Panasonic Hc V210 Owners Manual

- 31 -
1Press the MENU button.
2Press 3/4/2/1 to select the top 
menu A, then press the ENTER 
button.
3Select the submenu  B using  3/4 
and press  1 or press the ENTER 
button.
4Select the desired item 
using 3/ 4/2/1 , and 
press the ENTER 
button to set. To get back to the previous screen
Press 
2 of the cursor button.
To exit the menu screenPress the MENU button.
∫ About the information display
Descriptions of the selected submenus and 
items displayed in St eps 3 and 4 are displayed.
∫About the...

- 32 -
Set the display method for the screen information display.
Please refer to page 72.
Please refer to page 20 .
It is possible to display and record the time at the travel destination by selecting your home region 
and the travel destination.
≥ Change the mode to  .
1 Select the menu.
≥If the clock is not set, adjust the clock to the current time. ( l20)
≥ When the [HOME] (your home region) is not set, the message appears. Press the ENTER button 
and proceed to 
St e p 3.2 (Only when setting your...

- 33 -
4(Only when setting the region of your travel destination)
Select [DESTINATION] using 
2/1 and press the ENTER button.≥When the home region is set for the first time, the screen for selecting home/travel destination 
appears after setting the home region successively. If the home region has already been set 
once, execute the menu operation for Step 1.
5 (Only when setting the region of 
your travel destination)
Select your travel destination 
using 
2/1 and press the 
ENTER button.
≥ Press  3 to...

- 34 -
When about 5 minutes have passed without any operation, this unit automatically turns off to save 
battery life.
≥This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in following 
cases:
jUsing the AC adaptor
*
jUsing the USB cable for PC etc.
j PRE-REC is used
j During playback of the slide show
* When [ECONOMY (AC)] is activated, this unit automatically turns off.
When about 30 minutes have passed without any operation while connecting the AC adaptor with 
this...

- 35 -
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 60% of the power used in recording pause mode 
is being consumed, so the recording time will be reduced.
≥ //
Quick Start will not work if there is no SD card inserted.
≥ Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no 
SD card inserted.
≥ Change the mode to  .
1 Select the menu.
2 Close the LCD monitor.
The status...

- 36 -
Starting and stopping of recording and unit on/off can be confirmed with this sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l105)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
≥When the AC adaptor is in use, the LCD monitor is set to   automatically.
≥ When the LCD...

- 37 -
Please refer to page 73.
Please refer to page 74 .
Please refer to page 72 .
Set to [YES] for changing the menu settings back to the default condition.
(Only when the mode is at the   position)
≥ Settings for [MEDIA SELECT]
*, [CLOCK SET] and [LANGUAGE] will not change.
* For users who have  //, this menu is not displayed.
Set the file number of the iFrame/MP4 and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001. ( l100 )
≥ To reset the folder...

- 38 -
Please be aware that if a medium is formatted, then all the data recorded on the medium will erase 
and cannot be restored. Back up important data on a PC, disc, etc. (l90)
*1  only
*2 / / Displayed when connecting a USB HDD. ( l78)
≥ /
Media selection screen is not displayed when the USB HDD is not connected. Select [YES] and 
press the ENTER button.
≥ Media selection screen is not displayed. Select [YES] and press the ENTER button.
≥ When formatting is complete, press MENU button to exit the...

- 39 -
The used space and remaining recordable time of the SD card and built-in memory can be checked.
≥Pressing the ENTER button switches between SD card and built-in memory display.
≥ When the mode switch is set to  , remaining recordable time for the selected recording format 
or recording mode is displayed.
≥ Press the MENU button to close the indication.
≥The SD card or built-in memory requires some space to store information and manage system 
files, so the actual usable space is slightly less than...

- 40 -
This item is used to start the unit demonstration.
(Only when the mode is at the   position)
≥If [DEMO MODE] is switched to [ON] and you press the MENU button when there is no SD card 
inserted and while this unit is connected to the AC adaptor, the demonstration automatically 
starts.
If any operation takes place, the demonstration is canceled. However if no operations take place 
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration, 
set [DEMO MODE] to...