Panasonic Hdc Sd600p Operating Instructions

							81VQT2U72
A single frame from the recorded motion picture can be saved as a still picture.
Picture size of the still picture to be recorded is   (1920k1080).
1Pause at the scene you want to save as a still picture during 
playback.
≥ It is convenient to use slow-motion playback and frame-by-frame playback.
2Press the   button fully.
≥Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Playback 
operationPlayback displayOperating steps
Direct playback During Playback
1) Touch 
1 to display the direct 
playback bar  A.
2) Touch the direct playback bar.
≥ The playback is paused and the image 
is skipped until the position you 
touched.
≥ Playback starts again when you release 
the touch screen.
≥ Touch  2 to display the operation icon.
≥ Direct playback bar cannot be operated 
with the remote control.
Creating still picture from motion picture
2.1M
HDC-SD600-P-VQT2U72_mst.book  81 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							82VQT2U72
An image of one scene is displayed as a thumbnail at set search condition. Scene can be 
played back from any midway point of the scene you wish to see.
≥Operate the zoom lever or the adjust zoom buttons to   side and change over the 
thumbnail display to Highlight&Time frame index. ( l37)
1Touch selected search condition.≥Next (previous) scene can be displayed by touching 
/.
2Touch the desired search condition.[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/
[MINUTES]/[FACE]/[HIGHLIGHT]
≥ When you select [FACE], thumbnails for sections of the 
motion picture in which faces were recognized will be 
displayed.
≥ A portion judged to be clearly recorded will be detected and displayed in thumbnail if you 
select [HIGHLIGHT].
3(Only when [MINUTES] is selected)
Touch  /  to set the time.≥It can be set up to a maximum of 60 minutes.
≥ Touch [ENTER].
4Touch the thumbnail to be played back.≥Next (previous) thumbnail can be displayed by touching  / .
Playback of the first scene starts after playback of the last scene finishes.
The   indication appears on the full screen views.
≥ All the scenes are played back repeatedly. (Wh en playing back motion pictures by date, all 
the scenes on the selected date are played back repeatedly.)
Highlight&Time frame index
Repeat playback
: [VIDEO SETUP]  # [REPEAT PLAY]  # [ON]
A Selected search 
condition
B Scene selection
HDC-SD600-P-VQT2U72_mst.book  82 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							83VQT2U72
If playback of a scene was stopped halfway, the playback can be resumed from where it was 
stopped.
If playback of a motion picture is stopped,   appears on the thumbnail view of the stopped 
scene.
≥The memorized resume position is cleared if you turn off the unit or change the mode.
(The setting of [RESUME PLAY] does not change.)
You can zoom in by touching a still picture during playback.
1Touch the part you wish to zoom in on during still picture playback.≥ The still picture is zoomed in on, centering on the part you touched. With each touch, you 
zoom in further. ( k1 #  k2 # k 4)
2Move your position on the zoomed still 
picture by touching  3/4/2/1.
≥The location of the zoom displays for about 1 second when 
zooming in (zooming out) or moving the displayed location.
≥ The more picture is enlarged, the more its quality 
deteriorates.
Zooming out from the zoomed still picture
Touch   to zoom out. ( k4 #  k2 #  k1)
≥ Touch   to return to normal playback ( k1).
≥ You can also perform zoom operations using the zoom lever or the adjust zoom buttons.
Resuming the previous playback
: [VIDEO SETUP]  # [RESUME PLAY]  # [ON]
Zooming in on a still picture during playback (Playback 
zoom)
ADisplayed location of 
the zoom
HDC-SD600-P-VQT2U72_mst.book  83 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							84VQT2U72
Advanced
Playback 
(Advanced)
2
Various playback 
functions
The scenes or the still pictures recorded on the same day can be played back in succession.
1Touch the date select icon.
2Touch the playback date.The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3Touch the scene or the still picture to be played back.
≥Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode 
is changed.
≥ Even if scenes are recorded on the same day, they are grouped separately in the following 
cases. –1, –2... is added after the recording date displayed on the screen.
jWhen the number of scenes exceeds 99
j When the media is repaired
j When the Interval recording is used
≥ Even if still pictures are recorded on the same day, they are grouped separately in the 
following cases.
jWhen the number of still pictures exceeds 999
j When pictures are recorded in Hi-Speed Burst Shooting mode (  is indicated after the 
date in the list by date).
≥  is displayed after the date in  the list by date for the still pictures created from the motion 
picture. ( l81)
Playing back motion pictures/still pictures by date

A Date select icon
HDC-SD600-P-VQT2U72_mst.book  84 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							85VQT2U72
A part can be extracted and played back even when not set to normal playback.
1Touch .
2Touch the desired playback mode.
3Touch the desired item.
≥When [FACE HIGHLIGHT]/[HIGHLIGHT] is selected
* This appears only when [FACE HIGHLIGHT] is selected.
≥ When [INTEL. SCENE] is selected
4Touch [START].≥When Face Highlight Playback/Highlight Playback is selected, the playback time is 
displayed and playback is paused.
5Select the playback operation. ( l35, 80)≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
Face Highlight Playback/Highlight Playback/Intelligent 
Scene Selection
[FACE HIGHLIGHT]: Giving priority to the parts with detected faces, the part that was 
recognized as clearly recorded is extracted from a long 
recording, and it can be played back in a short time with music 
added.
[HIGHLIGHT]: Part that was recognized as clearly recorded is extracted from a 
long recording, and it can be played back in a short time with 
music added.
[INTEL. SCENE]: Scenes can be played back with music, excluding a portion of 
the scene judged to have failed to shoot due to fast movement 
of this unit, camera shake, or focus error.
[SCENE SETUP]:Select the scene or date to be played back. ( l86)
[PRIORITY SETUP]*:Select the person registered for face recognition to be played 
back. ( l86)
[PLAYBACK TIME]:Select the time to play back. ( l87)
[MUSIC SELECT]:Select the music to be played on playback. ( l87)
[DATE SETUP]:Select the date to be played back. ( l87)
[MUSIC SELECT]:Select the music to be played on playback. ( l87)
HDC-SD600-P-VQT2U72_mst.book  85 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							86VQT2U72
≥Playing back of all the scenes returns if the unit is turned off or the mode is changed.
(Highlight playback)
≥ Highlight playback cannot be performed wi th interval-recorded motion pictures. (l61)
(Intelligent scene selection)
≥ Up to 9 sections can be skipped for a single scene.
≥ When motion pictures are skipped, the image stops momentarily.
≥ Divided scene will not be skipped.
≥ For data that are edited with the editing function of HD Writer AE 2.1, the Intelligent scene 
selection is disabled.
∫ Scene setting
1 Touch [SELECT SCENES] or [SELECT DATE].
2 (When [SELECT SCENES] is selected)
Touch the scenes to be played back.
≥Up to 99 scenes can be selected in succession.
≥ When touched, the scene is selected and   is 
displayed. Touch the scene again to cancel the 
operation.
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded 
by red. Touch the date again to cancel the operation.
3 Touch [Enter]/[ENTER].
∫ Priority setting
1 Touch [SELECTED FACE].≥If you touch [NONE], any detected face, including the face of person registered for Face 
Recognition, is given priority on playback.
2 (When [SELECTED FACE] is selected)
Touch a face to specify.
≥You can specify up to 6 faces, which are to be played 
back in priority.
≥ When touched, the registered face is selected and 
surrounded by red. Touch the registered face again to 
cancel the operation.
≥ Touch [ENTER]. When a single face is specified, the name registered for that face is 
displayed. When multiple faces are specified, the number of faces is displayed.123
456
ANNA
KEN M
JESSICA CATHY JOE
HDC-SD600-P-VQT2U72_mst.book  86 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							87VQT2U72
∫Playback time setting
Touch the playback time to set.≥The playback time of [AUTO] is a maximum of 
approx. 5 minutes.
≥ Playback time may become shorter than the setting, 
or it may not even play back if the part recognized as 
clearly recorded is short.
∫ Date setting
Touch the playback date.
∫Music setting
1 Touch your favorite music.≥When [NO MUSIC] is selected, the audio recorded at 
the time of shooting is played back.
≥ To adjust the volume of music during playback or 
audio testing, operate the volume lever or the adjust 
zoom buttons. ( l37)
2 Touch [ENTER].
To test the music audio
Touch [START].
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
HDC-SD600-P-VQT2U72_mst.book  87 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							88VQT2U72
1Touch .
2Touch the desired item.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [MUSIC SELECT] is selected)
Touch the desired sound.≥To adjust the volume of music during 
playback of the slide show or audio testing, 
operate the volume lever or the adjust zoom 
buttons. ( l37)
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the playback operation. ( l35)≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
Changing the playback settings and playing back the 
slide show
[DATE SETUP]: Select the date to be played back.
[SLIDE INTERVAL]: Selects the interval between still pictures at playback.
[MUSIC SELECT]: Select the music to be played on playback.
[SHORT]: Approx. 1 second
[NORMAL]: Approx. 5 seconds
[LONG]: Approx. 15 seconds
HDC-SD600-P-VQT2U72_mst.book  88 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							89VQT2U72
Advanced
Editing
1
Deleting scenes/still 
pictures
¬Change the mode to  .
∫ Deleting multiple scenes/still pictures from the thumbnail display
1Press the   button while the thumbnail view screen is displayed.
2Touch [ALL SCENES] or [SELECT].
≥When [ALL SCENES] is selected, all the scenes or still 
pictures on the selected media will be deleted.
(In case of playing back scenes or still pictures by date, all the 
scenes or still pictures on the selected date will be deleted.)
≥ Protected scenes/still pictures cannot be deleted.
3(Only when [SELECT] is selected in step 2)
Touch the scene/still picture to be deleted.≥When touched, the scene/still picture is selected and the   indication appears on the 
thumbnail. Touch the scene/still pict ure again to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
4(Only when [SELECT] is selected in step 2)
Touch [Delete] or press the   button.≥To continuously delete other scenes/still pictures, repeat steps 3-4.
When you stop deleting halfwayTouch [CANCEL] or press the MENU button while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled 
cannot be restored.
To complete editingPress the MENU button.Deleted scenes/still pictures cannot be restored, so perform appropriate 
confirmation of the contents before proceeding with deletion.
0h00m00s 0h00m00s
0h00m00s
F
To delete by confirming images 
being played back
Press the   button while scenes or still 
pictures to be deleted are being played 
back.
HDC-SD600-P-VQT2U72_mst.book  89 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 
						

							90VQT2U72
≥You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ You can also delete still pictures by pressing the MENU button, selecting [PICT. SETUP]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ During Face Highlight Playback, Highlight Playback, Intelligent Scene Selection, or Disc 
Playback when connected to a DVD burner (optional), scenes/still pictures cannot be 
deleted.
≥ Scenes/still pictures which cannot be played back (the thumbnails are displayed as  ) 
cannot be deleted.
≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still 
pictures.
≥ If you delete scenes recorded on other products or still pictures conforming to DCF 
standard with this unit, all the data related to the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are deleted, a still picture 
(other than JPEG) that cannot be played back on this unit may be erased.
HDC-SD600-P-VQT2U72_mst.book  90 ページ  ２０１０年４月１４日　水曜日　午後３時２８分