Panasonic Hc V720 Owners Manual

- 81 -
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was 
stopped.
If playback of a motion picture is stopped,   appears on the thumbnail view of the stopped 
scene.
≥The memorized resume position is cleared if you turn off the unit or change the mode. (The 
setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback 
(Playback zoom)
You can zoom in by touching a still picture during playback.
1Touch and...

- 82 -
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1Touch the date select icon. (l17)
2Touch the playback date.The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3Touch the scene or the still picture to be played back.
≥Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode is 
changed.
≥ In cases such as those described...

- 83 -
Highlight Playback
Part that was recognized as clearly recorded is extracted from multiple scenes, and it can be played 
back or stored in a short time with effects and music added.
It is also possible to create an original Highlight Playback by checking your favorite scenes and 
setting up to extract those scenes.
≥ Highlight Playback cannot be used for iFrame scenes and scenes saved in MP4.
1To u c h  .  (l17 )
2Touch the desired effect.
≥The scenes matching the effect will be extracted and...

- 84 -
∫
Setting up the custom effect
It is possible to enjoy the Highlight Playback with your favorite effect by setting up the combination 
of an image effect and music.
1 Touch [CUSTOM].
2 Touch [EFFECT SETUP] or [MUSIC SELECT].
3 (When [EFFECT SETUP] is selected)
Touch the desired effect.
≥When [EFFECT SETUP] is changed, [MUSIC SELECT] 
will be set the same as [EFFECT SETUP]. (To set 
[EFFECT SETUP] and [MUSIC SELECT] to different 
settings, change [MUSIC SELECT] after setting [EFFECT SETUP].)
(When...

- 85 -
Touch [SET] to select the item to change.
∫Scene setting
1 (Only when Highlight Playback is started from [ALL AVCHD])
Touch the recording format of the scene to be played back.
2 Touch [SELECT DATE] or [SELECT SCENES].
3 (When [SELECT DATE] is selected)
Touch the date to be played back.
≥A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded by red. Touch the date again to cancel the 
operation.
(When [SELECT SCENES] is selected)
Touch the scenes to be played...

- 86 -
∫
Checking the favorite scenes
1 Touch the scenes to be played back.
2 Touch [Add] and add the favorite part.
≥Approximately 4 seconds before and after touching [Add] will 
be added as favorite.
≥ Number of favorite scenes that can be added are 1 to 14. 
(Number of scenes that can be added differs depending on 
the scenes selected.)
≥ Favorite check display  ( A) is displayed in orange, and 
favorite check display  B is displayed on the slide bar.
≥ To cancel the favorite, play back to the...

- 87 -
∫
Priority settings
1 Touch [FACE] or [FACE RECOG.].≥If you touch [FACE], any detected face, including the face of person registered for Face 
Recognition, is given priority on playback.
2 (When [FACE RECOG.] is selected)
Touch a face to specify.
≥You can specify up to 6 faces, which are to be played back in priority.
≥ When touched, the registered face is selected and surrounded by red. Touch the registered face 
again to cancel the operation.
≥ Touch [ENTER]. When a single face is specified, the...

- 88 -
The scenes put together as a Highlight Playback can be saved as a single scene./
The recorded scenes can be saved in the SD card.
The recorded scenes can be saved in the built-in memory.
1 Stop the playback of the Highlight Playback or wait until the Highlight 
playback is finished.
2 To u c h  [ S AV E ] .
3 Select the format to save.
≥When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/60p are converted to 1080/60i 
(picture quality [HA] of [REC MODE]) and saved.
≥ If you select...

- 89 -
Changing the playback settings and playing back the 
slide show
1To u c h  .  (l17)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [PLAYBACK SETUP] is selected)
Touch [3D (NO EFFECT)] or [2D].
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
[DATE SETUP]:Select the date to be played back.
[PLAYBACK SETUP]:Select to play back in 3D (2D still pictures...

- 90 -
(When [EFFECT SETUP] is selected)
Touch the desired effect.
≥When [EFFECT SETUP] is changed, [MUSIC SELECT] will be 
set the same as [EFFECT SETUP]. (To set [EFFECT SETUP] 
and [MUSIC SELECT] to different settings, change 
[MUSIC SELECT] after setting [EFFECT SETUP].)
≥ [SLIDE INTERVAL] cannot be set, when [
EFFECT SETUP] is set.
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music...