Panasonic Hc X900 Owners Manual

81VQT4C76
Recording is done continuously at the rate of 60 still pictures per second.
Use this function to record an object with fast movement.
1 Select the menu.
2 Press the   button.
≥ flashes in red during recording.
≥ First press the   button halfway, then press it fully to set the focus and record. It will 
automatically focus if you press fully once, so it is convenient when recording objects 
moving back and forth.
3 Touch [Record] or [Delete].
4
(When [Record] is selected in Step 3)
Touch [REC...

82VQT4C76
Illuminating the subject makes it easier for the camera to focus when recording in low light 
conditions that make focusing difficult.
≥Switch to Manual Mode. ( l83)
≥ The available distance of the AF assist lamp is approx. 1.5 m (5 feet).
≥A conversion lens  (optional) can block the AF assist  lamp, and it will become harder to 
adjust the focus.
≥ When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be 
changed.
You can add a shutter sound when recording still...

83VQT4C76
The operation sequence differs for the LCD monitor and viewfinder.
≥The Manual Focus, White Balance, Shutter Speed, Brightness (Iris and Gain) 
settings are retained when you change between Motion Picture Recording Mode and 
Still Picture Recording Mode.
∫ To switch to Manual Mode
Press the iA/MANUAL button or  the CAMERA FUNCTION button to 
switch to Manual Mode.
Press the iA/MANUAL button to switch to Manual Mode.
≥  appears on the screen.
≥ Press the iA/MANUAL button to cancel manual...

84VQT4C76
∫When using the viewfinder
1Press the CAMERA FUNCTION button to select the desired item.≥Selected item changes whenever the CAMERA FUNCTION button is pressed.
2Rotate the multi manual ring to 
select the setting and press the 
CAMERA FUNCTION button to 
enter the setting.
≥Zoom operation cannot be done using the 
multi manual ring during setting.
White Balance
Automatic White Balance function may not reproduce natural colors depending on the 
scenes or lighting conditions. If so, you can adjust...

85VQT4C76
∫To set the White Balance manually
1 Select  , fill the screen with a white subject.
2 Touch and set the blinking  .
≥
When using the viewfinder, press and hold the 
CAMERA FUNCTION button.
≥ When the screen turns black instantly and the   display 
stops flashing and then lights constantly, the setting is 
complete.
≥ If the   display continues flashing, the White Balance cannot be set. In this case, use 
other White Balance Modes.
≥When the   display flashes, the Manual White Balance...

86VQT4C76
≥When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
≥ To return to auto setting, press the iA/MANUAL button again.
≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then 
set the iris/gain value.
Manual shutter speed adjustment
≥ When the shutter speed is set lower than 1/15 in the Still Picture Recording Mode, using a 
tripod is recommended. Also, White Balance cannot be set. The shutter speed will be set 
to 1/30 when the...

87VQT4C76
1(When MF assist function is used)
Select the menu.
≥Touch   to display the Manual icon.
2Touch [FOCUS].
3Touch [MF] to change to Manual Focus.≥MF appears on the screen.
4
Adjust the focus by rotating the multi 
manual ring.
Adjust the focus by touching  / .
≥Touch [FOCUS] to end the adjustment.
The in-focus area is displayed in blue. The normal screen returns approximately 2 seconds 
after you finish bringing the subject into focus.
≥ When [MF ASSIST] is [OFF], the blue area is not displayed....

88VQT4C76
With the 3D Conversion Lens (optional) attached, you can record lifelike and powerful 3D image.
To view 3D image, a television that supports 3D is required.
≥In the unit, the recordable  3D images are AVCHD 3D format or side-by-side format (2-
screen structure).
≥ Lifelike and powerful 3D full high-definition image can be recorded by recording in AVCHD 
3D format.
≥ Since the 3D image is recorded in side-by-side format, the recorded 3D image is not of 
high-definition picture quality.
≥
Please...

89VQT4C76
4Touch [EXIT] to end the adjustment.
≥Display of the LCD monitor is switched to 3D.
≥ When re-attaching the 3D Conversion Lens or after an impact, etc., it is 
recommended that you perform the adjustment again.
5(When recording motion pictures)
Press the recording start/stop button to start recording. (l 33)≥Start recording after removing the Lens front cap.
≥ [REC MODE] during recording the 3D will be [AVCHD 3D] or [SbS 3D]. ( l68)
(When recording still pictures)
Press the   button to record...

90VQT4C76
∫Functions that cannot be used during 3D recording
When recording with the 3D Conversion Lens, you cannot use certain functions.
*1 The Optical Image Stabilizer   and Optical Image Stabilizer Lock   can be used.
*2 This can be used when the LCD monitor is displaying in 2D.
*3 Only the Digital Zoom (up to 1.5 k) can be used.
*4 Face framing display will be displayed when the LCD monitor or TV output setting is set 
to 2D.
Face framing display will be displayed when the TV output setting is set...