Panasonic Hd Plasma Display Th 50pf10 Operating Instructions
Have a look at the manual Panasonic Hd Plasma Display Th 50pf10 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. Press to display the SET UP menu. Press to select SET UP TIMER or PRESENT TIME SETUP. Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen. 1 2 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGEENGLISH ( US) COMPONENT/RGB-IN SELECT RGB INPUT LABELSIGNAL POWER SAVE SET UP 2/2 SET UP SET UP TIMERPORTRAIT SETUP PRESENT TIME SETUP SCREENSAVER MULTI DISPLAY SETUP 99:99MON PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET PRESENT TIME OF DAY DAY 10:00TUE PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET PRESENT TIME OF DAY DAY Display the PRESENT TIME SETUP screen. To set up DAY and PRESENT TIME OF DAY, follow the procedure described below. Press to select DAY or PRESENT TIME OF DAY. Press to set up DAY or PRESENT TIME OF DAY. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute. • Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes. Press to select SET. Press to store PRESENT TIME SETUP. Notes: • SET cannot be selected unless PRESENT TIME OF DAY is set. • Unless setting the present time other than “99:99”, DAY setting is invalid. Press to exit from PRESENT TIME SETUP. 1 2 3
32 PRESENT TIME SETUP / SET UP TIMER SET UP TIMER Press to select POWER ON TIME / POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes POWER ON TIME / POWER OFF TIME 1 minute. • Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF TIME by 15 minutes. Press to select POWER ON FUNCTION / POWER OFF FUNCTION. Press to select ON. Press twice to exit from SET UP. Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. Display the SET UP TIMER SCREEN.1 2 3 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER OFF TIME POWER ON TIME POWER ON FUNCTION OFF OFF PRESENT TIME OF DAY 99:99 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER OFF TIME POWER ON TIME POWER ON FUNCTION OFF OFF PRESENT TIME OF DAY 99:99
33 Do not display a still picture, especially in NORMAL mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. NEGATIVE / SCROLL selection 2 3 1 4 Press to display the SET UP menu. Press to select the SCREENSAVER. Press to select the SCREENSAVER screen. Press to select the FUNCTION. Press to select the desired function. WHITE BAR SCROLL NEGATIVE WHITE BAR SCROLL : A white bar will scroll from left to right. NEGATIVE : A negative image will be displayed on the screen. MODE selection START setting 5 When the MODE is set to ON, press to select START. Press to start SCREENSAVER. The menu screen will disappear and the SCREENSAVER will be activated. To stop the SCREENSAVER under ON, press the R button or any buttons on the main unit. Note: When the display is turned off, the SCREENSAVER will be deactivated. Press to select the MODE. Press to select each mode items. OFF INTERVAL : Operates when SHOW DURATION and SAVER DURATION are set up and those times arrive. TIME OF DAY : Operates when START TIME and FINISH TIME are set up and those times arrive. ON : Operates when START is selected and the ACTION ( ) button is pressed. SCREENSAVER (For preventing image retention) 2/2 SET UP SCREENSAVER MULTI DISPLAY SETUP SET UP TIMER PORTRAIT SETUP PRESENT TIME SETUP SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL OFF 6:15 12:30 OFF OFF SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL OFF 6:15 12:30 OFF OFF SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL ON 6:15 12:30 OFF OFF SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99
34 Setup of SCREENSAVER Time After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.) Press to select START TIME / FINISH TIME (When TIME OF DAY is selected). Press to select SHOW DURATION / SAVER DURATION (When INTERVAL is selected). Press to setup. button: Forward button: Back Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. Notes: • Pressing “ ” or “ ” button once changes the Time 1 minute. [However, switching occurs every 15 minutes when Periodic Time is selected.] • Pressing “ ” or “ ” button continuously changes the Time by 15 minutes. Reduces screen image retention These functions prevent the occurrence of an “image retention” on the display when turned ON. WOBBLING: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image. ON1: Shifts the image every 30 seconds. ON2: Shifts the image at a dot level pitch depending on screen-detection. PEAK LIMIT: Suppresses image contrast (peak brightness). Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 53) Press to select “SCREENSAVER”. Press to display SCREENSAVER menu. Press to select “WOBBLING” or “PEAK LIMIT”. Press to select “ON1”, “ON2” or “OFF” (WOBBLING). “ON” or “OFF” (PEAK LIMIT).2 3 1 Press to display the SET UP menu. SCREENSAVER (For preventing image retention) SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL OFF 6:15 12:30 OFF OFF SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMITWHITE BAR SCROLL 6:15 12:30 OFF OFF INTERVAL SIDE BAR ADJUSTBRIGHT SAVER DURATION SHOW DURATIONPRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL 6:15 12:30 OFF OFF TIME OF DAY SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99 2/2 SET UP SCREENSAVER MULTI DISPLAY SETUP SET UP TIMER PORTRAIT SETUP PRESENT TIME SETUP SCREENSAVER START FUNCTION MODE SIDE BAR ADJUST WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL OFF 6:15 12:30 BRIGHT OFF OFF PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL TIME OF DAY 0:00 0:00 OFF OFF SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMITWHITE BAR SCROLL INTERVAL OFF OFF0:00 0:00 SIDE BAR ADJUSTBRIGHT SAVER DURATION SHOW DURATIONPRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIMEWHITE BAR SCROLL TIME OF DAY 6:15 12:30 OFF OFF SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT SAVER DURATION SHOW DURATIONWHITE BAR SCROLL INTERVAL 6:15 12:30 OFF OFF SIDE BAR ADJUSTBRIGHT PRESENT TIME OF DAY 99:99
35 SIDE BAR ADJUST 1 Press to select the SIDE BAR ADJUST. Press to select OFF, DARK, MID, BRIGHT. Press to exit from SCREENSAVER. 2 Do not display a picture in NORMAL mode for an extended period, as this can cause an image retention to remain on the side panels either side of the display fi eld. To reduce the risk of such an image retention, illuminate the side panels. Display the SCREENSAVER screen. (Refer to the previous page, operation guide steps 1 and 2) Notes: • To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT. • The side bar may fl ash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode will reduce such fl ashing.side bars NORMAL mode image retention Picture out Picture Picture and PictureNon picture area This function may be applicable to the non-picture area. OFF MID BRIGHTDARK SCREENSAVER (For preventing image retention) SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIME WHITE BAR SCROLL OFF 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT PRESENT TIME OF DAY 99:99
36 Reduces power consumption Press to select “POWER SAVE” “STANDBY SAVE” “POWER MANAGEMENT” “AUTO POWER OFF”. Press to select “ON” or “OFF”. On Off Press to exit from SET UP. • POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced. • STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 14-17), so standby power of the set is reduced. • POWER MANAGEMENT: The unit power supply is turned ON or OFF depending on whether or not there is a signal during PC input mode. This function is enabled when it is turned ON. (Only during input from PC(Mini D-sub) terminal) • AUTO POWER OFF: Equipment power supply is turned OFF when there is no signal. When this is set to On, the power supply of the unit goes Off 10 minutes after the input signals stop. This function is effective for input signals except input from PC (Mini D-sub) terminal. Press to select INPUT LABEL. Press to change the INPUT LABEL. Customizing the Input labels This function can change the label of the Input signal to be displayed. Select the input signal which you would like to change its label before customizing the Input labels. (see page 17, 20) Note: While selecting a Input signal through Optional Terminal Board connected to Slot 1, Slot 2 and Slot 3, the Input label will depend on each Optional Terminal Board. INPUT LABELS for Slot 1, Slot 2, Slot 3 and Mini D-sub: [Slot1 Input] INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1 [Slot2 Input] INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2 [Slot3 Input] INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3 [PC (Mini D-sub) input] PC/COMPONENT/RGB/DVD/STBNote: “POWER MANAGEMENT” and “AUTO POWER OFF” are effective during normal viewing (one picture screen) only. 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP 1 2 3 Addition sign“A” “B” Selected InputComposite S VIDEO When BNC Dual Video Terminal Board (TY-FB9BD) is used, an “A” or “B” is added at the end of each input label, depending on the input selected (see below).
37 By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a Display number to determine its location. Press to display the SET UP menu. Press to select the MULTI DISPLAY SETUP. Press to display the “MULTI DISPLAY SETUP” menu. Press to select the MULTI DISPLAY SETUP. Press to select “ON” or “OFF”. How to setup MULTI DISPLAY group of 16 (4 × 4) group of 4 (2 × 2) group of 9 (3 × 3) 1 2 3 2/2 SET UP SCREENSAVER MULTI DISPLAY SETUP SET UP TIMER PORTRAIT SETUP PRESENT TIME SETUP × 2 MULTI DISPLAY SETUP HORIZONTAL SCALE OFF A1 OFF AI-SYNCHRONIZATION VERTICAL SCALE LOCATIONOFF SEAM HIDES VIDEO× 2 MULTI DISPLAY SETUP SET UP for MULTI DISPLAY (Example) (see page 38 for more displays lineups.) group of 25 (5 × 5) Note: If you set MULTI DISPLAY SETUP to ON, PORTRAIT SETUP will be unavailable.
38 SET UP for MULTI DISPLAY How to set the Display location number for each Plasma Display Display Number locations for each arrangement. (Examples) 4 7 A1 OFF AI-SYNCHRONIZATION LOCATION MULTI DISPLAY SETUP OFF OFF MULTI DISPLAY SETUP HORIZONTAL SCALE VERTICAL SCALE SEAM HIDES VIDEO × 2 × 2 MULTI DISPLAY SETUP OFF OFF A1 LOCATION MULTI DISPLAY SETUP HORIZONTAL SCALE VERTICAL SCALE SEAM HIDES VIDEO × 2 × 2 OFF AI-SYNCHRONIZATION ( 2 × 1) ( 2 × 3 ) A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 C1 C2 C3 C4 C5 D1 D2 D3 D4 D5 E1 E2 E3 E4 E5 ( 4 × 4 ) Press to select HORIZONTAL SCALE. Press to select “× 1”, “× 2”, “× 3”, “× 4”, “× 5”. Press to select LOCATION. Press to select the required arrangement number. (A1-E5 : Refer to the following) A1 OFF AI-SYNCHRONIZATION LOCATION× 2 MULTI DISPLAY SETUP HORIZONTAL SCALE OFF OFF VERTICAL SCALE SEAM HIDES VIDEO × 2 MULTI DISPLAY SETUP 5Press to select VERTICAL SCALE. Press to select “× 1”, “× 2”, “× 3”, “× 4”, “× 5”. 6Press to select SEAM HIDES VIDEO. Press to select “OFF”, “ON”. A1 OFF AI-SYNCHRONIZATION LOCATION MULTI DISPLAY SETUP OFF OFF MULTI DISPLAY SETUP HORIZONTAL SCALE VERTICAL SCALE SEAM HIDES VIDEO × 2 × 2 ( 4 × 2 ) To hide joints between displays. Suitable for moving image display. To show joints between displays. Suitable for still image display. ON OFF ( 5 × 5 )
39 Press twice to exit from SET UP.9 SET UP for MULTI DISPLAY You can set the remote control ID when you want to use this remote control on one of several different displays. 1 2 3Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 Notes: • The numbers in 2, 3 and 4 should be set up quickly. • Adjustable ID number range is 0 - 99. • If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote control. ID Cancellation Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.) Notes: • Set the Remote ID “On” to operate the ID remote control. If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. (see page 48) • The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 48). ID remote control button operation The operation is the same as normal remote control except for the button. 8 MULTI DISPLAY SETUP ON OFF MULTI DISPLAY SETUP HORIZONTAL SCALE VERTICAL SCALE SEAM HIDES VIDEO A1 LOCATION× 2 × 2 AI-SYNCHRONIZATIONOFF Press to select AI-SYNCHRONIZATION. Press to select “OFF” , “ON”. Adjusts brightness of displays when using MULTI DISPLAY. The brightness depends on each display’s setting.Equalize the brightness of all the displays. OFF ON Note: If you set AI-SYNCHRONIZATION to ON, the following menus will be unavailable and these settings will be fi xed to the initial values. PICTURE menu: COLOR, TINT AI-SYNCHRONIZATION ID Remote Control Function
40 Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3 times and rotated 90-degree. SET UP for PORTRAIT (Example) Press to display the SET UP menu. Press to select the PORTRAIT SETUP. Press to display the “PORTRAIT SETUP” menu. Press to select the PORTRAIT SETUP. Press to select “ON” or “OFF”. Note: If you set PORTRAIT SETUP to ON, MULTI DISPLAY SETUP will be unavailable. Press to select SEAM HIDES VIDEO. Press to select “OFF” , “ON”. How to setup PORTRAIT 1 2 3 4 To hide joints between displays. Suitable for moving image display.To show joints between displays.Suitable for still image display. ON OFF 2/2 SET UP SCREENSAVER MULTI DISPLAY SETUP PORTRAIT SETUP SET UP TIMER PRESENT TIME SETUP OFF PORTRAIT SETUP SEAM HIDES VIDEOOFF 1 OFF AI-SYNCHRONIZATION VIEWING AREA LOCATION16:9 PORTRAIT SETUP OFF PORTRAIT SETUP SEAM HIDES VIDEOOFF 1 OFF AI-SYNCHRONIZATION VIEWING AREA LOCATION16:9 PORTRAIT SETUP Note: When using the PORTRAIT function with displays set vertically, “V.Installation” in Options menu has to be set to “On” (see page 49).