Panasonic Hc V520 Owners Manual

- 141 -
You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” 
and USTREAM.
1Press Wi-Fi button. 
2Touch [Live Cast].≥If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them 
according to the screen.
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
∫ To...

- 142 -
Touch .≥/ /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To start the live broadcast
Touch .≥ / /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To stop the live broadcast
Touch .
≥When   (gray) is displayed, unsent data is present. Wait until 
the unsent data is sent and   is displayed.
To exit the Live Cast Mode:Touch [EXIT] or press...

- 143 -
Touch   to display the live broadcast setting screen.
≥/ /  will disappear when no touch function is 
performed for a specific period of time. To display them again, 
touch the screen.
∫ To configure the e-mail delivery settings
You can make the delivery setting of a broadcast notification 
e-mail and the setting for the scheduled time and date of the 
broadcast indicated in the e-mail.
1 Touch [E-MAIL SETUP].
2 Touch [ON] or [OFF].
3 (When [ON] is selected)
To set the scheduled broadcast date...

- 144 -
You can confirm the recording screen of this unit from outside using a smartphone.
≥Perform the home monitoring operation on the smartphone. ( l147)
≥ If this is the first time you are configuring the home monitor settings, please read page  145.
∫Connecting with Android (NFC-compatible) device
≥Turn on the NFC function
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a 
Wi-Fi connection between this unit and the smartphone.
This function can be used...

- 145 -
∫
If the device is Android (n on-NFC-compatible) or iOS
1Press Wi-Fi button and touch [Home Cam]. 
2Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance sc reen is displayed, select [NO].
≥ Use the smartphone to start home monitor.
When configuring the home monitor settings for the first time
∫ Connecting with Android (NFC-compatible) device
≥Turn on the NFC function
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a 
Wi-Fi...

- 146 -
∫
When configuring the home monitor settings using QR code
1Press Wi-Fi button. 
2Touch [Home Cam].
3Touch [QR code].≥QR code is displayed on the screen of this unit.
4Start up the smartphone application “Image App”.
5Display the screen of a connection setup to home monitor from the menu of a 
smartphone.
6Scan QR code displayed on this unit with the smartphone.≥A confirmation screen is displayed on the screen of a smartphone. Touch [YES] to start home 
monitor.
To exit home monitoring:Touch...

- 147 -
Refer to [Help] in the “Image App” menu for further details on how to operate.∫What you can operate with a smartphone
≥Confirm the condition inside the house
The monitoring video can be confirmed.
≥ The monitoring image can be recorded as a video or a still picture.
≥ It cannot be confirmed with multiple smartphones simultaneously.
≥ Depending upon the environment in which the device is used, motion picture may be like a frame 
rate is low.
≥ Voice message
You can talk to each other like portable...

- 148 -
≥Setting cannot be performed while operating monitoring with a smartphone.Touch [Setup] and select desired setting.
∫ [Home Monitor Connect]
You can display the registration screen for a Device ID and Password.
∫[Remote Voice Level]
You can set the initial remote voice level and speaker volume level of the remote voice function.
≥The mode cannot be switched to another one during home monitoring operations.
≥ Although home monitoring can be performed with the battery, we recommend you use the AC...

- 149 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch desired menu item.
You can add or delete wireless access points, or rearrange the display order of wireless access points.≥Up to 3 wireless access points can be set.
≥ Please refer to page 126 for details about [Wireless Settings].
To add a wireless access point
1 Touch the part where no wireless access points 
are displayed.
2...

- 150 -
If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in 
Motion Picture Recording Mode or Still Picture Recording Mode) so that power consumption is 
reduced.
≥When the LCD monitor is turned off, you can display the screen by touching it.
≥ If the Wi-Fi connection is turned off, this unit will turn off automatically approximately 30 minutes 
later.
This will set/clear the Password to limit the startup of the Wi-Fi setting menu.
By setting the Password,...