Panasonic Hc X900 Owners Manual
Here you can view all the pages of manual Panasonic Hc X900 Owners Manual. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41VQT4C76
≥The elapsed time for playback indication will be reset to 0h00m00s each scene.
≥ When playing back with [ALL AVCHD] selected, the screen may become black
momentarily at the time the scene switches.
Motion picture compatibility
≥This unit is based on AVCHD 3D/AVCHD Progressive/AVCHD.
AVCHD 3D format
≥
Video signals for the AVCHD 3D that can be played back with this unit are 1920k1080/60i.≥ Do not delete or edit the 3D image recorded on the SD card with this unit using
anything other than...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-40.png "Page 41
41VQT4C76
≥The elapsed time for playback indication will be reset to 0h00m00s each scene.
≥ When playing back with [ALL AVCHD] selected, the screen may become black
momentarily at the time the scene switches.
Motion picture compatibility
≥This unit is based on AVCHD 3D/AVCHD Progressive/AVCHD.
AVCHD 3D format
≥
Video signals for the AVCHD 3D that can be played back with this unit are 1920k1080/60i.≥ Do not delete or edit the 3D image recorded on the SD card with this unit using
anything other than...")
41VQT4C76 ≥The elapsed time for playback indication will be reset to 0h00m00s each scene. ≥ When playing back with [ALL AVCHD] selected, the screen may become black momentarily at the time the scene switches. Motion picture compatibility ≥This unit is based on AVCHD 3D/AVCHD Progressive/AVCHD. AVCHD 3D format ≥ Video signals for the AVCHD 3D that can be played back with this unit are 1920k1080/60i.≥ Do not delete or edit the 3D image recorded on the SD card with this unit using anything other than...
Page 42
![Page 42
42VQT4C76
≥Touch (left side)/ (right side) of
on the Touch Menu to display . (l29)
1Touch .
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by
touching / .
4Touch the desired item to enter
the setting.
5Touch [EXIT] to exit the menu
setting.
∫ About guide display
After touching , touching the submenus
and items will cause function descriptions and
settings confirmation messages to appear.
≥After the messages have been displayed,
the guide display is...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-41.png "Page 42
42VQT4C76
≥Touch (left side)/ (right side) of
on the Touch Menu to display . (l29)
1Touch .
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by
touching / .
4Touch the desired item to enter
the setting.
5Touch [EXIT] to exit the menu
setting.
∫ About guide display
After touching , touching the submenus
and items will cause function descriptions and
settings confirmation messages to appear.
≥After the messages have been displayed,
the guide display is...")
42VQT4C76 ≥Touch (left side)/ (right side) of on the Touch Menu to display . (l29) 1Touch . 2Touch the top menu A. 3Touch the submenu B. ≥Next (previous) page can be displayed by touching / . 4Touch the desired item to enter the setting. 5Touch [EXIT] to exit the menu setting. ∫ About guide display After touching , touching the submenus and items will cause function descriptions and settings confirmation messages to appear. ≥After the messages have been displayed, the guide display is...
Page 43
![Page 43
43VQT4C76
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
Set the display method for the screen information display.
Please refer to page 30.
It is possible to display and record the time at the travel destination by selecting your home
region and the travel destination.
1 Touch [SET WORLD TIME].≥If the clock is not set, adjust the clock to the current time. ( l30)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER]...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-42.png "Page 43
43VQT4C76
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
Set the display method for the screen information display.
Please refer to page 30.
It is possible to display and record the time at the travel destination by selecting your home
region and the travel destination.
1 Touch [SET WORLD TIME].≥If the clock is not set, adjust the clock to the current time. ( l30)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER]...")
43VQT4C76 ≥The items displayed differ depending on the position or settings of the mode switch. Select the menu. Set the display method for the screen information display. Please refer to page 30. It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Touch [SET WORLD TIME].≥If the clock is not set, adjust the clock to the current time. ( l30) ≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER]...
Page 44
![Page 44
44VQT4C76
≥When the home region is set for the first time, the screen for selecting home/travel
destination appears after setting the home region successively. If the home region has
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your travel
destination)
Touch / to select your travel
destination and touch [ENTER].
≥Touch [DAYLIGHT SAVING] to set daylight
saving time. appears and the
summer time setting is turned on. The travel
destination time...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-43.png "Page 44
44VQT4C76
≥When the home region is set for the first time, the screen for selecting home/travel
destination appears after setting the home region successively. If the home region has
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your travel
destination)
Touch / to select your travel
destination and touch [ENTER].
≥Touch [DAYLIGHT SAVING] to set daylight
saving time. appears and the
summer time setting is turned on. The travel
destination time...")
44VQT4C76 ≥When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region successively. If the home region has already been set once, execute the menu operation for Step 1. 5(Only when setting the region of your travel destination) Touch / to select your travel destination and touch [ENTER]. ≥Touch [DAYLIGHT SAVING] to set daylight saving time. appears and the summer time setting is turned on. The travel destination time...
Page 45
![Page 45
45VQT4C76
Please refer to page 110.
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in
following cases:
j Using the AC adaptor*
j Using the USB cable for PC, DVD burner etc.
j PRE-REC is used
j During slide show playback
* When [ECONOMY (AC)] is activated, this unit automatically turns off.
When about 30 minutes have passed without any operation while...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-44.png "Page 45
45VQT4C76
Please refer to page 110.
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in
following cases:
j Using the AC adaptor*
j Using the USB cable for PC, DVD burner etc.
j PRE-REC is used
j During slide show playback
* When [ECONOMY (AC)] is activated, this unit automatically turns off.
When about 30 minutes have passed without any operation while...")
45VQT4C76 Please refer to page 110. When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. ≥This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following cases: j Using the AC adaptor* j Using the USB cable for PC, DVD burner etc. j PRE-REC is used j During slide show playback * When [ECONOMY (AC)] is activated, this unit automatically turns off. When about 30 minutes have passed without any operation while...
Page 46
![Page 46
46VQT4C76
≥Change the mode to or .1 Set [QUICK START] to [ON].
2 Close the LCD monitor and retract the viewfinder.
The status indicator A flashes green and the unit goes into Quick Start Standby Mode.
≥ The lens cover does not close.
3 Open the LCD monitor or extend the viewfinder.
The status indicator A lights red and the unit is put into recording pause.
≥Quick Start Standby Mode is canceled if
jabout 5 minutes elapsed
j mode is set to
≥ Depending on the recording conditions and me nu settings,...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-45.png "Page 46
46VQT4C76
≥Change the mode to or .1 Set [QUICK START] to [ON].
2 Close the LCD monitor and retract the viewfinder.
The status indicator A flashes green and the unit goes into Quick Start Standby Mode.
≥ The lens cover does not close.
3 Open the LCD monitor or extend the viewfinder.
The status indicator A lights red and the unit is put into recording pause.
≥Quick Start Standby Mode is canceled if
jabout 5 minutes elapsed
j mode is set to
≥ Depending on the recording conditions and me nu settings,...")
46VQT4C76 ≥Change the mode to or .1 Set [QUICK START] to [ON]. 2 Close the LCD monitor and retract the viewfinder. The status indicator A flashes green and the unit goes into Quick Start Standby Mode. ≥ The lens cover does not close. 3 Open the LCD monitor or extend the viewfinder. The status indicator A lights red and the unit is put into recording pause. ≥Quick Start Standby Mode is canceled if jabout 5 minutes elapsed j mode is set to ≥ Depending on the recording conditions and me nu settings,...
Page 47
![Page 47
47VQT4C76
Please refer to page 52.
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the Self-timer is counting down.
The recording lamp lights up during recording and flashes when the Self-timer is counting
down.
When this is set to [OFF], it does not light during recording.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
2 Beeps for 4 times
When an error occurs, follow...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-46.png "Page 47
47VQT4C76
Please refer to page 52.
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the Self-timer is counting down.
The recording lamp lights up during recording and flashes when the Self-timer is counting
down.
When this is set to [OFF], it does not light during recording.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
2 Beeps for 4 times
When an error occurs, follow...")
47VQT4C76 Please refer to page 52. The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the Self-timer is counting down. The recording lamp lights up during recording and flashes when the Self-timer is counting down. When this is set to [OFF], it does not light during recording. Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound. 2 Beeps for 4 times When an error occurs, follow...
Page 48
![Page 48
48VQT4C76
This makes it easier to view the LCD monitor in bright places including outdoors.
≥These settings will not affect the images actually recorded.
≥ It is possible to set from the quick menu. ( l42)
* It is not displayed in the Manual Mode or in the Playback Mode.
≥ When the AC adaptor is in use, the LCD monitor is set to [ON] automatically.
When the AC adaptor is in use, the LCD monitor is set to automatically.
≥ When the LCD monitor is bright, the recordable time with the battery will be...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-47.png "Page 48
48VQT4C76
This makes it easier to view the LCD monitor in bright places including outdoors.
≥These settings will not affect the images actually recorded.
≥ It is possible to set from the quick menu. ( l42)
* It is not displayed in the Manual Mode or in the Playback Mode.
≥ When the AC adaptor is in use, the LCD monitor is set to [ON] automatically.
When the AC adaptor is in use, the LCD monitor is set to automatically.
≥ When the LCD monitor is bright, the recordable time with the battery will be...")
48VQT4C76 This makes it easier to view the LCD monitor in bright places including outdoors. ≥These settings will not affect the images actually recorded. ≥ It is possible to set from the quick menu. ( l42) * It is not displayed in the Manual Mode or in the Playback Mode. ≥ When the AC adaptor is in use, the LCD monitor is set to [ON] automatically. When the AC adaptor is in use, the LCD monitor is set to automatically. ≥ When the LCD monitor is bright, the recordable time with the battery will be...
Page 49
![Page 49
49VQT4C76
Please refer to page 110.
Please refer to page 112.
Please refer to page 109.
Please refer to page 115.
Please refer to page 118.
Set to [YES] for changing the menu settings back to the default condition.
≥Settings for [MEDIA SELECT]
*, [CLOCK SET] and [LANGUAGE] will not be changed.
* For users who have , this menu is not displayed.
The entered character is confirmed in approx. 1 second after character input, and the cursor
is moved to the right.
It makes the input easy without moving the...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-48.png "Page 49
49VQT4C76
Please refer to page 110.
Please refer to page 112.
Please refer to page 109.
Please refer to page 115.
Please refer to page 118.
Set to [YES] for changing the menu settings back to the default condition.
≥Settings for [MEDIA SELECT]
*, [CLOCK SET] and [LANGUAGE] will not be changed.
* For users who have , this menu is not displayed.
The entered character is confirmed in approx. 1 second after character input, and the cursor
is moved to the right.
It makes the input easy without moving the...")
49VQT4C76 Please refer to page 110. Please refer to page 112. Please refer to page 109. Please refer to page 115. Please refer to page 118. Set to [YES] for changing the menu settings back to the default condition. ≥Settings for [MEDIA SELECT] *, [CLOCK SET] and [LANGUAGE] will not be changed. * For users who have , this menu is not displayed. The entered character is confirmed in approx. 1 second after character input, and the cursor is moved to the right. It makes the input easy without moving the...
Page 50
![Page 50
50VQT4C76
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l123, 136)≥When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. ( l160)
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
Please be aware that...](http://img.usermanuals.tech/thumb/58/64328/w300_hc-x900_mul_om_d-49.png "Page 50
50VQT4C76
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l123, 136)≥When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. ( l160)
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
Please be aware that...")
50VQT4C76 Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l123, 136)≥When formatting is complete, touch [EXIT] to exit the message screen. ≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred. ( l160) ≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to vibrations or shock. Please be aware that...