Panasonic Hc V520 Owners Manual

- 91 -
Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥Change the mode to   and touch the play mode select icon. Then, select the AVCHD 
scene. ( l27)
1Select the menu.
2Touch the scene with a part to delete.
3Set the section to delete by touching and sliding 
the top and bottom section selection buttons  .
≥It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. ( l76)
4Touch [ENTER].
5Confirm (play back) the...

- 92 -
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene. 
Any unwanted parts in the scene can be deleted after dividing.
≥Change the mode to   and touch the play mode select icon. Then, select the AVCHD 
scene. ( l27)
1Select the menu.
2Touch the scene to be divided.
3Touch   to set the dividing point.≥It is convenient to use Slow-motion Playback and Frame-by-frame 
Playback. ( l76)
≥ Touch [YES] to continue dividing the same scene. To continue 
dividing other scenes, touch [NO] and...

- 93 -
Dividing a scene to partially delete (iFrame/MP4)
Divide the iFrame scene or the scene saved as MP4, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes deleted by dividing cannot be restored.
≥Change the mode to   and touch the play mode select icon. Then, set to [iFrame] or 
[MP4]. ( l27)
1Select the menu.
2Touch the scene to be divided.
3Touch   to set the dividing point.≥It is convenient to use Slow-motion Playback and...

- 94 -
Deleting personal information
Deletes Face Recognition information from scenes in which faces were recognized.
≥Change the mode to   and touch the play mode select icon. Then, select the AVCHD 
scene. ( l27)
≥ Face Recognition information is not recorded in the scenes recorded in iFrame or the 
scenes saved as MP4.
1Select the menu.
2Touch the desired scenes with personal information to be deleted.≥  appears at scenes for which faces were recognized.   will change to   (red) when 
touched. Touch...

- 95 -
Before copying, convert the scenes recorded in AVCHD to those with the image quality (MP4: 
640k360/30p) that supports playback on a PC or uploading on the internet.
≥ Set the mode to  , touch the play mode selection icon, and then select the AVCHD 
scene. ( l27)
1Select the menu.
2Touch the scene you want to convert to MP4.≥The scene selection is made as you touch it, and the   indication appears on the thumbnail. To 
cancel the operation, touch the scene again.
≥ You can select up to 99 scenes...

- 96 -
You can combine the relayed scene (l63) in the built-in memory and the continued scene in 
the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay Recording
≥ Change the mode to   and touch the play mode select icon. Then, select the AVCHD 
scene. ( l27)
1Insert the SD card that was used for Relay Recording.
2Select the menu.
3When the confirmation message appears, touch [YES].≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are...

- 97 -
To cancel relay information
≥When the relay information is canceled, combining of the relayed scenes will not be possible 
anymore.
≥The personal information of the relayed scene in the built-in memory or SD card is deleted, the 
personal information of the combined relay scene is deleted. : [EDIT SCENE] 
# [RELAY INFO CANCEL]
Combining of the relay scene cannot be performed if the available space on the SD card is less 
than the volume of the relayed scene in the built-in memory. It is...

- 98 -
≥Use the HDMI mini cable (supplied).
≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high-
definition TV and then play back the recorded high-definition images, you can enjoy them in high 
resolution with high quality sound.
1Connect this unit to a TV.
≥Check that the plugs are inserted as far as they go.
≥ Always use the supplied HDMI mini cable or a genuine Panasonic HDMI mini cable 
(RP-CDHM15, RP-CDHM30: optional).
Advanced (Playback)
Watching...

- 99 -
2Select the video input on the TV.≥Example:
Select the [HDMI] channel with a HDMI mini cable.
Select the [Video 2] channel with a Composite video cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more 
information, please read the operating instructions for the TV.)
3Change the mode to   to play back.≥When connected to the TV, sound in Playback Mode is not output from this unit. Also,...

- 100 -
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
≥[AUTO] determines the output resolution automatically based on information from the connected 
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], 
[1080i] or [480p] which enables the images to be displayed on your TV. (Please read the 
operating instructions for the TV.)
≥ Images may not be displayed on the television for  several seconds in some cases, such as when...