Panasonic Hc V520 Owners Manual
Have a look at the manual Panasonic Hc V520 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
- 86 -
The scenes put together as a Highlight Playback can be saved as a single scene./
The recorded scenes can be saved in the SD card.
The recorded scenes can be saved in the built-in memory.
1 Stop the playback of the Highlight Playback or wait until the Highlight
Playback is finished.
2 To u c h [ S AV E ] .
3 Select the format to save.
≥When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/60p are converted to 1080/60i
(picture quality [HA] of [REC MODE]) and saved.
≥ If you select...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-85.png "Page 86
- 86 -
The scenes put together as a Highlight Playback can be saved as a single scene./
The recorded scenes can be saved in the SD card.
The recorded scenes can be saved in the built-in memory.
1 Stop the playback of the Highlight Playback or wait until the Highlight
Playback is finished.
2 To u c h [ S AV E ] .
3 Select the format to save.
≥When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/60p are converted to 1080/60i
(picture quality [HA] of [REC MODE]) and saved.
≥ If you select...")
![Page 87
- 87 -
Changing the playback settings and playing back the
slide show
1To u c h . (l17)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [PLAYBACK SETUP] is selected)Touch [3D (NO EFFECT)] or [2D].
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
[DATE SETUP]:Select the date to be played back.
[PLAYBACK SETUP]:Select to play back in 3D (2D still pictures are...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-86.png "Page 87
- 87 -
Changing the playback settings and playing back the
slide show
1To u c h . (l17)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [PLAYBACK SETUP] is selected)Touch [3D (NO EFFECT)] or [2D].
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
[DATE SETUP]:Select the date to be played back.
[PLAYBACK SETUP]:Select to play back in 3D (2D still pictures are...")
![Page 88
- 88 -
(When [EFFECT SETUP] is selected)
Touch the desired effect.
≥When [EFFECT SETUP] is changed, [MUSIC SELECT] will be
set the same as [EFFECT SETUP]. (To set [EFFECT SETUP]
and [MUSIC SELECT] to different settings, change
[MUSIC SELECT] after setting [EFFECT SETUP].)
≥ [SLIDE INTERVAL] cannot be set, when [EFFECT SETUP] is set.
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-87.png "Page 88
- 88 -
(When [EFFECT SETUP] is selected)
Touch the desired effect.
≥When [EFFECT SETUP] is changed, [MUSIC SELECT] will be
set the same as [EFFECT SETUP]. (To set [EFFECT SETUP]
and [MUSIC SELECT] to different settings, change
[MUSIC SELECT] after setting [EFFECT SETUP].)
≥ [SLIDE INTERVAL] cannot be set, when [EFFECT SETUP] is set.
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music...")
![Page 89
- 89 -
¬Change the mode to .
∫ To delete the scene or still picture being played back
Touch while scenes or still pictures to be deleted
are being played back.
∫To delete scenes or still pictures from the thumbnail display
≥Switch to the thumbnail display of the scenes or still pictures to delete. ( l27)
1To u c h . ( l17)≥When the thumbnail display is 1 scene display or Highlight &
Time Frame Index, the scene or still picture being displayed is
deleted.
2Touch [ALL SCENES], [MULTI] or...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-88.png "Page 89
- 89 -
¬Change the mode to .
∫ To delete the scene or still picture being played back
Touch while scenes or still pictures to be deleted
are being played back.
∫To delete scenes or still pictures from the thumbnail display
≥Switch to the thumbnail display of the scenes or still pictures to delete. ( l27)
1To u c h . ( l17)≥When the thumbnail display is 1 scene display or Highlight &
Time Frame Index, the scene or still picture being displayed is
deleted.
2Touch [ALL SCENES], [MULTI] or...")
![Page 90
- 90 -
4(When [MULTI] is selected in Step 2)
Touch [Delete].
≥To continuously delete other scenes/still pictures, repeat Steps 3-4.
When you stop deleting halfway:Touch [CANCEL] while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled cannot
be restored.
To complete editing:Touch [Return].
≥You can also delete scenes by touching , selecting [EDIT SCENE] # [DELETE] # [ALL
SCENES], [MULTI] or [SINGLE].
≥ You can also delete still pictures by touching ,...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-89.png "Page 90
- 90 -
4(When [MULTI] is selected in Step 2)
Touch [Delete].
≥To continuously delete other scenes/still pictures, repeat Steps 3-4.
When you stop deleting halfway:Touch [CANCEL] while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled cannot
be restored.
To complete editing:Touch [Return].
≥You can also delete scenes by touching , selecting [EDIT SCENE] # [DELETE] # [ALL
SCENES], [MULTI] or [SINGLE].
≥ You can also delete still pictures by touching ,...")
![Page 91
- 91 -
Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥Change the mode to and touch the play mode select icon. Then, select the AVCHD
scene. ( l27)
1Select the menu.
2Touch the scene with a part to delete.
3Set the section to delete by touching and sliding
the top and bottom section selection buttons .
≥It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. ( l76)
4Touch [ENTER].
5Confirm (play back) the...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-90.png "Page 91
- 91 -
Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥Change the mode to and touch the play mode select icon. Then, select the AVCHD
scene. ( l27)
1Select the menu.
2Touch the scene with a part to delete.
3Set the section to delete by touching and sliding
the top and bottom section selection buttons .
≥It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. ( l76)
4Touch [ENTER].
5Confirm (play back) the...")
![Page 92
- 92 -
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene.
Any unwanted parts in the scene can be deleted after dividing.
≥Change the mode to and touch the play mode select icon. Then, select the AVCHD
scene. ( l27)
1Select the menu.
2Touch the scene to be divided.
3Touch to set the dividing point.≥It is convenient to use Slow-motion Playback and Frame-by-frame
Playback. ( l76)
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-91.png "Page 92
- 92 -
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene.
Any unwanted parts in the scene can be deleted after dividing.
≥Change the mode to and touch the play mode select icon. Then, select the AVCHD
scene. ( l27)
1Select the menu.
2Touch the scene to be divided.
3Touch to set the dividing point.≥It is convenient to use Slow-motion Playback and Frame-by-frame
Playback. ( l76)
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and...")
![Page 93
- 93 -
Dividing a scene to partially delete (iFrame/MP4)
Divide the iFrame scene or the scene saved as MP4, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes deleted by dividing cannot be restored.
≥Change the mode to and touch the play mode select icon. Then, set to [iFrame] or
[MP4]. ( l27)
1Select the menu.
2Touch the scene to be divided.
3Touch to set the dividing point.≥It is convenient to use Slow-motion Playback and...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-92.png "Page 93
- 93 -
Dividing a scene to partially delete (iFrame/MP4)
Divide the iFrame scene or the scene saved as MP4, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes deleted by dividing cannot be restored.
≥Change the mode to and touch the play mode select icon. Then, set to [iFrame] or
[MP4]. ( l27)
1Select the menu.
2Touch the scene to be divided.
3Touch to set the dividing point.≥It is convenient to use Slow-motion Playback and...")
![Page 96
- 96 -
You can combine the relayed scene (l63) in the built-in memory and the continued scene in
the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay Recording
≥ Change the mode to and touch the play mode select icon. Then, select the AVCHD
scene. ( l27)
1Insert the SD card that was used for Relay Recording.
2Select the menu.
3When the confirmation message appears, touch [YES].≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are...](http://img.usermanuals.tech/thumb/58/64306/w64_hc-v520_adv_en_om_d-95.png "Page 96
- 96 -
You can combine the relayed scene (l63) in the built-in memory and the continued scene in
the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay Recording
≥ Change the mode to and touch the play mode select icon. Then, select the AVCHD
scene. ( l27)
1Insert the SD card that was used for Relay Recording.
2Select the menu.
3When the confirmation message appears, touch [YES].≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are...")
- 91 - Deleting part of a scene (AVCHD) Unnecessary part of an AVCHD scene can be deleted. The deleted scenes cannot be restored. ≥Change the mode to and touch the play mode select icon. Then, select the AVCHD scene. ( l27) 1Select the menu. 2Touch the scene with a part to delete. 3Set the section to delete by touching and sliding the top and bottom section selection buttons . ≥It is convenient to use Slow-motion Playback and Frame-by- frame Playback. ( l76) 4Touch [ENTER]. 5Confirm (play back) the scene after editing by touching [YES].≥A confirmation message appears when [NO] is touched. Proceed to Step 7. 6Stop the playback.≥A confirmation message appears. 7Touch [ENTER].≥Repeat Steps 2-7 to continuously delete parts from other scenes.To complete editingTouch [Return]. ≥Deleting a part of a scene cannot be performed when there are 99 scenes in a single date. ≥ It may not be possible to delete part of a scene with a short recording time. ≥ The scene will be divided into two scenes when the middle part of a scene is deleted. ≥ The relay information is deleted when part of a scene that was relay recorded is deleted, making it impossible to perform the Relay scene combining. ( l96) : [EDIT SCENE] # [SECTION DELETE] MENU 0h00m15s 0h00m15s 0h00m15s HC-V520M
- 92 - Dividing a scene (AVCHD) It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted after dividing. ≥Change the mode to and touch the play mode select icon. Then, select the AVCHD scene. ( l27) 1Select the menu. 2Touch the scene to be divided. 3Touch to set the dividing point.≥It is convenient to use Slow-motion Playback and Frame-by-frame Playback. ( l76) ≥ Touch [YES] to continue dividing the same scene. To continue dividing other scenes, touch [NO] and repeat Steps 2-3. 4Touch [Return] to complete dividing.≥Unwanted parts can be deleted. ( l89) To delete all the divided points ≥The scenes that were deleted after division cannot be recovered. ≥You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes. ≥ It may not be possible to divide scenes with a short recording time. ≥ Data that has been recorded or edited on another device cannot be divided and the divided points cannot be deleted. ≥ If personal information in the divided scenes is deleted, the personal information is deleted when the divided scenes are canceled. : [EDIT SCENE] # [DIVIDE] # [SET] : [EDIT SCENE] # [DIVIDE] # [CANCEL ALL] MENU 0h00m15s 0h00m15s 0h00m15s MENU
- 93 - Dividing a scene to partially delete (iFrame/MP4) Divide the iFrame scene or the scene saved as MP4, and delete unnecessary parts. This divides the recorded scenes in two and deletes the front half or back half. The scenes deleted by dividing cannot be restored. ≥Change the mode to and touch the play mode select icon. Then, set to [iFrame] or [MP4]. ( l27) 1Select the menu. 2Touch the scene to be divided. 3Touch to set the dividing point.≥It is convenient to use Slow-motion Playback and Frame-by- frame Playback. ( l76) ≥ Set the dividing point so there will be 2 seconds or more for the part for deletion, and 3 seconds or more for the part to be kept. 4Touch the part for deletion. 5Touch [YES] and confirm (play back) the part for deletion.≥A confirmation message appears when [NO] is touched. Proceed to Step 7. 6Stop the playback.≥A confirmation message appears. 7Touch [YES].≥To continue dividing and deleting other scenes, repeat Steps 2-7.To complete editingTouch [Return]. ≥It may not be possible to divide scenes with a short recording time. ≥ The actual division may slightly slip off the previously designated dividing point. : [EDIT SCENE] # [SPLIT&DELETE ]MENU 0h00m15s 0h00m15s 0h00m15s
- 94 - Deleting personal information Deletes Face Recognition information from scenes in which faces were recognized. ≥Change the mode to and touch the play mode select icon. Then, select the AVCHD scene. ( l27) ≥ Face Recognition information is not recorded in the scenes recorded in iFrame or the scenes saved as MP4. 1Select the menu. 2Touch the desired scenes with personal information to be deleted.≥ appears at scenes for which faces were recognized. will change to (red) when touched. Touch the (red) again to cancel the operation. ≥ Up to 99 scenes can be selected in succession. 3Touch [Delete].≥To continuously delete other personal information, repeat Steps 2-3. ≥ Touch [Return] to complete the settings. When you stop deleting halfwayTouch [CANCEL] while deleting personal information. ≥ The personal information that has already been deleted when the deletion is canceled cannot be restored. Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥Change the mode to . 1Select the menu. * [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected transfer setting device in advance on the computer. 2Touch the scene/still picture to be protected.≥When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch the scene/still picture again to cancel the operation. ≥ Touch [Return] to complete the settings. : [VIDEO SETUP] # [DELETE PERSONAL INFO] : [VIDEO SETUP] or [PICT. SETUP] # [SCENE PROTECT] * MENU MENU
- 95 - Before copying, convert the scenes recorded in AVCHD to those with the image quality (MP4: 640k360/30p) that supports playback on a PC or uploading on the internet. ≥ Set the mode to , touch the play mode selection icon, and then select the AVCHD scene. ( l27) 1Select the menu. 2Touch the scene you want to convert to MP4.≥The scene selection is made as you touch it, and the indication appears on the thumbnail. To cancel the operation, touch the scene again. ≥ You can select up to 99 scenes in succession. 3Touch [Enter].≥Converted MP4 scenes are saved in the same media as those in AVCHD before the conversion. To stop converting to MP4 halfwayTouch [CANCEL] during format conversion. To exit the MP4 conversionTouch [Return]. ≥A scene recorded over a long time may take time. ≥ When converting and copying the scenes recorded in AVCHD to MP4 scene, the scene exceeding approximately 20 minutes is automatically divided. ≥ The settings for the copied motion pictures will be cleared if the protected motion pictures are copied. Advanced (Playback) Convert to MP4 : [EDIT SCENE] # [CONVERT TO MP4]MENU
- 96 - You can combine the relayed scene (l63) in the built-in memory and the continued scene in the SD card to be one into the SD card. A Built-in memory B SD card C Range of Relay Recording ≥ Change the mode to and touch the play mode select icon. Then, select the AVCHD scene. ( l27) 1Insert the SD card that was used for Relay Recording. 2Select the menu. 3When the confirmation message appears, touch [YES].≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not deleted.) 4Touch [EXIT] when the relay scene combining complete message is displayed. ≥The thumbnail view of the SD card is indicated. ≥ Relay Recording information will be deleted when the relay scenes are combined, and Relay Recording will be possible again. ≥ When the relayed scenes in the built-in memory or SD card are deleted, combining of the relayed scenes will not be possible. Advanced (Playback) Relay scene combining [HC-V520M] Relay-recorded sceneRelay scene combining : [EDIT SCENE] # [RELAY SCENE COMBINE] MENU
- 97 - To cancel relay information ≥When the relay information is canceled, combining of the relayed scenes will not be possible anymore. ≥The personal information of the relayed scene in the built-in memory or SD card is deleted, the personal information of the combined relay scene is deleted. : [EDIT SCENE] # [RELAY INFO CANCEL] Combining of the relay scene cannot be performed if the available space on the SD card is less than the volume of the relayed scene in the built-in memory. It is recommended to combine the relay scene using the HD Writer AE 5.0. MENU
- 98 - ≥Use the HDMI mini cable (supplied). ≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high- definition TV and then play back the recorded high-definition images, you can enjoy them in high resolution with high quality sound. 1Connect this unit to a TV. ≥Check that the plugs are inserted as far as they go. ≥ Always use the supplied HDMI mini cable or a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional). Advanced (Playback) Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. A High quality 1 HDMI terminal 2 Video terminal AHDMI mini cable (supplied) ≥ Be sure to connect to the HDMI terminal. ≥ Connecting with a HDMI mini cable ( l100 ) ≥ Playback using VIERA Link ™ ( l 101 ) B Composite video cable (commercially-available) Picture quality 1 High-definition images when connecting to HDMI terminal 2 Standard images when connecting to video terminal A/V
- 99 - 2Select the video input on the TV.≥Example: Select the [HDMI] channel with a HDMI mini cable. Select the [Video 2] channel with a Composite video cable. (The name of the channel may differ depending on the connected TV.) ≥ Check the input setting (input switch) and the audio input setting on the TV. (For more information, please read the operating instructions for the TV.) 3Change the mode to to play back.≥When connected to the TV, sound in Playback Mode is not output from this unit. Also, since the volume cannot be adjusted with this unit, adjust the volume of the TV. ≥ Image and audio is not output from this unit while using the Wi-Fi function. ∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the TV setting.) ≥If you set the option to [4:3] and connect this unit and the TV with the Composite video cable, images may be displayed in a reduced size. Example of images with a [16:9] aspect ratio on a regular TV (4:3) ≥ If a wide-screen TV is connected, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.) ∫ To display the on-screen information on the TV When the menu setting is changed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. * This setting is only available in Motion Picture Recording Mode or Still Picture Recording Mode. : [SETUP] # [TV ASPECT] # [4:3] [TV ASPECT] setting [16:9][4:3] MENU: [SETUP] # [EXT. DISPLAY] # desired setting [SIMPLE]*:Information partially displayed [DETAIL]:All information displayed [OFF]:Not displayed MENU Refer to the following support site for information about Panasonic TVs with an SD card slot for playing back your pictures. http://panasonic.net/ ≥ It may not be possible to play back scenes on the TV depending on the [REC MODE]. ≥ For details on how to play back, please read the operating instructions for the TV.
- 100 - Connecting with a HDMI mini cable Select the desired method of HDMI output. ≥[AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please read the operating instructions for the TV.) ≥ Images may not be displayed on the television for several seconds in some cases, such as when changing between scenes. : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p] MENU