Panasonic Hc X920 Owners Manual

							- 131 -
When the preparation above is complete, proceed to “Connecting to a wireless access point”. 
(l 134 )
1 Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or 
IEEE802.11n.
2 Install the smartphone application “Image App” on your smartphone. ( l132 )
3 Check if the smartphone is an Android or iOS device in advance.
When the preparation above is complete, proceed to “Connecting to a wireless access point”. 
( l 134 )
[Home Cam]You can confirm the recording screen of this unit from outside using a 
smartphone.
Caution:
This function is not designed  for anti-theft or disaster use.
Image App 
						

							- 132 -
≥The service may not be able to be used properly depending on the type of smartphone being 
used. For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/e_cam/ (This Site is English only.)
≥ When downloading the app on a mobile network, high packet data fees may be incurred 
depending on the details of your contract.
Install the “Image App”
About the “Image App”
The “Image App” is an application provided by Panasonic.
For Android appsFor iOS apps
Version 1.0 (As of December 2012)
OSAndroid 2.2 ~ Android 4.0 iOS 4.3~ iOS 6.0
Installation 
procedure1Connect your Android 
device to a network.
2 Select “Google Play™ 
Store”.
3 Enter “Image App” into 
the search box.
4 Select “Image App” and 
install it.
≥The icon will be added 
to the menu.
1 Connect your iOS 
device to a network.
2 Select “App Store
SM”.
3 Enter “Image App” into 
the search box.
4 Select “Image App” and 
install it.
≥The icon will be added 
to the menu. 
						

							- 133 -
Acquire a USTREAM ID/Password/Program using a smartphone or a PC.
≥Operation cannot be guaranteed on future USTREAM services and updates.  The service content 
and screens which can be used are subject to change without prior notice. (This service is current 
as of December 2012)
≥ When you connect this unit to a wireless access point ( l134), you can acquire a “LUMIX CLUB” 
Login ID/Password with this unit. ( l157 )
≥ Log in to the “LUMIX CLUB” and register/set up the USTREAM on WEB service link setup.
Acquire a USTREAM ID /Password/Program
About the USTREAM
With this video-sharing website, you can stream and watch motion pictures this unit is recording.
Refer to the USTREAM site for details.
http://www.ustream.tv/
Acquire a “LUMIX CLUB” Login ID/Password
Use linked services with “LUMIX CLUB”
To use the Live Cast, access following website.
http://lumixclub.panasonic.net/eng/c/ 
						

							- 134 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
∫About the status indicator and the connection status icon when 
connected to Wi-Fi
Connecting to a wireless access point
Check if the wireless access point you are using is compatible with WPSjIf the wireless access point is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the wireless access point is not compatible with WPS:
[Manual Connection] ( l136 )
≥ WPS is an abbreviation for Wi-Fi Protected Setup™.
∫ If this is the first time the Wi-Fi button is pressed
1Press Wi-Fi button. 
2Touch [YES].
Wi-Fi [HC-X920]/[HC-X920M]
Connecting to Wi-Fi
If the clock has been set for the first time, the confirmation message for the Wi-Fi settings will be 
displayed. Touch [YES], and then configure the access point settings below.
ALit green
≥ The status indicator is lit green while this unit is 
connected to a destination device after 
completing a Wi-Fi connection.
≥ When Wi-Fi is disconnected, the status 
indicator is lit red again.
B The connection status icon
When connected to wireless access point: 
 connected to Wi-Fi/  not connected to 
Wi-Fi
≥ The display will change as follows 
according to the radio wave intensity: 
 #    #   # .
When directly connectied:   connected to Wi-Fi/  not connected to 
Wi-Fi
[Easy Connection (WPS)]

 
						

							- 135 -
3Touch [Easy Connection (WPS)].
4Set the wireless access point to waiting for WPS.≥For further details, please read the operating instructions for the wireless 
access point.
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch 
[EXIT], and set the connection again.
Enter a PIN code to set the Wi-Fi connection
1 Touch [PIN code] in Step 4.
2 Touch the wireless access point to be connected.
≥If you touch [Refresh], you can search for wireless access points again.3 Touch [ENTER].
4 Enter the PIN code displayed on this unit screen into the wireless access 
point.
≥For further details, please read the operating instructions for the wireless access point.5 Touch [NEXT].≥A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection 
again.
∫ When setting from the Wi-Fi setup menu
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch [Wireless Settings].
4Touch a Blank row.≥For information on how to delete wireless access points or 
change the search order of wireless access points, please 
refer to [Wireless Settings] on page 155 .
5Touch [Easy Connection (WPS)].
6Set the wireless access point to waiting for WPS.≥For further details, please read the operating instructions for the wireless 
access point.
≥ A message is displayed when the connection is complete.
Enter a PIN code to set the Wi-Fi connection
1 Touch [PIN code] in Step 6.
2 Touch the wireless access point to be connected.
≥If you touch [Refresh], you can search for wireless access points again.3 Touch [ENTER].
4 Enter the PIN code displayed on this unit screen into the wireless access 
point.
≥For further details, please read the operating instructions for the wireless access point.

A [Delete]
B [ENTER] 
						

							- 136 -
5Touch [NEXT].≥A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection 
again.
≥ Confirm Encryption key of the selected wireless  access point if the network authentication is 
encrypted.
≥ When connecting by [Manual Setting], confirm the SSID (Identification name), Authentication 
method, Encryption type, and Encryption key (Password) of the wireless access point you are 
using.
∫ If this is the first time the Wi-Fi button is pressed
1Press Wi-Fi button. 
2Touch [YES].
3Touch [Manual Connection].
4Select [Search for wireless network] or [Manual Setting].
∫When setting from the Wi-Fi setup menu
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
When the preparations for the Wi-Fi function ( l129 ) and the Wi-Fi connection are 
complete, you can use the following functions: j[Link to Cell] ( l143)
j [DLNA Play] ( l147 )
j [Live Cast] ( l148 )
j [Home Cam] ( l152 )
[Manual Connection]
[Search for 
wireless network]:Allows you to search for wireless a ccess points, select one, and set it.
( l 137)
[Manual Setting]:Allows you to configure detailed settings by entering the SSID of the 
wireless access point you want to connect to. ( l138 ) 
						

							- 137 -
3Touch [Wireless Settings].
4Touch the part with no display of a wireless 
access point.
≥For information on how to delete wireless access points or 
change the search order of wireless access points, please 
refer to [Wireless Settings] on page 155 .
5Touch [Manual Connection].
6Select [Search for wireless network] or [Manual 
Setting].
∫When connecting by [Search for wireless network]
1Touch [Search for wireless network].
2Touch the wireless access point to be connected.≥If you touch [Refresh], you can search for wireless access points again.
3Touch [ENTER].≥If an Encryption key (Password) is not set, the connection is complete and a message is 
displayed.
4(When there is an Encryption key (Password))
Touch [INPUT], then enter the Password.
≥For details on how to enter characters, refer to page  73.
≥ When the entry is complete, touch [Enter].
5(When there is an Encryption key (Password))
Touch [NEXT].
≥A message is displayed when the connection is complete.
[Search for 
wireless network]:Allows you to search for wireless a ccess points, select one, and set it.
[Manual Setting]:Allows you to configure detailed settings by entering the SSID of the 
wireless access point you want to connect to. ( l138 )
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
When the preparations for the Wi-Fi function ( l129 ) and the Wi-Fi connection are 
complete, you can use the following functions: j[Link to Cell] ( l143)
j [DLNA Play] ( l147 )
j [Live Cast] ( l148 )
j [Home Cam] ( l152 )
A [Delete]
B [ENTER]
 
						

							- 138 -
∫
When connecting by [Manual Setting]
1Touch [Manual Setting].
2Touch [INPUT], then Enter the SSID of the wireless access point.≥For details on how to enter characters, refer to page  73.
≥ When the entry is complete, touch [Enter].
3Touch [NEXT], and then touch the desired Network Authentication method.
≥When [WEP] is selected, proceed according to step 5.
4Touch the desired Encryption method.≥If you select [NONE], a message is disp layed after completing the connection.
5(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
≥For details on how to enter characters, refer to page  73.
≥ When the entry is complete, touch [Enter].
6Touch [NEXT].≥ A message is displayed when the connection is complete.
≥Check the wireless access points instruction manual and settings when a saving wireless access 
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We 
recommend you connect with the strongest possible Encryption method.
≥ If no connection can be established, the wireless access point’s radio waves may be too weak. 
Refer to “Messages” ( l183 ) and “Troubleshooting” ( l185 ) for details.
≥ Transmission speed may decrease, or may not be usable depending on the environment it is 
used in.
Network authentication typeEncryption types that can be set
[Open] [NONE]/[WEP]
[WEP] There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES]
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
When the preparations for the Wi-Fi function ( l129 ) and the Wi-Fi connection are 
complete, you can use the following functions: j[Link to Cell] ( l143)
j [DLNA Play] ( l147 )
j [Live Cast] ( l148 )
j [Home Cam] ( l152 ) 
						

							- 139 -
Connecting to the smartphone
Check if your smartphone is compatible with WPS≥Customers in the US should connect by entering an SSID and Password or scanning the QR 
code.
jIf your smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If your smartphone is not compatible with WPS:
Connect by entering an SSID and Password ( l140 )
You can also connect by scanning the QR code displayed on this unit with a smartphone. ( l140 )
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch [Direct Connection].
4Touch [Change connection type].
5Touch [Easy Connection (WPS)].
6Set the smartphone to WPS Mode.
[Easy Connection (WPS)]
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
When the preparations for the Wi-Fi function ( l129 ) and the Wi-Fi connection are 
complete, you can use the following functions: j[Link to Cell] ( l143) 
						

							- 140 -
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch [Direct Connection].
4Select the SSID displayed on this unit in the Wi-Fi setting of your 
smartphone.
5Enter the Password displayed on this unit in your smartphone.
∫Connecting with QR code
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch [Direct Connection].
4Touch [Change connection type].
5Touch [QR code].≥QR code is displayed on the screen of this unit.
6Start up the smartphone application “Image App”.
7Scan QR code displayed on this unit with the smartphone.≥When using an iOS device, the profile install screen will be displayed on the smartphone. After 
installing, close the displayed screen by pressing the Home button and relaunch the Image App.
≥Transmission speed may decrease, or may not be usable depending on the environment it is 
used in.
Connecting by entering an SSID and Password
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
When the preparations for the Wi-Fi function ( l129 ) and the Wi-Fi connection are 
complete, you can use the following functions: j[Link to Cell] ( l143)
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
Once the Wi-Fi function preparations ( l129) and the Wi-Fi connection are complete, the 
devices image will be displayed on the smartphone screen and you can use [Link to 
Cell]. Please refer to page  143 for details about [Link to Cell].