Panasonic Hc V520 Owners Manual

- 131 -
Connecting to the smartphone
Check if your smartphone is compatible with WPS≥Customers in the US should connect by entering an SSID and Password or scanning the QR 
code.
jIf your smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If your smartphone is not compatible with WPS:
Connect by entering an SSID and Password
You can also connect by scanning the QR code displayed on this unit with a smartphone. ( l132 )
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch...

- 132 -
∫
Connecting with QR code
1Press Wi-Fi button. 
2Touch [Wi-Fi Setup].
3Touch [Direct Connection].
4Touch [Change connection type].
5Touch [QR code].≥QR code is displayed on the screen of this unit.
6Start up the smartphone application “Image App”.
7Scan QR code displayed on this unit with the smartphone.≥When using an iOS device, the profile install screen will be displayed on the smartphone. After 
installing, close the displayed screen by pressing the Home button and relaunch the “Image App”....

- 133 -
≥Please refer to the operating instruction of the device in use for details about the setting of the 
wireless access point or smartphone.
If the Wi-Fi connection cannot be established
ProblemCheck points
It cannot connect to the 
wireless access point.
The wireless access point 
is not detected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi 
connection will be aborted.
Reset the...

- 134 -
It takes long time every 
time to connect to a 
smartphone.≥It may take longer time to connect depending on the Wi-Fi 
connection setting of the smartphone, but it is not a 
malfunction.
This unit is not displayed 
in the Wi-Fi setting screen 
of the smartphone.
≥ Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi 
settings of the smartphone.
The Wi-Fi connection is 
disconnected immediately.
≥ If there is a setting for avoiding poor connections in the Wi-Fi 
setting menu of the Android...

- 135 -
Using a smartphone, you can perform record/playback operations from a remote location or upload 
motion pictures and still pictures recorded in this unit on SNS (Social Networking Service).
AWhen connecting to a smartphone
B When connecting to a wireless access point
≥Refer to [Help] in the “Image App” menu for further details on how to operate.
∫ If the device is Android (NFC-compatible)
≥Turn on the NFC function of your smartphone.
Using the NFC (Near Field Communication) function, you can...

- 136 -
≥This unit will be turned on if it is touched on the   by a smartphone even when this unit was 
turned off using the LCD screen.
If you touch the second smartphone when this unit has already been connected 
to the first one
The remote operation with the first smartphone that  has been connected to this unit will be cut off, 
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the 
smartphone during remote...

- 137 -
∫
If the device is Android (NFC-compatible)
≥Turn on the NFC function
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a 
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later). 
(Except for some models)
1Connect the smartphone to a wireless access point.≥ When you connect using NFC for the first time,  please make connection of this unit and a 
wireless...

- 138 -
To exit remote operation:Touch [EXIT] or press Wi-Fi button.
≥The message is displayed. Touch [YES] to close the indication.
≥After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC 
communication by touching the smartphone on   of this unit. (If you have turned off this unit 
with the power button, this unit will not turn on by touching the smartphone on   of this unit)
≥ You can register up to five smartphones. When the number exceeds five,...

- 139 -
∫
When Recording Mode
≥Turning the unit off
≥ Selecting a mode
≥ Recording motion pictures/still pictures
≥ Selecting a media to record
≥ Using the zoom (Available in the medium or fast speed)
≥ Selecting a iA/MNL mode
≥ White Balance
≥ Recording format
≥ Backlight Compensation
≥ Picture size
≥ Self-timer
∫ When Playback Mode
≥Playback
jThe scenes recorded in iFrame cannot playback
≥ Selecting a media to playback (SD card/Built-in memory)
≥ Switching the media (AVCHD/MP4/still picture)
≥ Delete
≥...

- 140 -
Connecting this unit to a DLNA-compatible device via Wi-Fi, you can play back scenes and still 
pictures on the device.
ADLNA-compatible Device
1Press Wi-Fi button. 
2Touch [DLNA Play].≥If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is canceled.
≥ When the connection is complete, the screen of this unit turns off. To display it again, touch the 
screen.
3Select this unit (SSID)...