Panasonic Hc V720 Owners Manual

- 141 -
∫
When Recording Mode
≥Turning the unit off
≥ Selecting a mode
≥ Recording motion pictures/still pictures
≥ Selecting a media to record
≥ Using the zoom (Available in the medium or fast speed)
≥ Selecting a iA/MNL mode
≥ White Balance
≥ Recording format
≥ Backlight Compensation
≥ Picture size
≥ Aspect Ratio
≥ Self-timer
∫ When Playback Mode
≥Playback
jThe scenes recorded in iFrame cannot playback
≥ Selecting a media to playback (SD card/Built-in memory)
≥ Switching the media (AVCHD/MP4/still...

- 142 -
Connecting this unit to a DLNA-compatible device via Wi-Fi, you can play back scenes and still 
pictures on the device.
ADLNA-compatible TV
1Press Wi-Fi button. 
2Touch [DLNA Play].≥If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is canceled.
≥ When the connection is complete, the screen of this unit turns off. To display it again, touch the 
screen.
3Select this unit (SSID) by...

- 143 -
You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” 
and USTREAM.
1Press Wi-Fi button. 
2Touch [Live Cast].≥If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them 
according to the screen.
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
∫ To...

- 144 -
To u c h  .≥/ /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To start the live broadcast
Touch .≥If you press the start recording button, you can simultaneously 
record the broadcast to this unit.
≥ / /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To stop the live broadcast
Touch .≥When   (gray) is displayed, unsent data is present....

- 145 -
≥Recording is performed in Intelligent Auto Mode.
≥ If you close the LCD monitor face down while recording, the LCD monitor of this unit will not 
display.
≥ Image content may be leaked to third parties depending on the USTREAM image publication 
method settings. Set the publication range and Password using USTREAM if required.
≥ Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when 
you use this function. Use at your own risk.
Touch   to display the live...

- 146 -
∫
To set the image quality
1 Touch [IMAGE QUALITY].
2 Touch the desired image quality.
≥Frame rate in parentheses are when recorded in simultaneously.
≥ If the selected image quality has an image quality higher than the one you are using, images will 
appear as if the frame rate is low.
∫ To save in USTREAM
1 Touch [Save in USTREAM].
2 Touch [ON] or [OFF].
∫To set the image quality of a motion picture you simultaneously 
broadcast and record
1 Touch [REC MODE].
2 Touch desired recording mode.
∫...

- 147 -
You can confirm the recording screen of this unit from outside using a smartphone.
≥Perform the monitoring operation on the smartphone. ( l149 )
≥ If this is the first time you are configuring the home monitor settings, please read page  148.
∫Connecting with Android (NFC-compatible) device
≥Turn on the NFC function.
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a 
Wi-Fi connection between this unit and the smartphone.
≥ This function can be used...

- 148 -
∫
If the device is Android (n on-NFC-compatible) or iOS
1Press Wi-Fi button and touch [Home Cam]. 
2Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance sc reen is displayed, select [NO].
≥ Use the smartphone to start home monitor.
When configuring the home monitor settings for the first time
∫ Connecting with Android (NFC-compatible) device
≥Turn on the NFC function.
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a...

- 149 -
∫
When configuring the home monitor settings using QR code
1Press Wi-Fi button. 
2Touch [Home Cam].
3Touch [QR code].≥QR code is displayed on the screen of this unit.
4Start up the smartphone application “Image App”.
5Display the screen of a connection setup to home monitor from the menu of a 
smartphone.
6Scan QR code displayed on this unit with a smartphone.≥A confirmation screen is displayed on the screen of a smartphone. Touch [YES] to start home 
monitor.
To exit home monitoring:Touch [EXIT]...

- 150 -
Automatic recordingYou can record a motion picture on this unit as it detects a moving or non-moving object.
≥ Automatic recording will record for approximately 30 seconds.
≥ Automatic recording can record a maximum of 1 hour 15 minutes per day. Check the remaining 
available recording time.
≥ When automatic recording is performed with moving object detection, automatic recording is 
performed only once within the set time.
≥ When automatic recording is performed with non-moving object detection,...