Home > Panasonic > Camcorder > Panasonic Hdc Sd600p Operating Instructions

Panasonic Hdc Sd600p Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Hdc Sd600p Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							91VQT2U72
    To delete an unnecessary portion of a scene, first divide the scene and then delete the 
    unnecessary portion.
    ≥Change the mode to   and touch the Play mode select icon to select desired 
    media to divide a scene. ( l35)
    1Select the menu.
    2Touch the scene to be divided.
    3Touch   to set the dividing point.≥Using slow-motion playback or frame-by-frame playback 
    makes it easy to search for the point where you want to 
    divide the scene. ( l80)
    ≥ Touch [YES] to continue dividing the same scene. To 
    continue dividing other scenes, touch [NO] and repeat steps 
    2-3.
    4Press the MENU button to complete dividing.
    5Delete the unnecessary scene. (l 89)
    To delete all the divided points
    ≥The scenes that were deleted after division cannot be recovered.
    ≥You cannot divide a scene if you are playing back a disc with a DVD burner (optional) 
    connected, or if the number of scenes of a given date would exceed 99 scenes.
    ≥ It may not be possible to divide scenes with a short recording time.
    ≥ Data that has been recorded or edited on another device cannot be divided and the divided 
    points cannot be deleted.
    ≥ If personal information in the divided scenes is deleted, the personal information is deleted 
    when the divided scenes are canceled.
    Dividing a scene to partially delete
    : [EDIT SCENE]  # [DIVIDE] # [SET]
    [DIVIDE]  # [CANCEL ALL]
    0h00m00s0h00m00s0h00m00s
    HDC-SD600-P-VQT2U72_mst.book  91 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							92VQT2U72
    Deletes face recognition information from scenes in which faces were recognized.
    ≥Change the mode to  .
    1Select the menu.
    2Touch the desired scenes with personal information to be deleted.≥  appears at scenes for which faces were recognized. Touch one of the scenes where 
     appears.
    ≥  will change to   (red) when touched. Touch the   (red) again to cancel the 
    operation.
    ≥ Up to 99 scenes can be selected in succession.
    3Touch [Delete].≥To continuously delete other personal information, repeat steps 2-3.
    ≥ Press the MENU button to complete the settings.
    When you stop deleting halfwayTouch [CANCEL] or press the MENU button while deleting personal information.
    ≥The personal information that has already been deleted when the deletion is canceled 
    cannot be restored.
    ≥During Face Highlight Playback, Highlight Playback, Intelligent Scene Selection, or disc 
    playback when connected to a DVD burner (optional), scenes/still pictures cannot be 
    deleted.
    Scenes/still pictures can be  protected so that they are not deleted by mistake.
    (Even if you protect some scenes/still pictures, formatting the media will delete them.)
    ≥ Change the mode to  .
    1Select the menu.
    2Touch the scene/still picture to be protected.
    ≥When touched, the scene/still picture is selected and the   indication appears on the 
    thumbnail. Touch the scene/still pict ure again to cancel the operation.
    ≥ Press the MENU button to complete the settings.
    ≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/
    still pictures cannot be protected.
    Deleting personal information
    : [VIDEO SETUP]  # [DELETE PERSONAL INFO]
    Protecting scenes/still pictures
    : [VIDEO SETUP] or [PICT. SETUP]  # [SCENE PROTECT]
    HDC-SD600-P-VQT2U72_mst.book  92 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							93VQT2U72
    Advanced
    Editing
    2
    DPOF setting
    You can write the data selecting still pictures to be printed and the number of prints (DPOF 
    data) onto the SD card.
    ¬Change the mode to   and touch the play mode select icon to select 
    [PICTURE/SD CARD]. ( l35)
    ∫ What is DPOF?
    DPOF (Digital Print Order Format) is a format  which allows the user of a digital camera to 
    define which captured images on the SD card are to be printed, together with information on 
    the number of copies they wish to print. (Please note: Not all commercial printing services 
    support this feature at this time.)
    1Select the menu.
    2Touch the still picture to be set.
    3Touch  /  to set the number of 
    prints.
    ≥ Up to 999 prints can be selected. (Prints for set 
    number can be printed with a printer that supports 
    DPOF.)
    ≥ To cancel the setting, set the number of prints to [0].
    4Touch [ENTER].
    ≥To continuously set other still pictures, repeat steps 2-4.
    ≥ Press the MENU button to complete the settings.
    To cancel all DPOF settings
    ≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/
    still pictures cannot be set DPOF.
    ≥ You cannot add the recording date to pictures to be printed with the DPOF settings. : [PICT. SETUP] 
    # [DPOF SET]  # [SET]
    [DPOF SET]  # [CANCEL ALL]
    HDC-SD600-P-VQT2U72_mst.book  93 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							94VQT2U72
    Advanced
    With a TV
    1
    Watching Video/Pictures 
    on your TV
    ≥Use the supplied AV multi cable. Check the output settings when connecting the 
    component terminal or the video terminal with the AV multi cable. ( l97)
    ≥ Use of the following Panasonic HDMI mini cables is recommended to connect the unit to 
    the HDMI terminal.
    ≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high 
    definition TV and then play back the recorded high definition images, you can enjoy them 
    in high resolution with high quality sound.
    1Connect this unit to a TV.
    Confirm the terminals on your TV and use a cable compatible with the terminals. 
    Image quality may vary with the connected terminals.
    1 High quality
    2 HDMI terminal
    3 Component 
    terminal
    4 Video terminal
    AHDMI mini cable 
    (optional)
    ≥ Be sure to connect to the 
    HDMI terminal.
    B AV multi cable 
    (supplied)
    Picture quality
    1 High definition images 
    when connecting to 
    HDMI terminal
    2 High definition images 
    when connecting to 
    component terminal 
    compatible with 1080i
    Standard images 
    when connecting to 
    component terminal 
    compatible with 480i
    3 Standard images 
    when connecting to 
    video terminal
    HDC-SD600-P-VQT2U72_mst.book  94 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							95VQT2U72
    ≥Check that the plugs are inserted as far as they go.
    ≥ Always use a genuine Panasonic HDMI mini  cable (RP-CDHM15, RP-CDHM30; optional).
    ≥ Do not use any other AV multi cables except the supplied one.
    ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable 
    is not required.
    ≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug 
    of the AV multi cable. Image may not display when the component terminal plug is 
    connected simultaneously.
    2Select the video input on the TV.≥Example:
    Select the [HDMI] channel with a HDMI mini cable.
    Select the [Component] or [Video 2] channel with an AV multi cable.
    (The name of the channel may differ depending on the connected TV.)
    ≥ Check the input setting (input switch) and the audio input setting on the TV. (For more 
    information, please read the operating instructions for the TV.)
    3Change the mode to   to play back.
    CablesReference items
    A HDMI mini cable (optional) ≥Connecting with a HDMI mini cable ( l97)
    ≥ Playback using VIERA Link
    ™ (HDAVI Control™) 
    ( l 98)
    B AV multi cable (supplied) ≥Connecting with the AV multi cable ( l97)
    HDC-SD600-P-VQT2U72_mst.book  95 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							96VQT2U72
    ∫To watch images on a regular 
    TV (4:3) or when both sides of 
    the images do not appear on 
    the screen
    Change the menu setting to display the 
    images correctly. (Check the TV setting.)
    Example of images with a 16:9 aspect 
    ratio on a regular TV (4:3)
    ≥If a wide-screen TV is connected, adjust 
    the aspect setting on the TV. (Refer to the 
    operating instructions of the TV for 
    details.)
    ∫ To display the on-screen 
    information on the TV
    When the EXT DISPLAY button on the 
    remote control is pressed, the information 
    displayed on the screen (operation icon and 
    time code etc.) can be displayed/not 
    displayed on the TV.
    ≥
    It will not display when the unit is turned off.
    ≥When the AV multi cable is connected to 
    this unit, the setup screen of the AV multi 
    destination is displayed on the screen of 
    this unit. Touch either [COMPONENT] or 
    [AV OUT] in accordance with the terminal 
    connecting to the TV. ( l97)
    ≥ If the HDMI mini cable and AV multi cable 
    are connected at the same time, output 
    will be prioritized in order of the HDMI mini 
    cable, AV multi cable.
    : [SETUP] 
    # [TV ASPECT]  # 
    [4:3]
    [TV ASPECT] setting
    [16:9][4:3]
    SEARCH
    STILL ADV STILL ADV SEARCH
    /VOL
    DATE/TIMESTOPEXT DISPLAYPLAY
    STOP
    SKIP SKIP
    PAUSE
    Refer to the following support site for information about Panasonic TVs with an SD 
    card slot for playing back your pictures.
    http://panasonic.net/
    ≥
    It may not be possible to play back scenes on the TV depending on the recording mode.
    ≥ For details on how to play back, please read the operating instructions for the TV.
    HDC-SD600-P-VQT2U72_mst.book  96 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							97VQT2U72
    Select the desired method of HDMI output.
    ≥[AUTO] determines the output resolution automatically based on information from the 
    connected TV.
    If the images are not output on the TV when the setting is [AUTO], switch to the method 
    [1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please 
    read the operating instructions for the TV.)
    ≥ Image will not display on TV for a few seconds in the following cases.
    jWhen the 1080/60p recording mode is turned  on/off during Motion Picture Recording 
    Mode
    j When [SELECT VIDEO] is touched during Motion Picture Playback Mode
    AV multi connector output setting can be changed.
    Changing the component output setting
    Connecting with a HDMI mini cable
    : [SETUP]  # [HDMI RESOLUTION]  # [AUTO]/[1080p]/[1080i]/[480p]
    Connecting with the AV multi cable
    : [SETUP] # [AV MULTI]  # desired setting
    [COMPONENT]:When connecting to the component terminal
    [AV OUT]:When connecting to the video terminal
    : [SETUP]  # [COMPONENT OUT]  # desired setting
    [480i]:When connecting to the component terminal on the TV compatible with 480i. 
    (Playback is in standard quality.)
    [1080i]:When connecting to the component terminal on the TV compatible with 
    1080i. (Playback is in high definition quality.)
    HDC-SD600-P-VQT2U72_mst.book  97 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							98VQT2U72
    Advanced
    With a TV
    2
    Playback using VIERA Link™ 
    (HDAVI Control
    ™)
    ¬ Change the mode to  .
    1Select the menu.
    ≥If you are not using VIERA Link, set to [OFF].
    2Connect this unit to a Panasonic TV compatible with VIERA Link 
    with a HDMI mini cable.
    A HDMI mini cable (optional)
    B Panasonic TV compatible with VIERA Link
    ≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there 
    are 2 or more HDMI input terminals on the TV.
    ≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the 
    TV for how to set etc.)
    ≥ Always use a genuine Panasonic HDMI mini  cable (RP-CDHM15, RP-CDHM30; optional).
    What is the VIERA Link?
    ≥
    VIERA Link
    ™ is a new name for EZ Sync™.
    ≥ This function allows you to use your remote control for the Panasonic TV for easy 
    operations when this unit has been connected to a VIERA Link compatible device using 
    a HDMI mini cable (optional) for automatic linked operations. (Not all operations are 
    possible.)
    ≥ VIERA Link is a unique Panasonic function built on a HDMI control function using the 
    standard HDMI CEC (Consumer Electronics Control) specification. Linked operations 
    with HDMI CEC compatible devices made by other companies are not guaranteed. 
    When using devices made by other companies that are compatible with VIERA Link, 
    refer to the operating instructions for the respective devices.
    ≥ This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is the newest 
    Panasonic version and is also compatible with existing Panasonic VIERA Link devices. 
    (As of Dec 2009)
    : [SETUP]  # [VIERA Link]  # [ON]
    HDMI IN
    
    
    HDC-SD600-P-VQT2U72_mst.book  98 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							99VQT2U72
    3Operate with the remote control for the TV.
    1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the center to set it.
    2) Activate the operation icons that are displayed on TV screen with the remote control for 
    the TV.
    A Operation icons
    B Display operation icons
    C Cancel operation icons
    D Display/Cancel operation icons
    ≥ The following operations are available by pressing the color buttons on the remote control.
    jGreen: Switching the number of scenes/still pictures in thumbnail display 
    (9 thumbnails  # 20 thumbnails  # 9 thumbnails...)
    Zoom in on still picture
    j Yellow: Deleting scenes/still pictures
    j Red: Zoom out from still picture
    ∫ Other linked operations
    Turning the unit off:
    If you use the remote control for the TV to turn off the power, this unit also turns off.
    Automatic input switching:
    If you connect with a HDMI mini cable and then turn on this unit, the input channel on the TV 
    automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn 
    on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
    ≥Depending on the HDMI terminal on the TV , the input channel may not switch 
    automatically. In this case, use the remote control for the TV to switch the input channel.
    ≥ If you are unsure whether or not the TV and AV amplifier you are using are compatible with 
    VIERA Link, read the operating instructions for the devices.
    ≥ Available linked operations between this unit an d a Panasonic TV is different depending on 
    the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the 
    operating instructions of the TV for the operations that support on the TV.
    ≥ Operation is not possible with a cable that is not based on the HDMI standard.
    
    
    1)
    2)
    
    HDC-SD600-P-VQT2U72_mst.book  99 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    							100VQT2U72
    Copy/Dubbing
    With this unit/other 
    products
    1
    Connecting a DVD burner to copy 
    to/play back a disc
    Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by 
    connecting a DVD burner (optional) to this unit using a Mini AB USB Connection Cable 
    (supplied with DVD burner). The copied DVD disc can also be played back.
    ≥ Please read the operating instructions of the DVD burner for how to use it.
    ∫ About discs that can be used for copying
    *1 Use a new disc. You can additionally copy only to a DVD-RAM. When you copy to 
    DVD-RW, DVD-R, DVD-R DL, +RW, +R or +R DL , the disc is automatically finalized to 
    allow playback on other devices and additional copying will not be possible.
    *2 Only DVD-RAM copied with the DVD burner or HD Writer AE 2.1 can additionally copy.
    *3 Connect this unit and a DVD burner before formatting. If you format a used disc, you can  copy on that disc. Please be aware that if a disc is formatted, then all the data recorded 
    on the disc will be erased. (l 106)
    *4 Only VW-BN2 can be used for +RW, +R, and +R DL.
    ≥ We recommend using the discs that have been recommended in the operating instructions 
    of the DVD burner. Refer to the operating instructions of the DVD burner for details about 
    recommended discs, disc handling etc.
    Preparing for copying/playing back
    We recommend using Panasonic DVD burner VW-BN1/VW-BN2.
    Disc type
    DVD-RAM DVD-RW /
    +RW *4
    DVD-R /
    DVD-R DL  / +R 
    *4/
    +R DL *4
    Copy*1≤≤≤
    Additional copy*2≤ ——
    Format*3≤≤—
    HDC-SD600-P-VQT2U72_mst.book  100 ページ  2010年4月14日 水曜日 午後3時28分 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Hdc Sd600p Operating Instructions