Panasonic Hc X900 Owners Manual

71VQT4C76
Entering text≥The characters can be conveniently input without moving the cursor when the [Auto Cursor 
Position] is set to [ON]. ( l49)
≥ A maximum of 9 characters can be entered.
4 Touch [ENTER] to end registration.≥Touch [EXIT].
∫ Changing the information of a registered person
1 Select the menu.
2 Touch the desired item to enter the setting.
≥Up to 3 face shots can be registered. To additionally register or 
to change/delete the registered face shots, touch   or the 
face shot.
≥
If you...

72VQT4C76
∫Canceling a registered person
1 Select the menu.
≥Touching [DELETE ALL] cancels all the registered people.2(When [DELETE] is selected)Touch the person to cancel.≥When touched, the person is selected and   is displayed. To cancel the selected person, 
touch again.
≥ Touch [ENTER].
≥Since Face Recognition searches for faces that resemble the registered faces, there is no 
guarantee of positive recognition.
≥ It may not be possible to correctly recognize a person who has been registered due to...

73VQT4C76
∫Prioritized face framing
Prioritized face framing is displayed as orang e frames. Focus and adjustment of brightness 
will be performed against the prioritized face framing.
≥ Prioritized face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
≥ Focus will be set to prioritized face framing when the   button is pressed halfway when 
recording still pictures. Prioritized face framing will turn to green when the focus is set....

74VQT4C76
Recording motion pictures with more vivid colors, using x.v.Color™ technology.
≥ Switch to Manual Mode. ( l83)
≥ Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/60p]. ( l68)
≥ For more realistic colors, use an HDMI mini cable (optional) with a TV that supports the 
x.v.Color
™.
≥When motion pictures recorded while this function is turned [ON] are played back 
with a TV not compatible with x.v.Color™, colors may not be reproduced properly.
≥ When these images are played back with devices other...

75VQT4C76
Recording setting of the built-in microphone can be adjusted.
≥If you wish to record higher quality sound and maintain realism even when zooming in, for 
instance, when recording a music recital, we recommend setting [MIC SETUP] to 
[SURROUND].
≥ [MIC SETUP] will become [STEREO MIC] when the [REC MODE] is set to [iFrame].
Directivity of the microphone is interlocked with the zoom operation. Sounds near the front of 
the unit are recorded more clearly if you zoom in (close-up) and surrounding...

76VQT4C76
When recording, the input level from the built-in microphones and the external microphone 
terminal can be adjusted.
When recording, the input level from the built-in microphones can be adjusted.
1 Select the menu.
≥It is possible to select the setting  from the quick menu in Manual Mode. ( l42) The 
microphone level returns to the setting adjusted previously, and it cannot be set from the 
quick menu.
2(When [SET r]/[SET] is selected)
Touch /  to adjust.
≥Touch   to activate/deactivate AGC....

77VQT4C76
≥When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom 
rate.
When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, the 
sound is stereo (2 ch) and only the front-left and front-right input level meters function.
≥ The microphone input level meter shows the largest volume for the microphones.
≥ You cannot record with the audio completely muted.
Change the...

78VQT4C76
Parts where white saturation (color saturation) is likely to 
occur (extremely brightly lit or shiny parts) are displayed 
with diagonal lines (zebra pattern).
≥Switch to Manual Mode. ( l83)
≥ You can record an image with little white saturation if you 
manually adjust the shutter speed or brightness (Iris/Gain) ( l85).
≥ The zebra pattern does not appear on the images actually recorded.
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the...

79VQT4C76
The higher the number of pixels, the higher the clarity of the picture when printing.
≥The number of recording pixels that can be set changes depending on selected screen 
aspect ratio. ( l80)
∫ Picture size and Maximum zoom ratio
* Extra optical zoom cannot be used. The maximum zoom magnification is 12 k.
: [RECORD SETUP] 
# [HISTOGRAM] # desired setting
≥ It is possible to set from the quick menu in Manual Mode. ( l42)
[ON ADJUST]:
Display only when [IRIS] is adjusted. ( l85)
[ALWAYS]:...

80VQT4C76
∫Picture size in Motion Picture Recording Mode
≥Change the mode to  .
≥This function’s default settings are   in Still Picture Recording Mode and   in Motion 
Picture Recording Mode.
≥ The recording will become longer depending on the recording pixels.
≥ Please refer to page 164 about the number of recordable pictures.
This allows you to select the aspect ratio of the pictures to suit printing or the playback 
method.
≥ This function’s default setting is [3:2].
≥ When the aspect ratio is set to...