Panasonic Hc V720 Owners Manual

- 171 -
B
PRE-REC ( l57)
Time Lapse Recording 
(l45)
//Bass Setting (
l73)
Zoom Microphone (l 71)
Focus Microphone (l71)
Stereo Microphone (
l71)
Wind Noise Canceler ( l70)
///
Power LCD ( l35)
// / /
Image Stabilizer ( l41)/Optical Image 
Stabilizer Lock ( l55)
Picture Adjustment ( l73)
Digital Cinema Color ( l69)
Brightness Adjustment 
(Miniature Effect/8mm movie/
Silent movie) ( l44, 45 )
Vividness Adjustment 
(Miniature Effect) ( l44)
Color balance Adjustment 
(8mm movie) ( l45)
AF/AE tracking (l...

- 172 -
∫
Playback indications ∫/
Indication of connection to 
Wi-Fi
∫ Indication of connection to 
USB HDD
∫ Indication of connection to 
other devices
∫ Confirmatory indications
1/;/ 5 // 6// 7/8/9 /: /
D /E /;1 /2;
Display during playback ( l28, 78 )
0h00m00s Playback Time ( l28)
No.10 Scene Number
Repeat Playback (l 80)
Resume Playback ( l81)
100-0001 Still picture folder/file name
Transfer/Protected motion 
pictures/still pictures ( l96, 
11 9 )
////
Play mode selection display ( l27)
1080/60p...

- 173 -
Major confirmation/error messages to be indicated on the screen in text.
*1  only
*2 /  only
Others
Messages
PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.*1
We recommend backing up important recorded motion pictures and still pictures periodically to 
a PC, DVD disc etc. to protect it. (l157 ) This message does not indicate that there is a 
problem with this unit.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion...

- 174 -
About recovery
If faulty management information is found, the messages may appear and a repair is performed. 
(Repairing may take time depending on the error.)
≥   is displayed when abnormal management information is detected when the scenes are 
displayed in thumbnail.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ If recovery fails, it will not be possible to play back scenes recorded...

- 175 -
∫
It is not a malfunction in following cases
Others
Troubleshooting
A clicking sound is heard 
when the unit is shaken. ≥
This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned on 
and change the mode to   or  .
Object seems to be 
warped. ≥
Object seems to be warped slightly when the object moves 
across the image very fast, but this is because the unit is 
using MOS for the image sensor. This is not a malfunction.
White round spots...

- 176 -
“ERROR OCCURRED. 
PLEASE TURN UNIT OFF, 
THEN TURN ON AGAIN.” 
is displayed.≥
The unit has automatically detected an error. Restart the unit 
by turning the unit off and on.
≥ The unit will be turned off in about 1 minute if the unit is not 
turned off and on.
≥ Repair is needed if it is repeatedly displayed even if it is 
restarted. Detach the power connected, and consult the 
dealer who you purchased this unit from. Do not attempt to 
repair the unit by yourself.
Indication
ProblemCheck points...

- 177 -
Recording
ProblemCheck points
The unit arbitrarily stops 
recording. ≥
Use an SD card that can be used for motion picture recording. 
(l 13)
≥ The recordable time may have shortened due to the 
deterioration of the data writing speed or repeated recording 
and deletion. Using the unit, format the SD card or built-in 
memory. (l 37)
≥ If [AGS] is [ON], record in the normal horizontal position or set 
[AGS] to [OFF]. ( l69)
Auto Focus function does 
not work. ≥
Switch to Intelligent Auto Mode or...

- 178 -
With other products
ProblemCheck points
Although this unit is 
correctly connected to a 
TV, images or sounds 
cannot be seen.
The images are squeezed 
horizontally. ≥
Please read the operating instructions of your TV and select 
the channel that matches the input used for the connection.
≥ Change the [TV ASPECT] setting to match the aspect ratio of 
the TV. ( l101 )
≥ The audio during playback mode is not output from this unit 
when connected to a TV. Sound levels cannot be adjusted 
using this...

- 179 -
With a PC
ProblemCheck points
When connected by the 
USB cable, this unit is not 
detected by the PC. ≥
After re-inserting the SD card into the unit, reconnect the 
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. ( l161 , 169)
≥ Connect the supplied USB cable again after restarting the PC 
and turning on this unit again.
When the USB cable is 
disconnected, an error 
message will appear on 
the PC. ≥
To disconnect the USB cable safely, double-click...

- 180 -
I have forgotten the 
password for the Wi-Fi.≥
Perform [Reset Wi-Fi Settings] from the Setup menu ( l36). 
This will set the Wi-Fi setting to the condition at the time of 
purchase, and you will be able to use the Wi-Fi setting menu. 
When performing [Reset Wi-Fi Settings], all Wi-Fi settings 
including the “LUMIX CLUB” login ID and registered wireless 
access points will be deleted.
I have forgotten the login 
ID or password for the 
“LUMIX CLUB”. ≥
Check the information in the login screen of...