Panasonic Hd Integrated Camera Aw He2 Operating Instructions

41VQT4N15
≥The web setting screen (Live screen) starts up.
A Switch between the Live screen and the Setup screen.
B Switch the unit from on to standby mode or vice versa.
C Change the resolution of the camera image. ([640 k360]/[320 k180])
D The camera image is displayed. (When a tally light up signal is received, a red frame is 
displayed over the camera image)
E Operate the camera.
1) Zoom operations
2) Switch the control mode (Main screen / PinP)
3) Pan/tilt operations, PinP operations (control pad,...

42VQT4N15
2Click [Setup] on the Live screen.
≥The user identification screen is displayed.
3Enter the default user name and password, and click [OK].
≥If the message is displayed, click [OK].
≥ The Setup screen is displayed.
For details regarding camera operations, refer to the “Operating Instructions ”.
Default user name:admin
Default password:12345
For details regarding the Setup screen, refer to the “Operating Instructions ”.
AW-HE2PPJPJYEEJEJY_PDF_mst.book  42 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 

43VQT4N15
≥The camera cannot be operated in standby mode.
≥ For security protection, change the user name and password on the User mng. screen.
≥ If the controller and web browser are being used at the same time, the content selected 
using the controller may not be reflected on the web setting screen.
When using both the controller and web browser, be absolutely sure to check the settings 
using the controller or camera menu.
AW-HE2PPJPJYEEJEJY_PDF_mst.book  43 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 

44VQT4N15
You can operate the unit with the optional wireless remote controller (AW-RM50G).
Names and Functions of Main Parts
Buttons used for operating this unit are described.1 Signal transmission window
2 ON/STANDBY button
Each time this is pressed for 2 seconds, 
operation switches between turning on the 
unit‘s power and establishing the standby 
status.
3 CAM1 to CAM4 buttons (l46)
4 SET button
Press and hold for 2 seconds to set the 
white balance.
5 MODE button
Each time you press the button, the...

45VQT4N15
14 MENU button
Press and hold for 2 seconds to display the 
camera menu of the unit.
15 OPT-OFF button
Switches the control mode (Main screen / 
PinP)
16 OPT-ON button
Displays / hides PinP.
17 HOME button
If you press and hold the button for 
2 seconds, the zoom level of the unit is 
changed to x1.≥
If you press and hold the button for 
2 seconds when the control mode is set to 
PinP, the retrieval position of PinP moves 
to the center of the screen and the zoom 
level is changed to x1.
18...

46VQT4N15
Before Operating With the Wireless Remote 
Controller
Select the camera by pressing the button you pressed for setting the remote control ID for the 
camera (one of the CAM1 to CAM4 buttons).
≥You can operate the selected camera until you select another one.
≥ The selected camera is retained in the memory after the battery has been removed from 
the wireless remote controller. (When left with the batteries removed for an extended time, 
a reset with the CAM1 button pressed is performed.)...

47VQT4N15
Recording of pre-recorded tapes or discs or other published or broadcast material for 
purposes other than your own private use may infringe copyright laws. Even for the purpose 
of private use, recording of certain material may be restricted.
≥Distributing, copying, disassembling, reverse compiling, reverse engineering, and also 
exporting in violation of export laws of the software provided with this unit are expressly 
prohibited.
≥HDMI, the HDMI Logo, and High-Definition Multimedia...

48VQT4N15
Panasonic will provide, for a charge no more than our cost of physically performing source 
code distribution, the complete machine readable copy of the corresponding source code of 
GPL/LGPL software to any third party who contacts us at the contact point below for at least 
3 years after this product is released.
Contact point: [email protected]
This source code can also be obtained for free from the following website.
http://panasonic.net/avc/oss/index.html...

49VQT4N15
HD Integrated Camera
Information for your safety
Operating Instructions
Specifications
Power source:
DC 5.0 V (When using AC adaptor)
Power consumption:
3.6 W
Image sensor:
1/2.33 type (1/2.33 z) 1MOS image sensor
(effective size of imaging element: 1/4.37)
Total; Approx. 15300 K
Effective pixels; Motion picture; Approx. 3910 K (16:9)
Lens:
F2.0 (f = 2.15 mm)
35 mm equivalent; Approx. 18.0 mm (16:9)
Field of view; 95° (horizontal), 
56° (vertical) (When zoom is 1 k)
Minimum focus distance;...

50VQT4N15
AC adaptor
Information for your safetyPower source:
(AW-HE2P)
AC 100 V to 240 V, 50/60 Hz
(AW-HE2E)
AC 110Vto240V, 50/60Hz
Power consumption:
12 W
Output:
DC 5.0V, 1.6A
AW-HE2PPJPJYEEJEJY_PDF_mst.book  50 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分