Panasonic Hc V720 Owners Manual

- 131 -
∫
When setting from the Wi-Fi setup menu
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch [Wireless Settings].
4Touch the part with no display of a wireless 
access point.
≥For information on how to delete wireless access points or 
change the search order of wireless access points, please 
refer to [Wireless Settings] on page 151 .
5Touch [Manual Connection].
6Select [Search for wireless network] or [Manual 
Setting].
∫When connecting by [Search for wireless network]
1Touch [Search for...

- 132 -
∫
When connecting by [Manual Setting]
1Touch [Manual Setting].
2Touch [INPUT], then enter the SSID of the wireless access point.≥For details on how to enter characters, refer to page  65.
≥ When the entry is complete, touch [Enter].
3Touch [NEXT], and then touch the desired Network Authentication method.
≥When [WEP] is selected, proceed according to step 5.
4Touch the desired Encryption method.≥If you select [NONE], a message is disp layed after completing the connection.
5(When selecting...

- 133 -
Connecting to a smartphone
Check if your smartphone is compatible with WPS.≥Customers in the US should connect by entering an SSID and Password or scanning the QR 
code.
jIf your smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If your smartphone is not compatible with WPS:
Connect by entering an SSID and Password
You can also connect by scanning the QR code displayed on this unit with a smartphone. ( l134 )
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch...

- 134 -
∫
Connecting with QR code
1Press Wi-Fi button 
2Touch [Wi-Fi Setup].
3Touch [Direct Connection].
4Touch [Change connection type].
5Touch [QR code].≥QR code is displayed on the screen of this unit.
6Start up the smartphone application “Image App”.
7Scan QR code displayed on this unit with a smartphone.≥When using an iOS device, the profile install screen will be displayed on the smartphone. After 
installing, close the displayed screen by pressing the Home button and relaunch the “Image App”....

- 135 -
Please refer to the operating instruction of the device in use for details about the setting of the 
wireless access point or smartphone.
If the Wi-Fi connection cannot be established
ProblemCheck points
It cannot connect to the 
wireless access point.
The wireless access point 
is not detected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi 
connection will be aborted.
Reset the...

- 136 -
ProblemCheck points
The Wi-Fi connection is 
not possible between this 
unit and a smartphone.
(Wireless Access Point Connection)
≥ Make sure the smartphone is properly connected to the 
wireless access point by checking the Wi-Fi settings of the 
smartphone.
≥ Make sure this unit and the smartphone are connected to the 
same wireless access point.
≥ Make sure the wireless access point is registered in this unit. 
(l 151 )
(Direct Connection)
≥ Make sure the smartphone is properly connected to...

- 137 -
Using a smartphone, you can perform record/playback operations from a remote location or upload 
motion pictures and still pictures recorded in this unit on SNS (Social Networking Service).
AWhen connecting to a smartphone
B When connecting to a wireless access point
≥Refer to [Help] in the “Image App” menu for further details on how to operate.
∫ If the device is Android (NFC-compatible)
≥Turn on the NFC function of your smartphone.
Using the NFC (Near Field Communication) function, you can...

- 138 -
≥This unit will be turned on if it is touched on the   by a smartphone even when this unit was 
turned off using the LCD screen.
If you touch the second smartphone when this unit has already been connected 
to the first one
The remote operation with the first smartphone that  has been connected to this unit will be cut off, 
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the 
smartphone during remote...

- 139 -
∫
If the device is Android (NFC-compatible)
≥Turn on the NFC function.
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a 
Wi-Fi connection between this unit and the smartphone.
≥ This function can be used with the NFC compatible device with Android (OS version 2.3.3 or 
later). (Except for some models)
1Connect the smartphone to a wireless access point.≥When you connect using NFC for the first time,  please make connection of this unit and a 
wireless...

- 140 -
Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback 
Mode.
* The screen differs depending on the operating system.
Screen display during remote operations
Recording screen
1 Remaining battery power of this unit
2 Zoom
3 Photoshot button
4 Menu display
5 Playback mode button
6 Recording mode button
7 Recording start/stop button
8 Motion Picture Recording Mode/Still Picture Recording 
Mode toggle button
9 Name of the connected device
Playback screen
1 Number...