Panasonic Hd Plasma Display Th 50pf10 Operating Instructions

31
PRESENT TIME SETUP / SET UP TIMER
PRESENT TIME SETUP
The timer can switch the Plasma Display ON or OFF.
Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. 
Then set POWER ON TIME / POWER OFF TIME.
Press to display the SET UP menu.
Press to select SET UP TIMER or 
PRESENT TIME SETUP.
Press to display the SET UP TIMER screen or 
PRESENT TIME SETUP screen.
1
2
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN...

32
PRESENT TIME SETUP / SET UP TIMER
SET UP TIMER
Press to select 
POWER ON TIME / POWER OFF TIME.
Press to set up POWER ON TIME / POWER OFF 
TIME.
   button: Forward
   button: Back
Notes:
• Pressing “  ” or “  ” button once changes POWER ON TIME / POWER OFF TIME 
1 minute.
• Pressing “  ” or “  ” button continuously changes POWER ON TIME / POWER OFF 
TIME by 15 minutes.
 
Press to select POWER ON FUNCTION 
/ POWER OFF FUNCTION. 
Press to select ON.
Press twice to exit from SET UP.
Note: 
Timer function...

33
Do not display a still picture, especially in NORMAL mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
NEGATIVE / SCROLL selection
2
3 1
4
Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
WHITE BAR SCROLL   NEGATIVE 
WHITE BAR SCROLL  : A white bar will scroll from left to right.
NEGATIVE    : A negative image will be displayed on the...

34
Setup of SCREENSAVER Time
After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating 
Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Press to select START TIME / FINISH TIME
(When TIME OF DAY is selected).
Press to select SHOW DURATION / SAVER 
DURATION (When INTERVAL is selected).
Press to setup.
   button: Forward
   button: Back
Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. Notes:
 • Pressing...

35
SIDE BAR ADJUST
1
Press to select the SIDE BAR ADJUST.
Press to select OFF, DARK, MID, BRIGHT.
Press to exit from SCREENSAVER.
2
Do not display a picture in NORMAL mode for an extended 
period, as this can cause an image retention to remain on 
the side panels either side of the display fi eld.
To reduce the risk of such an image retention, illuminate the 
side panels.
Display the SCREENSAVER screen.
(Refer to the previous page, operation guide steps 1 and 2)
Notes: 
•  To reduce the occurrence of...

36
Reduces power consumption
Press to select 
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On 
 Off
Press to exit from SET UP. • POWER SAVE:  When this function is turned ON, luminous level of the Plasma Display is suppressed, so 
power consumption is reduced.
• STANDBY SAVE:  When this function is turned ON, power consumption of the microcomputer is reduced 
during power supply standby (see page 14-17), so standby power of the set is reduced.
• POWER...

37
By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a Display number to determine its location.
Press to display the SET UP menu.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” 
menu.
Press to select the MULTI DISPLAY SETUP.
Press to select “ON” or “OFF”.
How to setup MULTI DISPLAY
group of 16 (4 × 4) group of 4 (2 ×...

38
SET UP for MULTI DISPLAY
How to set the Display location number for each Plasma Display 
Display Number locations for each arrangement.
(Examples)
4
7
A1
OFF
AI-SYNCHRONIZATION LOCATION MULTI DISPLAY SETUP OFF 
OFF 
MULTI DISPLAY SETUP 
HORIZONTAL SCALE 
VERTICAL SCALE 
SEAM HIDES VIDEO × 2 
× 2 
MULTI DISPLAY SETUP OFF 
OFF 
A1 
LOCATION 
MULTI DISPLAY SETUP 
HORIZONTAL SCALE 
VERTICAL SCALE 
SEAM HIDES VIDEO × 2 
× 2 
OFF
AI-SYNCHRONIZATION
( 2 × 1) ( 2 × 3 )
A1 A2 A3 A4 A5
B1 B2 B3 B4 B5
C1 C2 C3...

39
Press twice to exit from SET UP.9
SET UP for MULTI DISPLAY
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
2
3Switch  to  on the right side.
Press the 
 button on the remote control.
Press one of 
 - ,  for the tens digit setting.
Press one of 
 - ,  for the units digit setting. 4
Notes:
•  The numbers in 2, 3 and 4 should be set up quickly.
•  Adjustable ID number range is 0 - 99.
•  If a number button is pressed more than two times,...

40
Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3 
times and rotated 90-degree.
SET UP for PORTRAIT
(Example)
Press to display the SET UP menu.
Press to select the PORTRAIT SETUP.
Press to display the “PORTRAIT SETUP” menu.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI 
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to select...