Panasonic Hdc Dx1 Operating Instructions

101LSQT1093
With other products
6Select the paper size setting on 
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4k5 INCH]: L size
[5k7 INCH]: 2L size
[4k6 INCH]: Postcard size
[A4]: A4 size
≥You cannot set paper sizes not supported on 
the printer.
7Select the layout setting on 
[PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[ ]: No frame print
[]: Frame print
≥You cannot set page layouts not supported on 
the printer.
8Select [PRINT] # [YES] and press 
the cursor button to print...

With a computer
102LSQT1093
With a computer
Before using with a computer
ªWhen using still pictures recorded on this unit with a computer.
≥When 2 or more USB devices are connected to a computer, or when devices are connected through 
USB hubs or by using extension cables, proper operation is not guaranteed.
≥Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any 
other USB cables.)
≥Even if the system requirements mentioned in these operating instructions are...

103LSQT1093
With a computer
Connection and recognition
≥If the recognition procedure is not 
accomplished properly, operation will not be 
possible after connecting the unit to the 
computer.
≥If the unit fails to operate normally it may mean 
that the correction procedure was not 
conducted properly.
1Connect this unit to the AC 
adaptor.
≥If a battery is used, operation is not 
possible when this unit is connected to a 
computer.
2Insert an SD card with recorded 
images in this unit and then set 
the...

104LSQT1093
With a computer
When the unit is connected to a computer, it is 
recognized as an external drive.
≥[Removable Disk] is displayed in 
[My Computer].
Example folder structure of an SD card:
≥JPEG format still pictures (IMGA0001.JPG 
etc.) are stored in the [100CDPFP] folder. 
These can be opened with picture software that 
supports JPEG pictures.
≥Up to 999 files can be recorded in the 
[100CDPFP] or other such folder.
≥The DPOF setting files are recorded in the 
[MISC] folder.
ªDisk drive...

105LSQT1093
With a computer
1Double click the   icon in task 
tray displayed on the computer.
≥Hardware disconnect dialogue appears.
≥Depending on your computer’s settings, 
this icon may not be displayed.
2Select [USB Mass Storage 
Device] and click [Stop].
≥Verify [MATSHITA HDC-DX1 USB Device] 
is selected and click [OK].
3Select [USB Mass Storage 
Device] and click [Stop].
≥Verify [MATSHITA DVD-RAM LMXK1987 
USB Device] is selected and click [OK].
≥Click [Close], and you can safely 
disconnect the USB...

106LSQT1093
With a computer
To verify this unit is correctly recognized by the 
computer, rotate the mode dial on this unit to 
select PC connection mode, then connect the 
unit to the computer with a USB cable and follow 
the steps below.
≥With some computers including those made by 
NEC, the Device Manager may not be 
displayed if a mode that places restrictions on 
the functions has been established. Consult the 
manufacturer or follow the steps in your 
computer’s operating instructions to establish...

With a computer
107LSQT1093
If using a Macintosh
≥Even if the system requirements mentioned in these operating instructions are fulfilled, some personal 
computers cannot be used.
≥Apple, Mac OS is either registered trademarks or trademarks of Apple Computer, Inc. in the United 
States and/or other countries.
≥PowerPC is a trademark of International Business Machines Corporation.
≥Intel
® CoreTM Solo and Intel® CoreTM Duo are either registered trademarks or trademarks of Intel 
Corporation in the United...

108LSQT1093
Others
Others
Menus and Indications
Recording menus
ª[BASIC]
[SCENE MODE] (l69)
[D.ZOOM] (l58)
[O.I.S.] (l65)
[GUIDE LINES] (l66)
[CLOCK SET] (l45)
ª[VIDEO]
[REC MODE] (l52)
[FADE COLOR] (l60)
[WIND CUT] (l66)
[ZOOM MIC] (l58)
[MIC LEVEL] (l67)
[AGS] (l49)
ª[PICTURE]
[PICT. QUALITY] (l56)
[FLASH LEVEL] (l65)
[SHTR EFFECT] (l55)
ª[ADVANCED]
[REC LAMP] (l110)
[ZEBRA] (l68)
[COLOR BAR] (l69)
[MF ASSIST] (l70)
ª[SETUP]
[FORMAT DISC] (l85)
[AUTO PROTECT] (l88)
[FORMAT CARD] (l85)
[DISPLAY] (l110)...

109LSQT1093
Others
Playback menus
(motion picture playback)
ª[PLAY SETUP]
[PLAY MODE] (l77)
[REPEAT PLAY] (l77)
[RESUME PLAY] (l78)
[SCENE PROTECT] (l81)
[GUIDE LINES] (l66)
ª[SETUP]
[FORMAT DISC] (l85)
[FINALIZE]
(When using a DVD-RW, DVD-R or DVD-R DL) 
(l86)
[CREATE TOP MENU]
(When using a DVD-RAM) (l87)
[UN-FINALIZE] (l87)
[AUTO PROTECT] (l88)
[INFORMATION] (l89)
[FORMAT CARD] (l85)
[DISPLAY] (l110)
[DATE/TIME] (l45)
[DATE FORMAT] (l46)
[POWER SAVE] (l110)
[BEEP SOUND] (l110)
[LCD SET] (l47)
[EVF...

11 0LSQT1093
Others
ª[REC LAMP]
The recording lamp lights during recording and 
flashes when the unit receives a signal from the 
remote control or when the self-timer is counting 
down. When this is set to [OFF], it does not light 
during recording.
ª[DISPLAY]
The screen indications are selected as shown in 
the illustration below.
ª[POWER SAVE]
[OFF]:The power saving function is not 
activated.
[5 MINUTES]:When about 5 minutes have 
passed without any operation, 
this unit automatically turns off to...