/Windows Vista: 1.0 GHz or higher
Windows XP: Intel PentiumIII 450 MHz or higher or Intel Celeron 
400 MHz or higher
RAM Windows 7: 1 GB or more (32 bit)/2 GB or more (64 bit)
Windows Vista Home Basic: 512 MB or more
Windows Vista Home Premium/Business/Ultimate/Enterprise:
1GB or more
Windows XP: 128 MB or more (256 MB or more recommended)
InterfaceUSB port
Other 
requirementsMouse or equivalent pointing device
HDCSD800P-VQT3K35_mst.book  123 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							124VQT3K35
When installing the software, log on to your computer as the Administrator or with a user 
name with equivalent authorization. (If you do not have authorization to do this, consult your 
manager.)
≥Before starting the installation, close all applications that are running.
≥ Do not perform any other operations on your PC while the software is being installed.
≥ Explanation of operations and screens is based on Windows 7.
1Insert the CD-ROM into the PC.≥The following screen is displayed automatically. Click [Run setup.exe]  # [Yes].
≥ If Windows 7 is in use, or the following screen is not displayed automatically, select [Start] 
#  [Computer] (or double-click on [Compute r] on the desktop), and then double-click 
[Panasonic].
2Click [Next].
3Read the [End User License Agreement], then place a check beside 
[I accept the terms of the license agreement] if you agree to them 
and click [Next].
4Select the country or region where you live, 
then click [Next].
≥ If the country or region cannot be selected, select [NTSC 
Area].
≥ When the confirmation message appears, click [Yes].
5Select where the application is to be 
installed, then click [Next].
6Select [Yes] or [No] to create shortcut.≥A message regarding the playback in the environment 
used may be displayed depending on the performance of 
the PC used. Click [OK] after confirming.
With a PC
Installation
HDCSD800P-VQT3K35_mst.book  124 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							125VQT3K35
7When installation is complete, some notes will appear.
Check the contents, then close the window.
8Select [Yes, I want to restart my computer 
now.], then click [Finish].
∫Uninstalling HD Writer AE 3.0
Follow the steps below to uninstall any software applications that you no longer require.
1Select [Start]  # [Control Panel]  # 
[Uninstall a program].
2Select [HD Writer AE 3.0], then click 
[Uninstall].
≥ Proceed with the uninstallation by following 
the on-screen instructions.
≥ After uninstalling the software, be sure to 
reboot the PC.
The PC must be rebooted for the 
application to work.
HDCSD800P-VQT3K35_mst.book  125 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							126VQT3K35
≥Connect this unit to the PC after the  software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1Connect this unit to the AC adaptor.≥It is possible to use the unit connected to the PC with the batteries only, but you will not be 
able to write data into the unit. Use the AC adaptor to free you from worrying about the 
battery running down.
≥ Connect with the AC adaptor when using the Conversion Assist Function.
2Turn on the unit.≥This function is available in all modes.
3Connect this unit to a PC.
≥The USB function selection screen will appear.
4Touch [PC] on the screen of this unit.≥The Smart Wizard Screen is automatically displayed when HD Writer AE 3.0 is installed.
≥ This unit is automatically recognized as an external drive of the PC. ( l128)
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen 
to turn the LCD monitor on.
With a PC
Connecting to a PC
HDCSD800P-VQT3K35_mst.book  126 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							127VQT3K35
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed 
with any other USB cables.)
≥ When the unit is connected to a PC, it cannot be turned off.
Disconnect the USB cable, before turning this unit off.
≥ When performing reading/writing between a PC and an SD card, be aware that some SD 
card slots built into PCs and some SD ca rd readers are not compatible with the SDHC 
Memory Card or SDXC Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
∫ To disconnect USB cable safely
Select the   icon in task tray displayed on the PC, and then click [Eject Panasonic 
Camcorder].
≥Depending on your PC’s settings, this icon may not be displayed.
About the screen indication of the unit
≥Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp 
is on or card access icon ( ) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC, 
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the 
battery and/or AC adaptor, wait approximatel y 1 minute again, and then turn the unit 
back on. (Data may be destroyed when above operation is performed while accessing 
the SD card)
HDCSD800P-VQT3K35_mst.book  127 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							128VQT3K35
About the PC display
When the unit is connected to a PC, it is recognized as an external drive.
≥Removable disk (Example:  ) is displayed in [Computer].
Example folder structure of an SD card: The following data will be recorded.
1
Up to 999 still pictures in JPEG 
format ([S1000001.JPG] etc.)
2 iFrame format motion picture files 
([S1000001.MP4] etc.)
3 JPEG format still pictures recorded 
in Hi-speed Burst Shooting Mode
4 JPEG format still pictures created 
from the motion picture
5 The DPOF setting files
6 The motion picture thumbnails
7 AVCHD format motion picture files 
([00000.MTS] etc.)
∫Copying your still pictures to 
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be 
copied to the PC with Explorer or other 
programs.
1 Double click the folder that contains 
the still pictures. ([DCIM]  # 
[100CDPFQ] etc.)
2 Drag and drop the still pictures onto  the destination folder (on the PC’s 
HDD).
≥Do not delete the SD card’s folders. Doing 
so may make the SD card unusable in this 
unit.
≥ When data not supported by this unit has 
been recorded on a PC, it will not be 
recognized by this unit.
≥ Always use this unit to format SD cards.
We recommend using HD Writer AE 3.0 
to copy or write back motion picture data.
Using Windows Explorer or other 
programs on the PC to copy, move or 
rename files and folders recorded with 
this unit will result in them being unusable 
with HD Writer AE 3.0.
DCIM
CAM_SD
100CDPFQ
101UCPBH


AVCHDTN
BDMV
AVCHD
MISC
P R I VAT E
102CDPFR
103CDPFS


\b
HDCSD800P-VQT3K35_mst.book  128 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							129VQT3K35
≥To use the software, log on as an Administrator or as user name for standard user account 
(only for Windows 7/Windows Vista).
The software cannot be used with the user name for a guest account.
(On the PC)
Select [Start]  # [All Programs]  # [Panasonic] # [HD Writer AE 3.0]  # 
[HD Writer AE].
≥ For details on how to use the software applications, read the PDF operating instructions of 
the software.
Reading the operating instructions of the software 
applications
≥You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the 
PDF operating instructions.
Select [Start]  # [All Programs]  # [Panasonic]  # [HD Writer AE 3.0]  # 
[Operating Instructions].
With a PC
Starting HD Writer AE 3.0
HDCSD800P-VQT3K35_mst.book  129 ページ  ２０１０年１２月２０日　月曜日　午前９時４分 
						

							130VQT3K35
≥HD Writer AE 3.0 is not available for Mac.
≥ iMovie’11 supported. For details about iMovie’11, please contact Apple Inc.
≥ 1080/60p scenes cannot be imported to a Mac.
≥ Since iMovie’11 is not compatible with 1080/60p, it cannot acquire the scenes recorded in 
1080/60p. Record in normal recording mode when importing to Mac.
≥ There are some limitations in the functions when iMovie’11 is used. Refer to page 140 for 
details.
∫ Operating environment
≥Even if the system  requirements mentioned in this owner’s manual are fulfilled, some PCs 
cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
≥ Supplied CD-ROM is available for Windows only.
∫ Copying still pictures on PC
1Connect this unit to a PC via the supplied USB cable.≥The USB function selection screen will appear.
2Touch [PC] on the screen of this unit.≥This unit is automatically recognized as an external drive of Mac.
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen 
to turn the LCD monitor on.
3Double-click [CAM_SD] displayed on the desktop.≥Files are stored in [100CDPFQ] or [102CDPFR] folder etc. in the [DCIM] folder.
4Using a drag-and-drop operation, move the pictures you want to 
acquire or the folder storing those pictures to any different folder on 
the PC.
∫ To disconnect USB cable safely
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
≥Do not remove the SD card from this unit when this unit is connected to the PC using a 
USB cable.
With a PC
If using Mac
PC Mac
OSMac OS X 10.6.3
CPUIntel Core Duo or better
RAM1 GB or more
InterfaceUSB port
HDCSD800P-VQT3K35_mst.book  130 ページ  ２０１０年１２月２０日　月曜日　午前９時４分