Panasonic Hdc Dx1 Operating Instructions
Here you can view all the pages of manual Panasonic Hdc Dx1 Operating Instructions. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
71LSQT1093
Recording
≥The center of the screen is not enlarged if
[MF ASSIST] is set to [OFF].
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down
again to the FOCUS position.
≥You can also restore the auto focusing by
setting the AUTO/MANUAL/FOCUS switch to
AUTO.
≥The subject may not be in focus when zoomed
in if focusing with a wide angle. First, zoom in
on the subject, and then focus on it.
The center of the screen is enlarged during
manual focus adjustment. This...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-70.png "Page 71
71LSQT1093
Recording
≥The center of the screen is not enlarged if
[MF ASSIST] is set to [OFF].
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down
again to the FOCUS position.
≥You can also restore the auto focusing by
setting the AUTO/MANUAL/FOCUS switch to
AUTO.
≥The subject may not be in focus when zoomed
in if focusing with a wide angle. First, zoom in
on the subject, and then focus on it.
The center of the screen is enlarged during
manual focus adjustment. This...")
71LSQT1093 Recording ≥The center of the screen is not enlarged if [MF ASSIST] is set to [OFF]. To restore to the automatic adjustment Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position. ≥You can also restore the auto focusing by setting the AUTO/MANUAL/FOCUS switch to AUTO. ≥The subject may not be in focus when zoomed in if focusing with a wide angle. First, zoom in on the subject, and then focus on it. The center of the screen is enlarged during manual focus adjustment. This...
Page 72
![Page 72
72LSQT1093
Recording
[ ]: Auto white balance adjustment
[ ]: Indoor mode (for recording under
incandescent lamps)
≥Incandescent lights, halogen lamps
[ ]: Outdoor mode
≥Outdoors under a clear sky
[ ]: Manual adjustment mode
≥Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥Lights used for wedding receptions at
hotels, stage spotlights in theatres
≥Sunrise, sunset etc.
To restore to the automatic adjustment
Set the white balance mode to [ ].
≥You can also restore the automatic adjustment
by...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-71.png "Page 72
72LSQT1093
Recording
[ ]: Auto white balance adjustment
[ ]: Indoor mode (for recording under
incandescent lamps)
≥Incandescent lights, halogen lamps
[ ]: Outdoor mode
≥Outdoors under a clear sky
[ ]: Manual adjustment mode
≥Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥Lights used for wedding receptions at
hotels, stage spotlights in theatres
≥Sunrise, sunset etc.
To restore to the automatic adjustment
Set the white balance mode to [ ].
≥You can also restore the automatic adjustment
by...")
72LSQT1093 Recording [ ]: Auto white balance adjustment [ ]: Indoor mode (for recording under incandescent lamps) ≥Incandescent lights, halogen lamps [ ]: Outdoor mode ≥Outdoors under a clear sky [ ]: Manual adjustment mode ≥Mercury-vapor lamps, sodium lamps, some fluorescent lights ≥Lights used for wedding receptions at hotels, stage spotlights in theatres ≥Sunrise, sunset etc. To restore to the automatic adjustment Set the white balance mode to [ ]. ≥You can also restore the automatic adjustment by...
Page 73
![Page 73
73LSQT1093
Recording
(RAM) (-RW) (-R) (-R\DL) (SD)
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too
dark.
¬
Rotate the mode dial to select .
1Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2Move the cursor button left or
right to select [ ] (aperture) or
[ ] (shutter speed).
3Move the cursor button left or
right to make the adjustment.
AShutter speed: 1/60 to 1/8000...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-72.png "Page 73
73LSQT1093
Recording
(RAM) (-RW) (-R) (-R\DL) (SD)
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too
dark.
¬
Rotate the mode dial to select .
1Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2Move the cursor button left or
right to select [ ] (aperture) or
[ ] (shutter speed).
3Move the cursor button left or
right to make the adjustment.
AShutter speed: 1/60 to 1/8000...")
73LSQT1093 Recording (RAM) (-RW) (-R) (-R\DL) (SD) Shutter Speed: Adjust it when recording fast-moving subjects. Aperture: Adjust it when the screen is too bright or too dark. ¬ Rotate the mode dial to select . 1Set the AUTO/MANUAL/FOCUS switch to MANUAL. The icon shown in the illustration is displayed automatically. 2Move the cursor button left or right to select [ ] (aperture) or [ ] (shutter speed). 3Move the cursor button left or right to make the adjustment. AShutter speed: 1/60 to 1/8000...
Page 74
![Page 74
74LSQT1093
Playback
Playback
Playback of motion pictures
on a disc
(RAM) (-RW) (-R) (-R\DL)
Play back the motion pictures recorded on the
disc.
1Rotate the mode dial to select .
The lens cover closes.
2Press the cursor button up and
then left to select the [ ]
(motion picture playback) tab.
AMotion picture playback tab
The motion pictures recorded on the disc are
displayed as thumbnails.
3Select the scene to be played
back.
B Previous page
C Next page
D Scene number
The selected scene will be...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-73.png "Page 74
74LSQT1093
Playback
Playback
Playback of motion pictures
on a disc
(RAM) (-RW) (-R) (-R\DL)
Play back the motion pictures recorded on the
disc.
1Rotate the mode dial to select .
The lens cover closes.
2Press the cursor button up and
then left to select the [ ]
(motion picture playback) tab.
AMotion picture playback tab
The motion pictures recorded on the disc are
displayed as thumbnails.
3Select the scene to be played
back.
B Previous page
C Next page
D Scene number
The selected scene will be...")
74LSQT1093 Playback Playback Playback of motion pictures on a disc (RAM) (-RW) (-R) (-R\DL) Play back the motion pictures recorded on the disc. 1Rotate the mode dial to select . The lens cover closes. 2Press the cursor button up and then left to select the [ ] (motion picture playback) tab. AMotion picture playback tab The motion pictures recorded on the disc are displayed as thumbnails. 3Select the scene to be played back. B Previous page C Next page D Scene number The selected scene will be...
Page 75
75LSQT1093 Playback ªAbout motion picture compatibility ≥This unit is based on the AVCHD format. ≥The video signal that can be played back on this unit is 1440k1080/60i. ≥This unit may degrade or not playback motion pictures recorded or created on other products, and other products may degrade or not playback motion pictures recorded on this unit, even if the products support the AVCHD. ≥No sound will be heard except during normal playback. ≥If pause play is continued for 5 minutes, the screen...
Page 76
76LSQT1093 Playback The motion picture is advanced one frame at a time. 1Move the cursor button up during playback to pause the playback. 2Move the cursor button right. (The frames will be advanced one at a time in the reverse direction when you move the cursor button left.) ≥Normal playback is restored when you move the cursor button up. ≥When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0.5 seconds. ªOperating with the remote control 1)...
Page 77
![Page 77
77LSQT1093
Playback
(RAM) (-RW) (-R) (-R\DL)
Recorded scenes are grouped by date on this
unit.
Scenes recorded on the same day can be played
back in succession.
1Press the MENU button, then
select [PLAY SETUP]
#
[PLAY MODE]
# [BY DATE] and
press the cursor button.
2Select the date for playback, then
press the cursor button.
The scenes recorded on the same day are
displayed as thumbnails.
3Select the scene to be played
back.
To return to playing back all the scenes
Press the MENU button, then...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-76.png "Page 77
77LSQT1093
Playback
(RAM) (-RW) (-R) (-R\DL)
Recorded scenes are grouped by date on this
unit.
Scenes recorded on the same day can be played
back in succession.
1Press the MENU button, then
select [PLAY SETUP]
#
[PLAY MODE]
# [BY DATE] and
press the cursor button.
2Select the date for playback, then
press the cursor button.
The scenes recorded on the same day are
displayed as thumbnails.
3Select the scene to be played
back.
To return to playing back all the scenes
Press the MENU button, then...")
77LSQT1093 Playback (RAM) (-RW) (-R) (-R\DL) Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. 1Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the cursor button. 2Select the date for playback, then press the cursor button. The scenes recorded on the same day are displayed as thumbnails. 3Select the scene to be played back. To return to playing back all the scenes Press the MENU button, then...
Page 78
![Page 78
78LSQT1093
Playback
(RAM) (-RW) (-R) (-R\DL)
If playback of a scene was stopped halfway, the
playback can be resumed from where it was
stopped.
Press the MENU button, then select
[PLAY SETUP]
# [RESUME PLAY] #
[ON] and press the cursor button.
If playback of a motion picture is stopped, [ ]
appears on the thumbnail view of the stopped
scene.
To cancel the resume playback function
Press the MENU button, then select
[PLAY SETUP] # [RESUME PLAY] # [OFF]
and press the cursor button.
≥The memorized...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-77.png "Page 78
78LSQT1093
Playback
(RAM) (-RW) (-R) (-R\DL)
If playback of a scene was stopped halfway, the
playback can be resumed from where it was
stopped.
Press the MENU button, then select
[PLAY SETUP]
# [RESUME PLAY] #
[ON] and press the cursor button.
If playback of a motion picture is stopped, [ ]
appears on the thumbnail view of the stopped
scene.
To cancel the resume playback function
Press the MENU button, then select
[PLAY SETUP] # [RESUME PLAY] # [OFF]
and press the cursor button.
≥The memorized...")
78LSQT1093 Playback (RAM) (-RW) (-R) (-R\DL) If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [ON] and press the cursor button. If playback of a motion picture is stopped, [ ] appears on the thumbnail view of the stopped scene. To cancel the resume playback function Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [OFF] and press the cursor button. ≥The memorized...
Page 79
![Page 79
79LSQT1093
Playback
≥If 9 or more files have been recorded, the
next (or previous) page can be displayed
by moving the cursor button left and right or
moving the cursor button down, selecting
[ ]/[ ] by moving the cursor
button left and right and then pressing the
centre of the cursor button.
≥The file number display switches to the
page number when the still picture
playback tab or [ ]/[ ] is
selected.
4Press the cursor button.
The selected file is played back on the full
screen.
≥The...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-78.png "Page 79
79LSQT1093
Playback
≥If 9 or more files have been recorded, the
next (or previous) page can be displayed
by moving the cursor button left and right or
moving the cursor button down, selecting
[ ]/[ ] by moving the cursor
button left and right and then pressing the
centre of the cursor button.
≥The file number display switches to the
page number when the still picture
playback tab or [ ]/[ ] is
selected.
4Press the cursor button.
The selected file is played back on the full
screen.
≥The...")
79LSQT1093 Playback ≥If 9 or more files have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting [ ]/[ ] by moving the cursor button left and right and then pressing the centre of the cursor button. ≥The file number display switches to the page number when the still picture playback tab or [ ]/[ ] is selected. 4Press the cursor button. The selected file is played back on the full screen. ≥The...
Page 80
![Page 80
80LSQT1093
Editing
Editing
Editing scenes
(RAM)
The deleted scenes cannot be restored.
≥Scenes on DVD-RW, DVD-R and DVD-R DL
cannot be deleted.
¬
Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Press the button while the
thumbnail view screen is...](http://img.usermanuals.tech/thumb/58/64334/w300_hdc-dx1_mul_om_d-79.png "Page 80
80LSQT1093
Editing
Editing
Editing scenes
(RAM)
The deleted scenes cannot be restored.
≥Scenes on DVD-RW, DVD-R and DVD-R DL
cannot be deleted.
¬
Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1Press the button while the
thumbnail view screen is...")
80LSQT1093 Editing Editing Editing scenes (RAM) The deleted scenes cannot be restored. ≥Scenes on DVD-RW, DVD-R and DVD-R DL cannot be deleted. ¬ Rotate the mode dial to select and then select the [ ] (motion picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the cursor button. ¬Rotate the mode dial to select and then select the [ ] (motion picture playback) tab. 1Press the button while the thumbnail view screen is...