Panasonic Hc X900 Owners Manual
Here you can view all the pages of manual Panasonic Hc X900 Owners Manual. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
101VQT4C76
Changing the playback settings and playing back the
slide show
1Touch . (l29)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [PLAYBACK SETUP] is selected)
Touch [3D (NO EFFECT)] or [2D].
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [EFFECT SETUP] is selected)
Touch the desired effect.≥When [EFFECT SETUP] is changed, [MUSIC SELECT] will...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-100.png "Page 101
101VQT4C76
Changing the playback settings and playing back the
slide show
1Touch . (l29)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [PLAYBACK SETUP] is selected)
Touch [3D (NO EFFECT)] or [2D].
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [EFFECT SETUP] is selected)
Touch the desired effect.≥When [EFFECT SETUP] is changed, [MUSIC SELECT] will...")
101VQT4C76 Changing the playback settings and playing back the slide show 1Touch . (l29) 2(Only when you would like to change the settings) Touch [SET] to select the item to change. 3(When [DATE SETUP] is selected) Touch the playback date. (When [PLAYBACK SETUP] is selected) Touch [3D (NO EFFECT)] or [2D]. (When [SLIDE INTERVAL] is selected) Touch the interval of playback for the slide show. (When [EFFECT SETUP] is selected) Touch the desired effect.≥When [EFFECT SETUP] is changed, [MUSIC SELECT] will...
Page 102
![Page 102
102VQT4C76
(To test the music audio)
Touch [START] and start the audio testing.≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the playback operation. ( l39)≥When the playback is finished or stopped, the screen to select [REPLAY], [SELECT
AGAIN] or [EXIT] is displayed. Touch the desired item.
¬ Change the mode to .
∫ To delete the scene or still picture being
played back
Touch while scenes or still pictures to...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-101.png "Page 102
102VQT4C76
(To test the music audio)
Touch [START] and start the audio testing.≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the playback operation. ( l39)≥When the playback is finished or stopped, the screen to select [REPLAY], [SELECT
AGAIN] or [EXIT] is displayed. Touch the desired item.
¬ Change the mode to .
∫ To delete the scene or still picture being
played back
Touch while scenes or still pictures to...")
102VQT4C76 (To test the music audio) Touch [START] and start the audio testing.≥Touch the other music option to change the music to be tested. ≥ When you touch [STOP], the music playback stops. 4Touch [START]. 5Select the playback operation. ( l39)≥When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or [EXIT] is displayed. Touch the desired item. ¬ Change the mode to . ∫ To delete the scene or still picture being played back Touch while scenes or still pictures to...
Page 103
![Page 103
103VQT4C76
(When [SINGLE] is selected in Step 2)
Touch the scene/still picture to be deleted.≥Touched scene or still picture is deleted.
4(When [MULTI] is selected in Step 2)
Touch [Delete].
≥To continuously delete other scenes/still pictures, repeat Steps 3-4.
When you stop deleting halfwayTouch [CANCEL] while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled
cannot be restored.
To complete editingTouch [Return].
≥You can also delete scenes by touching...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-102.png "Page 103
103VQT4C76
(When [SINGLE] is selected in Step 2)
Touch the scene/still picture to be deleted.≥Touched scene or still picture is deleted.
4(When [MULTI] is selected in Step 2)
Touch [Delete].
≥To continuously delete other scenes/still pictures, repeat Steps 3-4.
When you stop deleting halfwayTouch [CANCEL] while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled
cannot be restored.
To complete editingTouch [Return].
≥You can also delete scenes by touching...")
103VQT4C76 (When [SINGLE] is selected in Step 2) Touch the scene/still picture to be deleted.≥Touched scene or still picture is deleted. 4(When [MULTI] is selected in Step 2) Touch [Delete]. ≥To continuously delete other scenes/still pictures, repeat Steps 3-4. When you stop deleting halfwayTouch [CANCEL] while deleting. ≥The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editingTouch [Return]. ≥You can also delete scenes by touching...
Page 104
![Page 104
104VQT4C76
5Touch [YES] and confirm (play back) the edited scene.
≥When [NO] is touched, a confirmation message appears. Proceed to Step 7.
6Stop the playback.≥A confirmation message appears.
7Touch [ENTER].
≥To continue deleting parts from other scenes, repeat Steps 2-7.
≥Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when the middle part...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-103.png "Page 104
104VQT4C76
5Touch [YES] and confirm (play back) the edited scene.
≥When [NO] is touched, a confirmation message appears. Proceed to Step 7.
6Stop the playback.≥A confirmation message appears.
7Touch [ENTER].
≥To continue deleting parts from other scenes, repeat Steps 2-7.
≥Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when the middle part...")
104VQT4C76 5Touch [YES] and confirm (play back) the edited scene. ≥When [NO] is touched, a confirmation message appears. Proceed to Step 7. 6Stop the playback.≥A confirmation message appears. 7Touch [ENTER]. ≥To continue deleting parts from other scenes, repeat Steps 2-7. ≥Deleting a part of a scene cannot be performed when there are 99 scenes in a single date. ≥ It may not be possible to delete part of a scene with a short recording time. ≥ The scene will be divided into two scenes when the middle part...
Page 105
![Page 105
105VQT4C76
≥If personal information in the divided scenes is deleted, the personal information is deleted
when the divided scenes are canceled.
Dividing a scene to partially delete (iFrame/MP4)
Divide the iFrame scenes or scenes saved in MP4, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥Change the mode to and touch the play mode select icon. Then, set to [iFrame]
or...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-104.png "Page 105
105VQT4C76
≥If personal information in the divided scenes is deleted, the personal information is deleted
when the divided scenes are canceled.
Dividing a scene to partially delete (iFrame/MP4)
Divide the iFrame scenes or scenes saved in MP4, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥Change the mode to and touch the play mode select icon. Then, set to [iFrame]
or...")
105VQT4C76 ≥If personal information in the divided scenes is deleted, the personal information is deleted when the divided scenes are canceled. Dividing a scene to partially delete (iFrame/MP4) Divide the iFrame scenes or scenes saved in MP4, and delete unnecessary parts. This divides the recorded scenes in two and deletes the front half or back half. The scenes that were deleted after division cannot be recovered. ≥Change the mode to and touch the play mode select icon. Then, set to [iFrame] or...
Page 106
106VQT4C76 Deleting personal information Deletes Face Recognition information from scenes in which faces were recognized. ≥Change the mode to and touch the play mode select icon. Then, select the AVCHD scene. ( l39) ≥ Face Recognition information is not recorded in the scenes recorded in iFrame or the scenes saved as MP4. 1Select the menu. 2Touch the desired scenes with personal information to be deleted.≥ appears at scenes for which faces were recognized. will change to (red) when touched....
Page 107
![Page 107
107VQT4C76
You can combine the relayed scene (l69) in the built-in memory and the continued
scene in the SD card to be one into the SD card.
≥ Change the mode to and touch the play mode select icon. Then, select the
AVCHD scene. ( l39)
1Insert the SD card that was used for Relay Recording.
2Select the menu.
3When the confirmation message appears, touch [YES].
≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are
not deleted.)
4Touch [EXIT] when the relay scene...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-106.png "Page 107
107VQT4C76
You can combine the relayed scene (l69) in the built-in memory and the continued
scene in the SD card to be one into the SD card.
≥ Change the mode to and touch the play mode select icon. Then, select the
AVCHD scene. ( l39)
1Insert the SD card that was used for Relay Recording.
2Select the menu.
3When the confirmation message appears, touch [YES].
≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are
not deleted.)
4Touch [EXIT] when the relay scene...")
107VQT4C76 You can combine the relayed scene (l69) in the built-in memory and the continued scene in the SD card to be one into the SD card. ≥ Change the mode to and touch the play mode select icon. Then, select the AVCHD scene. ( l39) 1Insert the SD card that was used for Relay Recording. 2Select the menu. 3When the confirmation message appears, touch [YES]. ≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not deleted.) 4Touch [EXIT] when the relay scene...
Page 108
108VQT4C76 ≥Use the AV multi cable (supplied) or HDMI mini cable (optional) and check the output settings. ( l110 , 111 ) ≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high-definition TV and then play back the recorded high-definition images, you can enjoy them in high resolution with high quality sound. 1Connect this unit to a TV. Advanced (Playback) Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the...
Page 109
109VQT4C76 ≥Check that the plugs are inserted as far as they go. ≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional). ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required. ≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug of the AV multi cable. Image may not display when the component terminal plug is connected...
Page 110
110VQT4C76 ∫To display the on-screen information on the TV When the EXT DISPLAY button on the remote control is pressed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. ≥It will not display when the unit is turned off. When the menu setting is changed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. * This setting is only available in recording mode. Connecting...