Panasonic Hdc Sd100 Operating Instructions

							11VQT1T64
Features
∫Very clear high definition pictures
This unit can record detailed high definition images to an SD card.
High definition images (1920k1080)
*
ANumber of available scan lines 1080Standard images (720k480)
BNumber of available scan lines 480
High definition images
≥High definition images have more than approximately 2 times the number of available scan lines and 
approximately 6 times* the number of pixels compared with standard images.
≥The still pictures above are images for explanation purposes.
* If the recording mode is HA/HG/HX.
What is AVCHD?
This is a format for recording and playing back highly detailed high definition images.
Images are recorded based on the MPEG-4 AVC/H.264 codec for compressing images and audio is 
recorded with the Dolby Digital 5.1 Creator.
≥Since the recording method is different from an ordinary DVD video etc., the data is not compatible.
∫Compatibility with other products

With other productsAvailable functionPicture quality
Watching Video/
Pictures on your TV
(l88 to 94)Playback with the HDMI mini cable
jPlayback using VIERA Link™ (HDAVI Control™) 
(l93)High definition 
images
Playback with the component cable [1080i]
Playback with the component cable [480i] Standard images
Playback with the AV cable
Using a DVD burner 
(l96 to 103)Connecting a DVD burner to copy to/play back a 
disc
jPlaying back the copied disc (l102)High definition 
images
What you can do with a 
PC
(l108 to 109)Copying data to a PC and easy editing
Writing data to DVD discs and SD cards
Converting the motion picture data to MPEG2 Standard images
Creating a DVD Video disc
Dubbing images onto 
other video device
(l104)Dubbing images when connecting with the AV cable
HDCSD100P-VQT1T64_ENG.book  11 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							12VQT1T64
Quick Guide
∫Charging the battery
1) Connect the AC cable to the AC adaptor and 
the AC outlet.
2) Insert the battery into the battery charger by 
aligning the arrows.
∫Inserting the battery
Install the battery by inserting it in the direction 
shown in the figure.
AInsert the battery until it clicks and locks.
∫How to turn on the power
Turn on the power by turning the mode dial to 
 or   while pressing the lock release 
button A.
≥Rotate the mode dial while at the same time 
pressing in the lock release button if changing 
from OFF to another mode.
≥Status indicator B
≥Align with the mark C.
≥To turn off the power, set the mode dial to OFF.
∫Inserting/removing an SD card
1) Open the LCD monitor.
≥Check that the card access lamp has gone off.
2) Open the SD card cover by sliding the OPEN 
lever B.
3) Insert/remove the SD card.
≥When inserting an SD card, face the label side 
C in the direction shown in the illustration and 
press it straight in as far as it will go.
≥When removing the SD card, press the center 
of the SD card and then pull it straight out.
4) Securely close the SD card cover.
≥Securely close it until it clicks.
Charging lamp 
[CHARGE]A
Lights up:
Charging
Goes off:
Charging 
completed
Card access lamp [ACCESS] A
≥When this unit is accessing the card, the 
access lamp lights up.
HDCSD100P-VQT1T64_ENG.book  12 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							13VQT1T64
∫Language selection
1) Press the MENU button, then select 
[LANGUAGE] and press the cursor button.
2) Select [English] and press the cursor button.
∫Help mode
The help mode explains the operation icons 
displayed. (Except headphone volume 
adjustment)
≥Rotate the mode dial to select  .
1) Press the cursor button to display the icon.
2) Move the cursor button right to select [ ].
3) Move the cursor button up, left or right to 
select the desired icon.
≥An explanation of the selected icon scrolls at 
the bottom of the screen.
≥The indication changes each time the cursor 
button is moved down.
≥When the help mode is used, functions cannot 
be set.
To exit the Help mode
Press the MENU button or select [END].
∫Recording motion pictures
1) Rotate the mode dial to select   .
2) Set the LCD/EVF select switch to LCD or 
EVF.
≥Open the LCD monitor when it is set to LCD.
3) Press the recording start/stop button to start 
recording.
∫Recording still pictures
1) Rotate the mode dial to select   .
2) Set the LCD/EVF select switch to LCD or 
EVF.
≥Open the LCD monitor when it is set to LCD.
3) Press the   button fully to take the picture.
0h00m00s0
h0
0m
00
s0h00m00sR1h20mR
1h
2
0mR1h20mHG
HDCSD100P-VQT1T64_ENG.book  13 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							14VQT1T64
∫Motion picture playback
1) Rotate the mode dial to select  .
2) Select [ ] (motion picture playback) A 
with the cursor button.
3) Select the scene to be played back and 
press the cursor button.
4) Select the playback operation with the cursor 
button.
1/;: Playback/Pause
6: Rewind playback
5: Fast forward playback
∫: Stops the playback and shows the 
thumbnails.
∫Still picture playback
1) Rotate the mode dial to select  .
2) Select [ ] (still picture playback) A with 
the cursor button.
3) Select the still picture to be played back and 
press the cursor button.
4) Select the playback operation with the cursor 
button.
1/;: Slide show (playback of the still pictures 
in numerical order) start/pause.
2;: Plays back the previous picture.
;1: Plays back the next picture.
∫: Stops the playback and shows the 
thumbnails.
HDCSD100P-VQT1T64_ENG.book  14 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							15VQT1T64
Preparation
Recording
Playback
Backup
With a PC
Others
16Before using
22Setup
HDCSD100P-VQT1T64_ENG.book  15 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							16VQT1T64
Before using
1
Parts identification and 
handling
1 LCD monitor open
2 LCD monitor (l35)
Pull the LCD monitor out in the direction of the 
arrow with your fingers.
≥It can open up to 90o.
≥It can rotate up to 180o A towards the lens or 
90o B towards the viewfinder.3 Speaker
4 Optical image stabilizer button [ , 
O.I.S.] (l50)
5 Delete button [ ] (l82)
6 Cursor button
Use the cursor button to select the recording 
functions and playback operations, and to 
operate the menu screen.
1Select by moving up, down, left, right.
2Set by pressing the center.
≥Menu screen operations (l29)
≥To select the recording functions (l52 ,58)
≥Playback operations (l74)
AV /
2
345
67
8
9
10
11
1
12
13 14 16
17
18 1920
15
Due to limitations in LCD production 
technology, there may be some tiny bright or 
dark spots on the LCD monitor screen. 
However, this is not a malfunction and does 
not affect the recorded picture.
HDCSD100P-VQT1T64_ENG.book  16 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							17VQT1T64
7 Intelligent auto button [iA] (l51)
8 PRE-REC button [PRE-REC] (l45)
9 Menu button [MENU] (l29)
10 Battery holder (l23)
11 DC input terminal [DC IN] (l25)
12 USB terminal [ ] (l96, 105, 115)
13 HDMI mini connector [HDMI] (l88, 93)
14 Audio-video/headphone output terminal 
[AV/ ] (l31, 56, 88, 104)
≥Use the AV cable (only the supplied cable) or 
headphones.
≥Setup the [AV JACK] in the menu when the 
headphones are used. (l31)
15 Component terminal [COMPONENT] 
(l88)
16 Card access lamp [ACCESS] (l27)
17 Card slot (l27)
18 SD card cover (l27)
19 SD card open lever [OPEN] (l27)
20 Disc copy button [DISC COPY] (l98, 
101)
21 Lens cover
≥The lens cover opens in 
 recording mode. 
(l28)
22 Multi manual ring (l69)
23 Mode select switch [AUTO, MANUAL, 
FOCUS/ZOOM] (l39, 64, 69)
24 Camera function button [CAM FUNC] 
(l69)
25 Remote control sensor (l21)
26 Recording lamp (l30)27 Built-in flash (l61)
28 Lens (LEICA DICOMAR)
29 Lens hood
Rotate the lens hood counter-clockwise A to 
remove it. In order to attach it, place into slot B, 
and then rotate it clockwise C.
≥
When fitting the tele conversion lens (VW-T3714H; 
optional) or the wide conversion lens (VW-W3707H; 
optional), first remove the lens hood.
30 Microphone terminal [MIC]
≥A compatible plug-in powered microphone can 
be used as an external microphone.
≥Audio will be stereo (2 ch) with the external 
microphone input.
≥
Make sure that the microphone cable is out of the way 
from the lens so it will not be recorded in the images.
≥When the unit is connected with the AC adaptor, 
sometimes noise may be heard depending on the 
microphone type. In this case, please switch to the 
battery for the power supply and the noise will stop.
21
22
23
24
25
26
Be careful about the following.When 2 lens accessories, such as the ND filter 
and tele conversion lens, are fitted and the zoom 
lever is pressed toward the W side, the 4 corners 
of an image will be darkened. (Vignetting)
(When fitting 2 lens accessories, first remove 
the lens hood and then fit them.)
2728
29
MIC30
HDCSD100P-VQT1T64_ENG.book  17 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							18VQT1T64
31 Mode dial (l28)
32 Recording start/stop button (l41)
33 Status indicator (l28)
34 LCD/EVF select switch [EVF/LCD] (l35)
35 Viewfinder (l35)
36 Eyepiece corrector dial (l36)
37 Photoshot button [ ] (l46)
38 Zoom lever [W/T] (In recording mode) 
(l49)
Volume lever [sVOLr] (In playback 
mode) (l75)39 Accessory shoe
≥The video DC light/VW-LDC103PP (optional) 
should be mounted here.
40 Internal microphones (5.1 channel 
support)
31 323334 35
36
37
3839
40
41
42
Due to limitations in LCD production 
technology, there may be some tiny bright or 
dark spots on the viewfinder screen. However, 
this is not a malfunction and does not affect 
the recorded picture.
HDCSD100P-VQT1T64_ENG.book  18 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							19VQT1T64
41 Grip belt
Adjust the length of the grip belt so that it fits your 
hand.
1Flip the belt.
2Adjust the length.
3Replace the belt.
42 Shoulder strap fixture
43 Battery release lever [BATTERY] (l23)
44 Tripod receptacle
This is a hole for attaching the unit to the optional 
tripod. (For details on mounting the tripod, refer 
to the operating instructions for the tripod.)
ACamera base
4344
HDCSD100P-VQT1T64_ENG.book  19 ページ  ２００８年７月１４日　月曜日　午後８時２分 
						

							20VQT1T64
1 Photoshot button [ , PHOTO SHOT]*
2 On-screen display button [EXT DISPLAY] 
(l90)
3 Date/time button [DATE/TIME] (l33)
4 Playback operation buttons (l75)
5 Delete button [ ]
*
6 Direction buttons [3,4,2,1]
These buttons operate similar to how the cursor 
button moves up/down/right/left on the unit.
7 Recording start/stop button [START/
STOP]
*
8 Zoom/volume buttons [ZOOM, VOL]*
9 Menu button [MENU]*
10 Enter button [ENTER]
This button operates similar to pressing the 
cursor button on the unit.
* means that these buttons function in the same 
manner as the corresponding buttons on the 
unit.
Remote control
CAUTION
Danger of explosion if battery is incorrectly 
replaced. Replace only with the same or 
equivalent type recommended by the 
manufacturer. Dispose of used batteries 
according to the manufacturer’s instructions.
ZOOM START/
STOP PHOTO
SHOT EXT
DISPLAY
DATE/
TIME
VOL
PLAY
STOP SKIP SKIP
MENU
ENTER
PA U S E
SEARCH
STILL ADV STILL ADVSEARCH
1
2
3
4
6 57
8
9
10
Install a button-type battery (supplied)
1 While pressing 
the stopper A, 
pull out the 
battery holder.
2 Set the button-
type battery 
with its (i) mark 
facing upward 
and then put the 
battery holder 
back in place.
≥When the button-type battery runs down, 
replace it with a new battery (part number: 
CR2025). The battery should normally last 
about 1 year, however this depends on how 
frequently the unit is used.
≥Keep the button-type battery out of reach of 
children to prevent swallowing.
Replace battery with Panasonic PART NO. 
CR2025 only. Use of another battery may 
present a risk of fire or explosion.
Caution: Battery may explode if mistreated.
Dispose of used battery promptly. Keep away 
from children.
Do not recharge, disassemble or dispose of in 
fire.
HDCSD100P-VQT1T64_ENG.book  20 ページ  ２００８年７月１４日　月曜日　午後８時２分