Panasonic Hd Integrated Camera Aw He2 Operating Instructions

							41VQT4N15
≥The web setting screen (Live screen) starts up.
A Switch between the Live screen and the Setup screen.
B Switch the unit from on to standby mode or vice versa.
C Change the resolution of the camera image. ([640 k360]/[320 k180])
D The camera image is displayed. (When a tally light up signal is received, a red frame is 
displayed over the camera image)
E Operate the camera.
1) Zoom operations
2) Switch the control mode (Main screen / PinP)
3) Pan/tilt operations, PinP operations (control pad, buttons)
4) Preset memory registration/retrieval
5) Display / hide PinP
6) Change the display position of PinP
7) Brightness adjustment





14
5
26
7
3
AW-HE2PPJPJYEEJEJY_PDF_mst.book  41 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							42VQT4N15
2Click [Setup] on the Live screen.
≥The user identification screen is displayed.
3Enter the default user name and password, and click [OK].
≥If the message is displayed, click [OK].
≥ The Setup screen is displayed.
For details regarding camera operations, refer to the “Operating Instructions ”.
Default user name:admin
Default password:12345
For details regarding the Setup screen, refer to the “Operating Instructions ”.
AW-HE2PPJPJYEEJEJY_PDF_mst.book  42 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							43VQT4N15
≥The camera cannot be operated in standby mode.
≥ For security protection, change the user name and password on the User mng. screen.
≥ If the controller and web browser are being used at the same time, the content selected 
using the controller may not be reflected on the web setting screen.
When using both the controller and web browser, be absolutely sure to check the settings 
using the controller or camera menu.
AW-HE2PPJPJYEEJEJY_PDF_mst.book  43 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							44VQT4N15
You can operate the unit with the optional wireless remote controller (AW-RM50G).
Names and Functions of Main Parts
Buttons used for operating this unit are described.1 Signal transmission window
2 ON/STANDBY button
Each time this is pressed for 2 seconds, 
operation switches between turning on the 
unit‘s power and establishing the standby 
status.
3 CAM1 to CAM4 buttons (l46)
4 SET button
Press and hold for 2 seconds to set the 
white balance.
5 MODE button
Each time you press the button, the signal 
switches between the color bar signal output 
and the camera image output.
6 1 to 9 buttons
Registers and retrieves preset memories.
7 PRESET button
Press this button and any of the buttons 
from 1 to 9 simultaneously to register a 
preset memory.
8 Pan-tilt buttons and menu operation  buttons
9 Enter button
10 FAST button
Changes the pan/tilt or zoom speed to high 
speed.
11 SLOW button
Changes the pan/tilt or zoom speed to low 
speed.
12 A/IRIS button
Set brightness adjustment to auto mode.
13 M/IRIS button
Set brightness adjustment to manual mode.
Operating Instructions
Wireless remote controller
Consult your dealer concerning the purchase of a wireless remote controller.
2
3
4
6
7
8
14
17
15
16
18
1
10
11
12
13 5
9
19
AW-HE2PPJPJYEEJEJY_PDF_mst.book  44 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							45VQT4N15
14 MENU button
Press and hold for 2 seconds to display the 
camera menu of the unit.
15 OPT-OFF button
Switches the control mode (Main screen / 
PinP)
16 OPT-ON button
Displays / hides PinP.
17 HOME button
If you press and hold the button for 
2 seconds, the zoom level of the unit is 
changed to x1.≥
If you press and hold the button for 
2 seconds when the control mode is set to 
PinP, the retrieval position of PinP moves 
to the center of the screen and the zoom 
level is changed to x1.
18 ZOOM button
19 IRIS_ /IRIS` button
Adjust the brightness manually.
Usable Range for the Wireless Remote Controller
Distance: Within approx. 10 m (32.8 ft.)
≥ When strong light such as fluorescent 
light, light from a plasma monitor, or 
sunlight shines on the signal light-sensing 
area, operation may not be possible even 
within this range.
≥ As the signal light-sensing angle becomes 
larger, the distance at which light can be 
sensed decreases.
Setting the Remote Control ID of the Camera
Set the camera’s remote control ID by selecting the option from [CAM1] – [CAM4].
≥Turn on the power to the unit. ( l41)
1Open the Setup screen. ( l40)
2Click [Image], and click the [System] tab.
3Select one of the options [CAM1] – [CAM4] in [IR ID].
4Click [Set] to confirm.
≥The default setting is [CAM1].
≥ When operating a multiple number of these units using a wireless remote controller, set a 
different remote control ID.
≥ When using one unit, set the remote control ID to [CAM1] unless the setting needs to be 
changed.
A
Wireless remote control signal 
light-sensing area

AW-HE2PPJPJYEEJEJY_PDF_mst.book  45 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							46VQT4N15
Before Operating With the Wireless Remote 
Controller
Select the camera by pressing the button you pressed for setting the remote control ID for the 
camera (one of the CAM1 to CAM4 buttons).
≥You can operate the selected camera until you select another one.
≥ The selected camera is retained in the memory after the battery has been removed from 
the wireless remote controller. (When left with the batteries removed for an extended time, 
a reset with the CAM1 button pressed is performed.)
AW-HE2PPJPJYEEJEJY_PDF_mst.book  46 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							47VQT4N15
Recording of pre-recorded tapes or discs or other published or broadcast material for 
purposes other than your own private use may infringe copyright laws. Even for the purpose 
of private use, recording of certain material may be restricted.
≥Distributing, copying, disassembling, reverse compiling, reverse engineering, and also 
exporting in violation of export laws of the software provided with this unit are expressly 
prohibited.
≥HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing LLC in the United States and other countries.
≥ Microsoft
®, Windows® and Internet Explorer® are either registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or other countries.
≥ Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
≥ Mac, Mac OS and Safari are registered trademarks of Apple Inc., in the United States and 
other countries.
≥ Intel
® and Intel®Core™ are trademarks of Intel Corporation in the U.S. and/or other 
countries.
≥ Other names of systems and products mentioned in these instructions are usually the 
registered trademarks or trademarks of the manufacturers who developed the system or 
product concerned.
This product is comprised of the following types of software.
1) Software developed solely by Panasonic Corporation (Panasonic).
2) Software that is owned by third parties and that Panasonic is licensed under separate 
specific conditions.
3) Software licensed under GNU GENERAL PUBLIC LICENSE Version2.0 (GPL V2.0).
4) Software licensed under GNU LESSER GENERAL PUBLIC LICENSE Version2.1 (LGPL V2.1).
5) Open source software licensed under conditions other than GPL V2.0 or LGPL V2.1.
See the license terms on the supplied CD-ROM of the Operating Instructions, for software 
that is classified under (3) to (5) above.
The copyright of software that is classified under (3) to (4) above belongs to several 
individuals. See the following for more details on the relevant copyright owners.
http://panasonic.net/avc/oss/index.html
Software licensed under GPL V2.0 and LGPL V2.1 (GPL/LGPL software) is distributed with 
the assumption that the software is useful by itself, however Panasonic takes no 
responsibility whatsoever, including any implied  warranty of its “merchantability” or “fitness 
for a particular purpose”.
Operating Instructions
About copyright
AW-HE2PPJPJYEEJEJY_PDF_mst.book  47 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							48VQT4N15
Panasonic will provide, for a charge no more than our cost of physically performing source 
code distribution, the complete machine readable copy of the corresponding source code of 
GPL/LGPL software to any third party who contacts us at the contact point below for at least 
3 years after this product is released.
Contact point: [email protected]
This source code can also be obtained for free from the following website.
http://panasonic.net/avc/oss/index.html
AW-HE2PPJPJYEEJEJY_PDF_mst.book  48 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							49VQT4N15
HD Integrated Camera
Information for your safety
Operating Instructions
Specifications
Power source:
DC 5.0 V (When using AC adaptor)
Power consumption:
3.6 W
Image sensor:
1/2.33 type (1/2.33 z) 1MOS image sensor
(effective size of imaging element: 1/4.37)
Total; Approx. 15300 K
Effective pixels; Motion picture; Approx. 3910 K (16:9)
Lens:
F2.0 (f = 2.15 mm)
35 mm equivalent; Approx. 18.0 mm (16:9)
Field of view; 95° (horizontal), 
56° (vertical) (When zoom is 1 k)
Minimum focus distance; Approx. 80 cm 
(31.496 q) (25 oC (77 °F))
Shutter speed
(AW-HE2P)1/60 to 1/12000
(AW-HE2E)1/50 to 1/12000
Zoom:
Approx. 2 k i.Zoom,
Approx. 4 k Digital Zoom
Pan/tilt angle:
±23° approx. /±14° approx. (when i.Zoom is 
approx. 2 k)
±35° approx. /±21° approx. (when digital 
zoom is approx. 4 k)
Microphone:
Stereo microphone
White balance adjustment:
Auto tracking white balance system
Standard illumination:
1,400 lxMinimum required illumination:
(AW-HE2P)
Approx. 20 lx (1/60 in Auto Mode)
(AW-HE2E)
Approx. 20 lx (1/50 in Auto Mode)
HDMI connector video output level:
HDMI
™ 1080p/1080i/720p/480p
(when the system frequency is 59.94 Hz) / 
576p (when the system frequency is 50 Hz)
HDMI connector audio output level:
Linear PCM
Network:
10BASE-T/100BASE-TX, RJ45 connector
Automatic recognition of straight/crossover 
cable
Network output image;
JPEG, 640 k480 (640 k360) or 320 k240 
(320 k180), up to 30fps (16:9 video is 
transmitted in the LetterBox format).
USB:
Micro-B terminal
Power supply function (power supplied from 
the USB terminal when there is no power 
provided from the DC input terminal)
Dimensions:
80 mm (W) k118 mm (H)k 138 mm (D)
[3.15 q (W)k 4.646 q (H) k5.433 q (D)]
Mass (Weight):
Approx. 244
g (Approx. 0.538 lbs.)
Operating temperature:
0 oCto40 oC (32 °F to 104 °F)
Operating humidity:
10%RH to 80%RH
AW-HE2PPJPJYEEJEJY_PDF_mst.book  49 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 
						

							50VQT4N15
AC adaptor
Information for your safetyPower source:
(AW-HE2P)
AC 100 V to 240 V, 50/60 Hz
(AW-HE2E)
AC 110Vto240V, 50/60Hz
Power consumption:
12 W
Output:
DC 5.0V, 1.6A
AW-HE2PPJPJYEEJEJY_PDF_mst.book  50 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分