Panasonic Hd Integrated Camera Aw He60h Vol1 Operating Instructions

11
Installation
	
Instructions
How to in\fta\b\b and con\gnect the unit(continued)
6	Connect the rear pa\gne\b connector\f.
Anchor the A\f adaptor cable in place using t\ghe cable clamp.
Cab\be c\bampStrap part LAN cab\be
LAN cab\be
Interface cab\be
Interface cab\be Video output 
cab\be
Coaxia\b cab\be\f
AC adaptor cab\be
AC adaptor cab\be
[AW-
HE60H]
[AW
-
 HE60S]
Square ho\be (one at either \fide)
Square ho\be (one at either \fide)
Tab (one at either \g\fide)
Tab (one at either \g\fide) Screw for...

12
How to in\fta\b\b and con\gnect the unit(continued)
pwWhen u\fing the WV- Q105 (optiona\b acce\f\g\fory)
It is recommended th\gat you provide an inspection \gopening or other su\gch space for access purposes in the area \gnear where the 
equipment is insta\glled in order to facilitate installa\gtion and the wiring connections work.
Before mounting the mo\gunt bracket, check that the install\gation location is \gstrong enough to wi\gthstand the total m\gass  
(approx. 2.0
  kg [4.41   lb]) which will...

13
Installation
	
Instructions
How to in\fta\b\b and con\gnect the unit(continued)
When in\fta\b\bing the \gunit on a wa\b\b (in\ft\ga\b\bation examp\be)
1	Before proceeding, fa\fhion an L-\fhaped mounting fixt\gure, and attach the fixture \fecur\ge\by to the wa\b\b 
where the unit wi\b\b\g be in\fta\b\bed.
IMPORTANT
pBefore installing the \gunit, check that the surface of the wall where the unit\g will be installed \gis strong enough to\g 
bear not only the \gtotal weight (approx. 2.0   kg [4.41   lb])...

14
Changing the directi\gon of the namep\bate\g
When the unit is m\gounted on the ceili\gng, its nameplate w\gill be upside down.
The direction of th\ge unit’s nameplate can be\g changed.
1	Pu\fh in the part indicated by the arrow, and pu\b\b out the n\gamep\bate.
2	Change the direction of \gthe namep\bate.
3	Pu\fh the namep\bate b\gack into p\bace. 

15
Installation
	
Instructions
Removing the camera
1	Turn off the circuit breaker and po\gwer.
2	Remove the cab\be cover.
pRemove the screw (\b3) for the cable cover used to secure t\ghe cover.
p
Push the tab par
ts of the cover to disengage the \gcover.
3	Di\fconnect the cab\be\f.
Disconnect the power cable, video cable, and control cable, etc.
4	Remove the main unit mo\gunting \fcrew u\fed to \fecure the\g unit and mount bra\gcket.
5	Pu\fh the unit (1). Turn it approximate\by 15 degree\f away from...

16
Stand-a\bone in\fta\b\ba\gtion  
(when the mount bra\gcket i\f going to be u\g\fed)
The same steps are\g followed as for the kind of inst\gallation where the\g unit is suspended f\grom an overhead surface  
(pages  8 to   11).
1	Check the mounting \fpace\g.
pAs with installing \gthe unit suspended f\grom an o verhead surface, carefully check the space where \gthe unit will be 
mounted, and then dec\gide if it is approp\griate to install th\ge unit in that spa\gce.
Note
2	Mount the mount bra\gcket...

17
Installation
	
Instructions
Stand-a\bone in\fta\b\ba\gtion (when the mount bra\gcket i\f going to be u\g\fed)(continued)
5	Check the mounting.
6	Connect the rear pa\gne\b connector\f.
LAN cab\be
LAN cab\be Interface cab\be
Interface cab\be
Video output cab\be
Coaxia\b cab\be\f
AC adaptor cab\be
AC adaptor cab\be
[AW-
HE60H]
[AW
-
 HE60S]
Square ho\be (one at either \fide\g)
Tab (one at either \g\fide)
Tab (one at either \g\fide) Screw for cab\be cover 
(M3 \fcrew)
(with f\bat wa\fher, 
\fpring...

18
Stand-a\bone in\fta\b\ba\gtion  
(when the mount bra\gcket i\f not going to \gbe u\fed)
pwWhen in\fta\b\bing the \gunit on a de\fktop
P\bace the unit f\bat \gon the \furface.
p
Install the unit i\gn a stab
 le location which \gwill not be suscep\gtible to shaking. If the unit is in\gstalled in a locati\gon which is 
susceptible to shaking, this\g will cause the un\git’s images to shake in turn.
p
T

ake care not to allo\gw the unit to fall or otherwise b\ge damaged during installation.
p
When carr...

19
Installation
	
Instructions
Connection\f
pwConnection\f with an\g  HD monitor
HD monitor HDMI \figna\b (AW
-
 HE60H on\by), SDI \figna\b (AW
-
 HE60S on\by) or 
HD ana\bog component \g\figna\b HD Integrated Camer\ga 
AW
-
 HE60
Wire\be\f\f remote contr\go\b\ber (optiona\b acce\f\g\fory)
Up to four units can be o\gperated using one remot\ge control. 

20
Connection\f(continued)
pwConnection\f with a \g contro\b\ber (AW- RP655 or AW- RP555)
YPBPRVINOUT
LAN cab\be (\ftraight cab\be)
Pan-ti\bt head/ 
camera contro\b \figna\b\f HD Integrated Camer\ga 
AW
-

HE60
Mu\bti Hybrid 
Contro\b Pane\b 
AW
-

RP555 HDMI/SDI video \fign\ga\b
AC Adapter 
AW
-

PS550 Acce\f\fory AC adaptorMonitor
Mu\bti-Function Cont\gro\b\ber 
AW
-

RP655 AC Adapter 
AW
-

PS550Mu\bti-Interface 
Cab\be
AW
-

CA20T6
RJ-45 re\bay 
adapter
pPrecaution\f when u\fi\gng the A
W- RP655 or...