Panasonic Hd Integrated Camera Aw He2 Operating Instructions

31VQT4N15
For AW-HE2E
∫Product identification marking
For Europe
∫EMC Electric and magnetic compatibility
This symbol (CE) is located on the rating plate.
WARNING:
To reduce the risk of fire, electric shock or product damage,
≥Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified service...

32VQT4N15
For the United Kingdom customers
∫Caution for AC mains lead
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety and 
convenience. A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensur e that the replacement fuse has a rating of 
5-ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï  or the BSI mark Ì on the body of the fuse.
If the plug contains...

33VQT4N15
∫Overview
≥This HD camera features single focus, ultra-wide angle 95° lens, and uses a 1/2.33 type 
(1/2.33 z)* HD MOS sensor and digital signal processor (DSP).
* The effective size of the MOS sensor is 1/4.37.
≥ When preset memory is used, digital pan/tilt/zoom functions mean users can flip through 
images in an instant to shoot quietly.
≥ By connecting a controller, the camera operations can be performed smoothly by IP 
control.
≥ By connecting the unit to a personal computer through an IP...

34VQT4N15
Energy-savings achieved by the compact main unit design
≥The main unit is lightweight and compact at less than 244g, and a low 3.6 W energy 
consumption means multiple cameras can be connected easily.
Easy connections and settings courtesy of IP control
≥ Up to a hundred units can be operated by IP connection from a Panasonic controller 
(AW-RP50). (The maximum length of the LAN cables is 100 m (328 ft.).)
AW-HE2PPJPJYEEJEJY_PDF_mst.book  34 ページ  ２０１２年１０月２３日　火曜日　午後５時４３分 

35VQT4N15
Shoot under the proper lighting conditions.
To produce pictures with eye-pleasing colors, shoot under the proper lighting conditions.
The pictures may not appear with their proper colors when shooting under fluorescent lights. 
Select the proper lighting as required.
To ensure a stable performance in the long term
Using the unit for prolonged periods in locations where the temperature and humidity levels 
are high will cause its parts to deteriorate, resulting in a reduction of its service...

36VQT4N15
Do not touch the optical system.
Under no circumstances must they be touched.
In the unlikely event that they have become dusty, remove the dust by using a camera blower 
or by wiping them gently with a lens cleaning paper.
Do not point the camera directly at the sun or a laser beam.
Taking images of the sun, laser beams, or other brightly lit subjects for prolonged periods of 
time may damage the MOS sensor.
Do not use the unit for long periods of time.
Continuous use could cause the unit to...

37VQT4N15
≥If the necessary computer environment is not provided, malfunctions may occur. E.g., 
screen pictures may be slow, or it may not be possible to operate the web browser.
≥ Even if the system requirements mentioned in this Operating Instructions are fulfilled, 
some PCs cannot be used.
*1 Cannot be used with Windows XP Compatibility mode.
*2 Cannot be used with Internet Explorer 8.0 (64 bit).
*3 Does not support Windows XP Professional x64 Edition.
≥ For detailed notes on the use of personal...

38VQT4N15
The settings related to the unit’s network can be established using the Easy IP Setup 
Software supplied. (Only for Windows)
≥To establish the settings for a multiple number of units, the settings must be selected for 
each camera involved.
≥ If settings cannot be set using the Easy IP Setup Software or you are using a Mac, perform 
the unit and PC settings separately using the Network screen on the Web settings screen.
For further details, refer to the “Operating Instructions ”.
≥ For details...

39VQT4N15
3Click the MAC address/IPv4 address of the camera to be set, and 
click the [Network settings] button.
≥When a DHCP server is being used, the IP address allocated to the unit can be checked by 
clicking the [Search] button of the Easy IP Setup Software. 
≥ If IP addresses have been duplicated, the duplicated camera No. is displayed in the [IPv4 
overlap] column of the relevant camera.
≥ Clicking [Access Camera] displays a Live screen of the selected camera.
≥ The IPv4/IPv6 switching function...

40VQT4N15
If you connect the unit with a PC, you can operate the unit and configure the unit’s settings 
from the web setting screen.
For details of the required personal computer environment, refer to page 37.
Starting the Web Setting Screen (Live Screen/Setup 
Screen)
≥ Connect the unit with a PC
≥  Perform the settings for the PC:
jSelect an IP address for the personal computer within the private address range while 
ensuring that it is different from the address of the unit.
j Set the subnet mask for...