Panasonic Hdc Dx1 Operating Instructions
Here you can view all the pages of manual Panasonic Hdc Dx1 Operating Instructions. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81LSQT1093
Editing
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥Scenes which cannot be played back (the
thumbnails are displayed as [ ]) cannot be
deleted.
≥Protected scenes cannot be deleted.
≥In case of [ALL SCENES], the deletion may
take time if there are...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-80.png "Page 81
81LSQT1093
Editing
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥Scenes which cannot be played back (the
thumbnails are displayed as [ ]) cannot be
deleted.
≥Protected scenes cannot be deleted.
≥In case of [ALL SCENES], the deletion may
take time if there are...")
81LSQT1093 Editing 4(Only when [SELECT] is selected in step 2) Press the button. 5When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-5. To complete editing Press the MENU button. ≥Scenes which cannot be played back (the thumbnails are displayed as [ ]) cannot be deleted. ≥Protected scenes cannot be deleted. ≥In case of [ALL SCENES], the deletion may take time if there are...
Page 82
![Page 82
82LSQT1093
Editing
Editing still pictures
(SD)
The deleted files cannot be restored.
¬
Rotate the mode dial to select
and then select the [ ] (still picture
playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the [ ] (still picture
playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-81.png "Page 82
82LSQT1093
Editing
Editing still pictures
(SD)
The deleted files cannot be restored.
¬
Rotate the mode dial to select
and then select the [ ] (still picture
playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the [ ] (still picture
playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select...")
82LSQT1093 Editing Editing still pictures (SD) The deleted files cannot be restored. ¬ Rotate the mode dial to select and then select the [ ] (still picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the cursor button. ¬Rotate the mode dial to select and then select the [ ] (still picture playback) tab. 1Press the button while the thumbnail view screen is displayed. 2Move the cursor button up or down to select...
Page 83
![Page 83
83LSQT1093
Editing
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ªDeleting still picture files
recorded on an SD card by other
products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥Protected scenes cannot be deleted.
≥In case of [ALL SCENES], the deletion may
take time if there...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-82.png "Page 83
83LSQT1093
Editing
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ªDeleting still picture files
recorded on an SD card by other
products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥Protected scenes cannot be deleted.
≥In case of [ALL SCENES], the deletion may
take time if there...")
83LSQT1093 Editing 5When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button. ªDeleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased. ≥Protected scenes cannot be deleted. ≥In case of [ALL SCENES], the deletion may take time if there...
Page 84
![Page 84
84LSQT1093
Editing
(SD)
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬
Rotate the mode dial to select
and then select the [ ] (still picture
playback) tab.
1Press the MENU button, then
select [PLAY SETUP]
#
[DPOF SET] # [SET] and press
the cursor button.
2Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3Move the cursor button up or
down to...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-83.png "Page 84
84LSQT1093
Editing
(SD)
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬
Rotate the mode dial to select
and then select the [ ] (still picture
playback) tab.
1Press the MENU button, then
select [PLAY SETUP]
#
[DPOF SET] # [SET] and press
the cursor button.
2Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3Move the cursor button up or
down to...")
84LSQT1093 Editing (SD) You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the [ ] (still picture playback) tab. 1Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the cursor button. 2Select the file to be set and then press the center of the cursor button. The number of prints set to be in DPOF is displayed. 3Move the cursor button up or down to...
Page 85
![Page 85
85LSQT1093
Disc and card management
Disc and card
management
Formatting
(RAM) (-RW)
Please be aware that if a disc is formatted,
then all the data recorded on the disc will be
erased.
¬
Rotate the mode dial to select or
rotate the mode dial to and then
select the [ ] (motion picture
playback) tab.
1Press the MENU button, then
select [SETUP]
#
[FORMAT DISC] # [YES] and
press the cursor button.
2When the confirmation message
appears, select [YES], then press
the cursor button.
≥When...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-84.png "Page 85
85LSQT1093
Disc and card management
Disc and card
management
Formatting
(RAM) (-RW)
Please be aware that if a disc is formatted,
then all the data recorded on the disc will be
erased.
¬
Rotate the mode dial to select or
rotate the mode dial to and then
select the [ ] (motion picture
playback) tab.
1Press the MENU button, then
select [SETUP]
#
[FORMAT DISC] # [YES] and
press the cursor button.
2When the confirmation message
appears, select [YES], then press
the cursor button.
≥When...")
85LSQT1093 Disc and card management Disc and card management Formatting (RAM) (-RW) Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. ¬ Rotate the mode dial to select or rotate the mode dial to and then select the [ ] (motion picture playback) tab. 1Press the MENU button, then select [SETUP] # [FORMAT DISC] # [YES] and press the cursor button. 2When the confirmation message appears, select [YES], then press the cursor button. ≥When...
Page 86
![Page 86
86LSQT1093
Disc and card management
Finalizing a disc
(-RW) (-R) (-R\DL)
If you insert a DVD-RW, DVD-R or DVD-R DL
disc recorded in this unit (that has not been
finalized) into another device such as DVD
recorder, computer, etc., the disc may
become unusable.
Be sure to finalize the disc on this unit before
inserting it in other devices.
¬
Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Connect this unit to the AC
adaptor.
≥Finalization cannot be executed...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-85.png "Page 86
86LSQT1093
Disc and card management
Finalizing a disc
(-RW) (-R) (-R\DL)
If you insert a DVD-RW, DVD-R or DVD-R DL
disc recorded in this unit (that has not been
finalized) into another device such as DVD
recorder, computer, etc., the disc may
become unusable.
Be sure to finalize the disc on this unit before
inserting it in other devices.
¬
Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Connect this unit to the AC
adaptor.
≥Finalization cannot be executed...")
86LSQT1093 Disc and card management Finalizing a disc (-RW) (-R) (-R\DL) If you insert a DVD-RW, DVD-R or DVD-R DL disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc., the disc may become unusable. Be sure to finalize the disc on this unit before inserting it in other devices. ¬ Rotate the mode dial to select and then select the [ ] (motion picture playback) tab. 1Connect this unit to the AC adaptor. ≥Finalization cannot be executed...
Page 87
![Page 87
87LSQT1093
Disc and card management
(-RW)
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Press the MENU button, then
select [SETUP]
# [UN-FINALIZE]
# [YES] and press the cursor
button.
2When the confirmation message
appears, select [YES], then press
the cursor button.
≥When un-finalizing is complete, press the
MENU button to exit the message screen.
≥Discs other than DVD-RW cannot be
un-finalized. If there is no space remaining on
the DVD-RW, the disc...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-86.png "Page 87
87LSQT1093
Disc and card management
(-RW)
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Press the MENU button, then
select [SETUP]
# [UN-FINALIZE]
# [YES] and press the cursor
button.
2When the confirmation message
appears, select [YES], then press
the cursor button.
≥When un-finalizing is complete, press the
MENU button to exit the message screen.
≥Discs other than DVD-RW cannot be
un-finalized. If there is no space remaining on
the DVD-RW, the disc...")
87LSQT1093 Disc and card management (-RW) ¬Rotate the mode dial to select and then select the [ ] (motion picture playback) tab. 1Press the MENU button, then select [SETUP] # [UN-FINALIZE] # [YES] and press the cursor button. 2When the confirmation message appears, select [YES], then press the cursor button. ≥When un-finalizing is complete, press the MENU button to exit the message screen. ≥Discs other than DVD-RW cannot be un-finalized. If there is no space remaining on the DVD-RW, the disc...
Page 88
Disc and card management 88LSQT1093 Protecting a disc (RAM) (-RW) This is for protecting discs (write protection) when they are being ejected from this unit to prevent them from being formatted if they are inserted in other devices. Discs protected using this unit cannot be edited or used to record on other devices, but they can be used in the same way as unprotected discs with this unit. Auto Protect Operation ≥After disc writing operations (recording motion pictures, editing, finalizing,...
Page 89
![Page 89
89LSQT1093
Disc and card management
¬Rotate the mode dial to select or
rotate the mode dial to and then
select the [ ] (motion picture
playback) tab.
1Press the MENU button, then
select [SETUP]
#
[AUTO PROTECT] # [ON] and
press the cursor button.
≥This function’s default setting is [ON].
≥We recommend that the auto protect
function is set to [ON] in order to prevent
accidental deletion on other devices. If
discs recorded on this unit are inserted into
other devices without protecting them,...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-88.png "Page 89
89LSQT1093
Disc and card management
¬Rotate the mode dial to select or
rotate the mode dial to and then
select the [ ] (motion picture
playback) tab.
1Press the MENU button, then
select [SETUP]
#
[AUTO PROTECT] # [ON] and
press the cursor button.
≥This function’s default setting is [ON].
≥We recommend that the auto protect
function is set to [ON] in order to prevent
accidental deletion on other devices. If
discs recorded on this unit are inserted into
other devices without protecting them,...")
89LSQT1093 Disc and card management ¬Rotate the mode dial to select or rotate the mode dial to and then select the [ ] (motion picture playback) tab. 1Press the MENU button, then select [SETUP] # [AUTO PROTECT] # [ON] and press the cursor button. ≥This function’s default setting is [ON]. ≥We recommend that the auto protect function is set to [ON] in order to prevent accidental deletion on other devices. If discs recorded on this unit are inserted into other devices without protecting them,...
Page 90
90LSQT1093 With other products With other products With a TV (RAM) (-RW) (-R) (-R\DL) (SD) The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals. When connecting to a HDMI terminal, a connection cable (optional) is necessary. ¬ Difference in picture quality depending on the terminal used for connection AHigh quality BStandard quality CHDMI terminal DComponent terminal EVideo terminal ≥Do not use...