Panasonic Hc X900 Owners Manual

151VQT4C76
≥If recovery fails, turn the unit off and on again after waiting awhile. If recovery fails 
repeatedly, format a media on the unit. Please be aware that if a media is formatted, then 
all the data recorded on the media will be erased.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
∫ It is not a malfunction in following cases
Others
Troubleshooting
A clicking sound is heard 
when the unit is shaken. ≥
This is the sound of the lens moving and is not a...

152VQT4C76
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally.≥
Remove the battery or AC adaptor, wait about 1 minute 
and then reconnect the battery or AC adaptor. Then 
about 1 minute later, turn on the unit again. (Conducting 
the above operation while the media is being accessed 
may damage the data on the media.)
≥ If normal operation is still not restored, detach the power 
connected, and contact consumer support. ( l175, 176, 
177)
“ERROR OCCURRED. 
PLEASE...

153VQT4C76
Color balance of images 
is strange when 
recording in a place 
such as a gymnasium.≥
In a place with multiple light sources, such as a 
gymnasium or a hall, set the White Balance setting to 
 (Indoor mode 2). If you cannot record clearly with the 
 (Indoor mode 2), set it to   (Manual adjustment 
mode). ( l84)
Color or brightness of 
the image changes, or 
you may see horizontal 
bars in the image.
The LCD monitor flickers 
indoors. ≥
Color or brightness of the image may change, or you may...

154VQT4C76
VIERA Link does not 
work.(Setting on this unit)
≥
Connect with a HDMI mini cable (optional). ( l112)
≥ Touch  , then touch [SETUP]  # [VIERA Link]  # 
[ON]. ( l11 2 )
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the 
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the 
connected device.
The power of the DVD 
burner cannot...

155VQT4C76
∫If AVCHD scenes do not change smoothly when played back on 
another device
The images may be still for several seconds at  the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using 
another unit.
≥ Just how smoothly the scenes will be play ed back depends on the playback unit. 
Depending on the unit used, the images may stop moving and become still for a moment 
even when none of the following conditions are...

156VQT4C76
Keep this unit as far away as possible 
from electromagnetic equipment (such 
as microwave ovens, TVs, video games 
etc.).
≥If you use this unit on top of or near a TV, 
the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave 
radiation.
≥ Do not use this unit near cell phones 
because doing so may result in noise 
adversely affecting the pictures and/or 
sound.
≥ Recorded data may be damaged, or 
pictures may be distorted, by strong 
magnetic fields created by...

157VQT4C76
Do not use the unit for surveillance 
purposes or other business uses.
≥This unit was designed for consumer 
intermittent use. It was not intended for 
continuous use, or for any industrial or 
commercial application resulting in 
prolonged use.
≥ In certain situations, continuous use could 
cause the unit to overheat and cause a 
malfunction. Such use is strongly 
discouraged.
When you are not going to use the unit 
for an extended time
≥ When storing the unit in a cupboard or 
cabinet, it is...

158VQT4C76
Prepare spare batteries when going out 
for recording.
≥Prepare batteries enough to last for 3 to 4 
times the period you are planning to 
record for. Cold places such as a ski resort 
can shorten recording time.
If you drop the battery accidentally, 
check to see if the terminals are 
damaged.
≥ Attaching a battery with damaged 
terminals can damage the unit.
Do not throw old battery into fire.
≥ Heating a battery or throwing it into a fire 
may result in an explosion.
If the operating time...

159VQT4C76
About 3D recording
Attach the 3D Conversion Lens securely. 
It must not be used with an insecure 
attachment.
Do not use the 3D Conversion Lens 
without adjusting it first.
≥It will not be possible to record 3D image 
correctly, and this may lead to tiredness or 
discomfort.
≥ When you re-attach the 3D Conversion 
Lens after removing it, we recommend 
making the adjustments again.
With the 3D Conversion Lens attached, 
do not record a subject at less than the 
minimum focus distance.
≥ The 3D...

160VQT4C76
When disposing of or giving away the SD 
card, note that:
≥Formatting and deletion of data on this 
unit or computer only changes the file 
management information and does not 
completely delete the data in the SD card.
≥ It is recommended that the SD card is 
physically destroyed or the SD card is 
physically formatted using this unit when 
disposing of or giving away the SD card.
To physically format the SD card, connect 
the unit via the AC adaptor, select 
[SETUP]  # [FORMAT CARD] # [YES]...