Panasonic Hc V210 Owners Manual

- 81 -
Copy selected files
1Connect this unit to the USB HDD to prepare for copying. (l78)≥You cannot supply power to the USB HDD from this unit.
2Select [Copy selected files] using the cursor button, then press the ENTER 
button.
≥It can also be set by selecting [COPY] from the menu.
3/
Select [YES] and press the ENTER button.
Select the media you wish to copy and press the ENTER button.
≥Please refer to page 76  for information on copying files between the SD card/built-in memory.
4Following the screen...

- 82 -
Playing back the USB HDD
≥Only mortion picture/still picture that have been copied by connecting this unit to the 
USB HDD or created with HD Writer LE 2.0 can be played back.
A USB Connection Cable (supplied with recommended USB HDD)
B recommended USB HDD (commercially-available)
≥ Insert the plugs as far as they will go.
1Connect this unit to the USB HDD to prepare for playback. ( l78)≥When playing back on a TV, connect this unit to the TV. (l 71)
2Select [Playback HDD] using the cursor button...

- 83 -
∫
Check before dubbing
Check the equipment used for dubbing.
* Some equipment may not be compatible with high-definition (AVCHD) picture quality. In such a 
case, connect with the AV cable and dub with standard picture quality. ( l86)
≥ For the positions of the SD card slot, USB terminal, or terminal for connecting the AV cable, refer 
to the operating instructions of the equipment used.
≥ The iFrame scenes cannot be dubbed by inserting the SD cards or by connecting with the USB 
cable. To dub...

- 84 -
∫
To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥
To copy scenes or still pictures from the built-in 
memory to an SD card, see page  76.
∫ To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥ //
Use the AC adaptor to free you from worrying about the battery running down.
When the USB cable is connected to other equipment, the AC adaptor cannot be used. Please 
ensure that the battery is sufficiently charged.
≥ Turn on the...

- 85 -
2Select [RECORDER] using the cursor button on the unit and press the 
ENTER button.
≥When you select an option other than [RECORDER], reconnect the USB cable.
≥//When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button 
to turn the LCD monitor on.
3Select the media you wish to dub, then press the ENTER button.≥ When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button 
to turn the LCD monitor on.
4Dub through operations...

- 86 -
∫Dubbing using equipment without an SD card slot or a USB terminal, 
or using a video device
You can dub by connecting an AV cable.≥Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to  .
1Connect this unit to a video device and start playback on this unit.
2Start recording on the connected device.≥To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
≥If the date and...

- 87 -
Using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on 
the card, and save them on a PC or upload them on a file-sharing website via a wireless network.
≥Inserting an Eye-Fi card (commercially available) to the unit.
≥
(When using in the Recording Mode)Set the card to be used as the recording media(When using in the Playback Mode)Select the Playback Mode icon from the thumbnail screen, and set the media to   (card) 
( l 28)
Select the menu.
≥When...

- 88 -
∫
Using Eye-Fi direct mode
The files can be transferred directly from the Eye-Fi card to a smartphone or tablet without going 
through the access point when necessary setting is performed in a PC in advance.
≥Install the software supplied with the Eye-Fi card on your PC, and configure the Eye-Fi 
direct mode settings.
≥ Inserting an Eye-Fi card (commercially available) to the unit
Select the menu.
≥This mode is displayed only when [Eye-Fi TRANSFER] is set to [ON].
≥ The mode will be canceled using...

- 89 -
≥The Eye-Fi menu only appears when an Eye-Fi card is used.
≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to 
changes to the card specification etc.
≥ Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-
Fi card before use.
≥ When the endless memory function of the Eye-Fi card is set to on, the files transferred from the 
card may be deleted automatically.
≥ The Eye-Fi card may heat up as a result of the...

- 90 -
HD Writer LE 2.0
You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, 
DVD discs or SD cards using HD Writer LE 2.0, the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer LE 2.0 (PDF file) for details on how to use it.
∫
Smart wizard
The Smart wizard screen is automatically displayed when you connect this unit to a PC with 
HD Writer LE 2.0 installed. ( l98)
Copy to PC:
You can copy motion/still picture data to...